PURE Moment Ambient Sleep Companion User Guide
- August 7, 2024
- Pure
Table of Contents
Take a Moment to read me
Moment Ambient Sleep Companion
For additional languages and help
Getting started
DAB radio
Switch to DAB Change station DAB Scan
Ensure the antenna is hanging vertically for the best possible DAB
reception. DAB signal strength
Signal strength is visible in 24h clock mode or in 12h clock mode only when
the signal is week. FM radio
Switch to FM
Change FM station Manual FM tune FM Scan FM signal strength
Signal strength is visible in 24h clock mode or in 12h clock mode only when
the signal is week.
Relaxing sounds
Play relaxing sounds
Sounds list Bluetooth
Switch to Bluetooth Pair new device When in pairing mode use the
Bluetooth settings on your phone or tablet to pair to “Moment”.
Paired successfully
Presets ( DAB, FM & Sounds )
Save a station / sound as a preset (Maximum 10) Remove a saved preset Recall a preset list
Joyful Listening.
support.pure-audio.com
DO NOT INGEST THE BATTERY, CHEMICAL BURN HAZARD
This product contains a coin/button cell battery. If the coin/button cell
battery is swallowed, it can cause severe internal burns in just 2 hours and
can lead to death.
Keep new and used batteries away from children. If the battery compartment
does not close securely, stop using the product and keep it away from
children. If you think batteries might have been swallowed or placed inside
any part of the body, seek immediate medical attention.
Avoid subjecting the battery to extremely low air pressure.
WARNING
KEEP OUT OF REACH OF CHILDREN
Swallowing can lead to chemical burns, perforation of soft tissue, and death.
Severe burns can occur within 2 hours of ingestion.
Seek medical attention immediately.
Add an alarm
-
Add new alarm
-
Alarm time
Set the time of day for the alarm to sound. -
Repeat
One time only alarm
Repeat alarm
Set which days of the week you would like the alarm to trigger. -
Source
Choose what source to use for the alarm. -
Source content (DAB, FM & Sounds only)
Choose your radio station or relaxing sound to wake up to. -
Alarm volume
Set the maximum alarm volume.
Setting the lowest volume level will mute the audio and only use the light if set. -
Sound behaviour
Alarm audio rises gently up to the set volume level.
Alarm audio begins at the saved set level instantly. -
Light behaviour
Light gently rises 20 minutes before the audible alarm.
Light turns on at full brightness when the alarm starts. -
Alarm saved
Modify alarms
Enable / Disable
Tap the select dial to turn the alarm On or Off.
The On/Off indicator will update. Edit / Delete
Snooze or stop alarm
Snooze alarm Stop alarm
Pause alarms
Enable and disable alarms One switch to enable all your currently active
alarms or disable them in one convenient action.
Pause your alarms for moments when you want an alarm free morning or for
holidays and you don’t want to disturb your neighbours.
Alarm status icons
Alarm battery backup
If mains power is lost only the next alarm will trigger with a loud backup
alarm tone.
If the backup alarm tone starts, slide the alarm switch to Off position to
stop it.
If you want to unplug Moment from mains power and do not want the backup alarm
to trigger, slide the alarm switch to the Off position.
Battery needs replacing
If the alert battery icon appears please replace the battery. Replacing
battery
- Using a small screw driver remove the battery door compartment on the back of the product.
- Pull the battery door out.
- Take note of the battery orientation: Negative (-) side face up.
- Replace with a new coin cell: CR2032 – 3V – Lithium.
- Return the door and screw back in to place.
Support light
Turn off / on Adjust light brightness
Sleep timer
Start the sleep timer Check or change the sleep timer Stop sleep timer
Settings
Brightness
Select different brightness options for when listening and when in standby.
Auto: High | Automatic brightness levels for normal use. |
---|---|
Auto: Low | Automatic brightness levels for those with sensitive sight. |
Manual | Set your own fixed brightness level. |
Clock, Time & Date
1.1 – 12 / 24
Set the clock face to 12 or 24 hour clock.
1.2 – Time / Date
Auto sync: Automatically acquire time and date.
Manual: Set time and date. Language
Change your preferred language.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>