PRIMASTER PMAT 2025-1 Grass Trimmer Instruction Manual
- August 6, 2024
- PRIMASTER
Table of Contents
PRIMASTER PMAT 2025-1 Grass Trimmer Instruction Manual
TECHNICAL DATA
Technical changes reserved.
WARNING : The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration
emission may differ. This may significantly increase the exposure level over
the total working period.
The vibration emission level will vary because of the ways in which a power
tool can be used and may increase above the level given in this information
sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the
times when the tool is shut down or when it is running but not actually in
use. This may significantly reduce the vibratory load over the total working
period.
Identify additional safety measures to protect the operator from the effects
of vibration such as maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
SAFETY INSTRUCTIONS
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly.
Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. The operator is responsible for accidents or risks to third parties.
Keep children and other persons including animals in a safe distance when using the appliance. Minimum safe distance is 15 m.
Do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Local regulations may stipulate the minimum age of the user.
Wear personal protective equipment.
- Always wear goggles when using the machine.
- Wear ear protectors!
- Wear solid shoes and long trousers.
- Do not wear loose clothing or jewels. Hear, clothing and gloves must be out of reach of moving parts as they could get caught by the rotating parts. Do not use the appliance when barefooted or in open sandals.
Provide adequate lighting or good lighting conditions when working with the machine. Poor lighting/light conditions represent a high safety risk.
Do not use the appliance in bad weather, especially when there is a risk of storm.
Do not use the appliance if you are tired, ill, under influence of drugs, alcohol drinks or medicaments.
Do not overreach. Keep proper footing and balance at all times.
Walk! Never run!
Be careful when going backwards – risk of tripping!
Provide a safe posture, especially on slopes.
Despite the observance of the operating instructions there still may be some hidden residual risks.
Damage to health arising from vibrations to hand and arms if the device is used for a long time or if the device is not guided and evaluated properly.
Vibration damping systems are no guaranteed protection against white finger disease or carpal tunnel syndrome. Therefore, it is necessary to carefully check the state of your fingers and wrist if you have regularly used the appliance for a long time. If any symptom of the diseases above appears, seek medical advice immediately. To reduce the white finger disease risk, keep your hands warm and take regular breaks during your work.
Hearing damage
A longer stay in the immediate vicinity of the running unit may cause
hearing damage. Wear ear protectors!
When working with the device, a certain level of noise cannot be avoided. Noisy work should be scheduled for hours, during which it is allowed by statute or other local regulations. Adhere to any applicable rest times and limit your working time to the necessary minimum time. For your personal protection and the protection of people nearby, suitable hearing protection must be worn.
Please do also consider any local regulations concerning noise protection!
Warning This power tool generates an electromagnetic field during operation. Under certain circumstances, this field may affect active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend that individuals with medical implants consult your physician and the manufacturer of the medical implant before operating the machine.
Risk of injury
Rotating blades may lead to serious injuries by cutting or amputating parts
of the body.
-
Be careful to avoid injury by the cutting tools. Careful appliance handling reduces the risk of injury by knife.
-
Always have your arms and legs in safe distance from the cutting mechanism, in particular after turning the engine on.
Never touch under the housing body when the engine is running. Wear protective shoes. -
Never use the machine with a damaged cover or protective device or without cover or protective devices.
Thrown-off stones or soil may lead to injuries.
- Carefully check the terrain where the appliance is going to be used and remove all objects that could get caught or thrown off by the appliance such as stones, branches, wires, animals, etc.
- Wear safety goggles when working.
The appliance must not be used if damaged or safety equipment is defective.
Replace any worn-out and damaged parts.
Check all screw and plug-in connections and protective equipment if firm and
tightened properly and whether all moving parts are running smooth whenever
the appliance is to be put into operation.
The protective equipment on the appliance is strictly prohibited to be
disassembled, changed, used in conflict with the designation and it is
prohibited to attach any protective equipment of other manufacturers.
Never mount any metal cutting elements.
Connection and extension cables should be kept away from the cutting device to
avoid damage which could lead to contact with live parts.
The ON/OFF switch and safety switch must not be locked. Stop the device and
disconnect it from the power supply
- whenever you leave the lawnmower
- before removing blockages
- efore checking, cleaning or working on the device
- after contact with a foreign object, to check the device for damage
If the appliance starts abnormally vibrating, switch the engine off and search
for the cause immediately. Generally, vibrations are a warning against
operating failure.
When being blocked, turn the appliance immediately off and remove the jammed
item.
Carry the string trimmer with the handle, with the blade being off (idle). The
battery must be removed for transport or storage of the string trimmer.
Careful appliance handling reduces the risk of injury by knife.
The appliance must be stored in a dry place and protected from frost.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool.
SAFETY INSTRUCTIONS BATTERY CHARGER
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
supervision.
Do not try to charge non-rechargeable batteries with this charger.
To avoid danger, a damaged mains supply pipe must be replaced by the manufacturer.
Read and understand the operating instructions before using the appliance.
Familiarise with the control elements and how to use the appliance properly.
Abide by all the safety measures stated in the service manual. Act responsibly
toward third parties. The operator is responsible for accidents or risks to
third parties.
The appliance must be stored in a dry place and protected from frost.
No metal parts may enter the shaft to slide the battery (risk of short
circuit).
Never use the charger in moist or wet conditions. Suitable for indoor areas
only.
Make sure the system voltage corresponds to the charger type plate details.
There is a risk of electric shock.
Cable connections to be separated by pulling the plug only. Pulling the cable
could damage both the cable and plug. As a result, electric safety would no
longer be guaranteed.
Never use the charger when the cable, plug or the machine is damaged by
external influences. In case damage let repaired in authorized workshop
Make sure the cooling function is not limited by covering the cooling slots.
Do not operate the appliance near heat sources or on a flammable surface.
Never open the charger. Contact a specialised workshop in case of any defect.
The outer battery surface must be clean and dry before the battery starts
being charged.
Chargers are exclusively suitable to charge these replaceable batteries
Typ LI 22-2 (LBC2025-1, 2,5 Ah)
Charging any other battery is not allowed.
SYMBOLS
SPECIFIED CONDITIONS OF USE
The string trimmer has been designed to cut grass and weed in gardens and
along flower beds and borders.
Do not use this product in any other way as stated for normal use. Not
observing general regulations in force and instructions from this manual does
not make the manufacturer liable for damages.
Risk of injury
The appliance must not be used to cut hedges, hard branches and wood or to
crush material for compost.
Do not use the appliance to cut grass that is not on the ground, e.g. grass
growing on walls, rocks, etc.
Do not use metal wire or plasticsheathed metal wire of any kind in the cutting
head. This may lead to serious injuries of the operator.
BATTERY
Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
Vapours may leak out in case of unauthorised use or when using a damaged
accumulator. Bring fresh air and seek medical advice if experiencing
difficulties. Vapours may irritate the respiratory system.
Risk of fire! Risk of explosion!
Never use damaged, defective or deformed accumulators. Never open or damage
the accumulator or let it fall on the ground.
Never charge the battery in an environment with acids and easily flammable
materials.
Protect the battery against heat and fire.
Battery to be used at the ambient temperatures between 10°C and +40°C only.
Never put the battery on heaters and do not expose it to strong sunlight for a
long time.
After being subject to heavy load, let the battery cool down first.
Short circuit – do not bridge the accumulator contacts with metal parts.
The accumulator must be packaged (plastic bag, box) or accumulator contacts
must be sealed up for accumulator disposal, transport or storage.
MAINTENANCE
Take the replaceable battery from the appliance before any extension, cleaning and servicing works. Wait until all rotating parts have stopped and the appliance has cooled down.
If the battery is to remain unused for a period of time, it must be charged to
approx. 50% and stored at room temperature (5°C o 20°C). In the event of a
prolonged period of storage, the battery must be charged once per year in
order to avoid complete discharge.
Keep the device, in particular the air vents, clean at all times. Never spray
water on the device body! Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp cloth making.
Use only original accessories and original spare parts. Using other spare
parts can result in accidents/injuries of the user. The manufacturer will not
be liable for any such damage.
Please contact our service department if you need accessories or spare parts.
Only a regularly maintained and treated appliance can serve as a satisfactory
aid. Insufficient maintenance and care can lead to unforeseen accidents and
injuries.
Repairs and works specified in these Instructions may only be performed by
qualified authorised staff.
DISPOSAL
If your device should become useless somewhere in the future or you do not need it any longer, do not dispose of the device together with your domestic refuse, but dispose of it in an environmentally friendly manner.
Please dispose of the device itself at an according collecting/recycling point. By doing so, plastic and metal parts can be separated and recycled. Information concerning the disposal of materials and devices are available from your local administration.
Batteries are not to be put into the rubbish. As a consumer you are legally obliged to return used batteries and accumulators. At the end of the duration of your apparatus, the batteries or accumulators have to be taken from the apparatus, disposing of them separately. You have the possibility of delivering your old batteries and accumulators to the local collecting points of your municipality or to your dealer or to the distribution centers.
Dispose of the batteries when discharged. We recommend applying an adhesive tape on the poles to protect them against short circuit. Never open the battery.
WARRANTY
Warranty provider:
ikra GmbH , Schlesier Straße 36, D-64839 Münster-Altheim, Germany.
The warranty is valid for 24 months from the handover date. The original
invoice or a copy of the invoice serves as proof. The warranty is only
intended for consumers. A consumer is any natural person who concludes a legal
transaction for purposes which can predominantly neither be attributed to his
commercial nor to his selfemployed professional activity. The warranty is
valid for all New goods purchased within the EU, UK and Switzerland. The
purchaser’s warranty claims arising from the purchase contract with the seller
as well as statutory rights are not affected by this warranty – the claiming
of the aforementioned rights is free of charge. Wearing parts, rechargeable
batteries and defects caused by the use of non fitting accessories, repair
with parts that are not original parts of the manufacturer, use of force,
strokes and breaking as well as mischievous overloading of the motor are
excluded from this warranty. Warranty replacement does only include defective
parts, not complete devices. Warranty repair shall exclusively be carried out
by authorized service partners or by the company‘s customer service. In the
case of any intervention of not authorized personnel, the warranty will be
held void.
Postage and shipping costs within Germany are borne by ikra GmbH in the case
of a guarantee.
additional warranty period – Warranty provider:
Globus Fachmärkte GmbH – Primaster
The warranty period is additional 60 months. The original invoice or a copy of the invoice serves as proof. Wearing parts, rechargeable batteries and defects caused by the use of non fitting accessories, repair with parts that are not original parts of the manufacturer, use of force, strokes and breaking as well as mischievous overloading of the motor are excluded from this warranty. Warranty replacement does only include defective parts, not complete devices. Warranty repair shall exclusively be carried out by authorized service partners or by the company‘s customer service. In the case of any intervention of not authorized personnel, the warranty will be held void. The warranty shall not apply to commercial use of the product.
All postage or delivery costs as well as any other subsequent expenses will be borne by the customer. The laws of the Fed- eral Republic of Germany shall apply to this contract, with the exception of the UN Convention on the International Sale of Goods (CISG).20230725
EC DECLARATION OF CONFORMITY
We, ikra GmbH, Schlesierstraße 36, D-64839 Münster , declare under our
sole responsibility that the Cordless Grass trimmer PMAT 2025-1 , to which
this declaration relates correspond to the relevant basic safety and health
requirements of Directives
2006/42/EC (Guideline of Machines)
2014/30/EU (EMC-Guideline)
2000/14/EC+ 2005/88/EG (noise directive)
2011/65/EU (RoHS-Guideline)
For the relevant implementation of the safety and health requirements
mentioned in the Directives, the following standards and/or technical
specifcation(s) have been respected
EN 60335-1:2012+A11:2014+A13:2017+
A1:2019+A2:2019+A14:2019
EN 50636-2-91:2014
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 63000:2018
Conformity assessment method to annex VI / Directive 2000/14/EG+2005/88/EG
Notified Body:
0359, Intertek Testing & Certification Ltd.
Measured sound power level 89,4 dB (A)
Guaranteed sound power level 94 dB (A)
The year of manufacture is printed on the nameplate and can be additionally
retrieved via the consecutive serial number.
Serial number: 3225140000001 – 3225149999999
Münster, 2023-08-22
Yi Zhou
Head of Product Management
Ikra GmbH
Maintenance of technical documentation
Yi Zhou, Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
We, ikra GmbH, Schlesierstraße 36, D-64839 Münster , declare under our
sole responsibility that the Battery Charger JLH262102000G , to which this
declaration relates correspond to the relevant basic safety and health
requirements of Directives
2014/30/EU (EMC-Guideline)
2014/35/EU (Low Voltage Guideline)
2011/65/EU (RoHS-Guideline)
For the relevant implementation of the safety and health requirements
mentioned in the Directives, the following standards and/or technical
specifcation(s) have been respected:
EN 60335-1:2012+A11:2014+A13:2017
+A1:2019+A2:2019+A14:2019+A15:2021;
EN 60335-2-29:2021+A1:2021;;
EN 62233:2008;
EN IEC 55014-1:2021;
EN IEC 55014-2:2021;
EN IEC 61000-3-2:2019+A1:2021:
EN 61000-3-3:2013+A2:2021;
EN IEC 63000:2018
The year of manufacture is printed on the nameplate and can be additionally
retrieved via the consecutive serial number.
Münster, 2023-08-22
Yi Zhou
Head of Product Management
Ikra GmbH
Maintenance of technical documentation:
Yi Zhou, Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
We, ikra GmbH, Schlesierstraße 36, D-64839 Münster , declare under our
sole responsibility that the Battery LBC2025-1 to which this declaration
relates correspond to the relevant basic safety and health requirements of
Directives 2014/30/EU (EMC-Guideline)
For the relevant implementation of the safety and health requirements
mentioned in the Directives,, the following standards and/or technical
specification(s) have been respected:
EN IEC 55014-1:2021
EN IEC 55014-2:2021
The year of manufacture is printed on the nameplate and can be additionally
retrieved via the consecutive serial number.
Münster, 2023-08-22
Yi Zhou
Head of Product Management
Ikra GmbH
Maintenance of technical documentation:
Yi Zhou, Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
SERVICE
Latest service adresses can be found under: www.ikra.de
BGR8 Ltd. c/o Seabourne Group
UK/N.Ireland: 0344 824 3524
Service.GB@ikra.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>