DIGITALAIRE Conair Infiniti PRO Digital Aire Drying Wand Instruction Manual

DIGITALAIRE Conair Infiniti PRO Digital Aire Drying Wand

Product Information

Specifications

• Removable Magnetic Filter for easy cleaning
• Ultra-Care Anti-Frizz Technology with advanced plasma ions
• Multiple airflow/temperature settings
• Volumizing brush, styling pick, and styling guide included
• Drying and straightening brush functionality

Product Usage Instructions

Cleaning the Removable Magnetic Filter

A clean filter optimizes airflow for fast drying. Clean the filter every month by gently wiping away debris with your fingers or a soft cloth.

Using Ultra-Care Anti-Frizz Technology

Activate the advanced plasma technology to eliminate frizz and flyaways for smooth hair.

Airflow/Temperature Settings

Adjust the settings based on your hair type and desired styling results.

Styling with Volumizing Brush, Styling Pick, and Styling Guide

Follow the included styling guide for best results when using the volumizing brush and styling pick.

Drying and Straightening Brush

Use the brush to dry and straighten hair effectively. Ensure the rear air filter is kept away from hair during use.

FAQ

• Q: What should I do if the ALCI LED indicator light is flashing continuously?
  • A: If the ALCI LED indicator light is flashing continuously, stop using the appliance and return it to an authorized service center for inspection.
• Q: How often should I clean the removable magnetic filter?
  • A: Clean the filter every month to maintain optimal drying performance.
• Q: Can I use this product with other electrical appliances on the same circuit?
  • A: Avoid using this dryer on the same circuit with other electrical products to prevent tripping a 15 amp circuit breaker or blowing a fuse.

This message about…

• GROUND
• FAULT
• CIRCUIT
• INTERRUPTERS

*IF YOU MUST USE YOUR HAIR DRYER IN THE BATHROOM, INSTALL A GFCI NOW!**

• Your local electrician can help you decide which type is best for you – a portable unit that plugs into the electrical outlet or a permanent unit installed by your electrician. The National Electrical Code now requires GFCIs in the bathrooms, garages, and outdoor outlets of all new homes.
• WHY DO YOU NEED A GFCI? Electricity and water don’t mix. If your hair dryer falls into water while it’s plugged in, the electric shock can kill you…even if the switch is off. A regular fuse or circuit breaker won’t protect you under these circumstances. A GFCI offers you far greater protection.
• A GFCI can save your life! Compared to that, the price is small! Don’t wait…install one now!
• A GFCI is a sensitive device that reacts immediately to a small electric current leak by stopping the electricity flow.

Product Overview

USER MAINTENANCE

For proper operating performance and to increase the life span of your dryer, it must be kept clean. It is especially important to keep the inlet filter clean. When cleaning is needed, unplug the cord, allow dryer to cool, and clean dust and lint from air intake openings with a small brush or the brush attachment of a vacuum cleaner. Clean the removable magnetic inlet filter every month. Gently wipe away debris with your fingers or a dry, soft cloth. The outer surface of the dryer should be wiped clean with a cloth only.
Blocked or clogged air intake vents will cause the dryer to overheat. If overheating occurs, an automatic safety device will shut the dryer or the heat off to prevent damage or personal injury. If the unit or the heat turns off, unplug the cord and allow the dryer to cool for 10 to 15 minutes before restarting. Make sure the air vents are clean.

CAUTION

NEVER allow the power-supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the dryer. Damage will occur at the high flex point of entry into the dryer, causing the cord to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or unit stops or operates intermittently. If the cord or dryer is damaged or does not operate properly, return it for repair to an authorized Conair Service Representative only. No repairs should be attempted by the consumer.

STORAGE – Important

When not in use, your dryer should be disconnected, allowed to cool, and stored in a safe, dry location, out of reach of children. Do not wrap line cord around dryer. Allow the cord to hang or lie loose and straight at the point of entry into the dryer.

LIMITED FOUR-YEAR WARRANTY (U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your unit free of charge for 48 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed on back, together with your purchase receipt. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 48 months from the date of manufacture. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 48-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Please register this product at register.conair.com.

SERVICE CENTER

• CONAIR LLC
• Service Department
• 7475 N. Glen Harbor Blvd.
• Glendale, AZ 85307
• ©2024 CONAIR LLC
• For info on any Conair® or InfinitiPRO by Conair® product, call 1-800-3-CONAIR or visit us on the
• web at www.conair.com.

SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:

READ ALL INSTRUCTIONS BEFORE USING

KEEP AWAY FROM WATER
DANGER – Any hair dryer is electrically live even when the switch is off. To reduce the risk of deathor injury by electric shock:

1. ALWAYS UNPLUG DRYER IMMEDIATELY AFTER USING.
2. Do not use while bathing or in the shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquids.
5. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:

1. This appliance should never be left unattended when plugged in.
2. This appliance should not be used by, on, or near children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to a Conair Service Center for examination and repair.
5. This appliance is equipped with a safety thermostat. In the event of overheating, the appliance will either stop automatically or run hot and cold intermittently. Should this happen, slide the switch to the OFF position, unplug, and allow dryer to cool for 10 minutes. Before use again, ensure the rear filter is clear of hair and other debris. Plug in and switch on. If the appliance continues to overheat, discontinue use immediately, unplug, switch off, and contact the Customer Service at 1-800-3-CONAIR.
6. Always ensure that the rear air filter is kept away from hair during use to prevent hair from getting pulled into the fan, which may cause the appliance to overheat.
7. If wearing jewelry when using this appliance, in particular necklaces and/or earrings, take care so that these items do not get caught in the brush head.
8. Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around dryer, even during storage.
9. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
10. Never use while sleeping.
11. Never drop or insert any object into any opening.
12. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
13. Do not use an extension cord to operate dryer.
14. Do not direct hot air toward eyes or other heat-sensitive areas.
15. Attachments may be hot during use. Allow them to cool before handling.
16. Do not place appliance on any surface while it is operating.
17. Do not use with a voltage converter.
18. This appliance is not a toy. Keep away from children.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

This appliance is intended for household use. Use on Alternating Current (60 hertz) only. Standard dryers are designed to operate at 110 to 125 volts AC. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

IMPORTANT

Use of this dryer on the same circuit or fuse with other electrical products or appliances may trip a 15 amp circuit breaker or blow a 15 amp fuse.
NEVER replace the fuse with one rated higher than the capacity of the circuit. Doing so could result in an electrical fire

IMPORTANT SAFETY INSTRUCTIONS

AUTO-MONITORING ALCI SAFETY PLUG WITH LED INDICATOR

IF THE ALCI LED INDICATOR LIGHT IS FLASHING CONTINUOUSLY, THIS INDICATES THAT THE ALCI IS NOT FUNCTIONING PROPERLY. STOP USING AND RETURN APPLIANCE TO AN AUTHORIZED SERVICE CENTER.

CHECK ALCI SAFETY FEATURE EVERY TIME YOU USE THE APPLIANCE.

This appliance is equipped with an auto-monitoring Appliance Leakage Circuit Interrupter (ALCI), a safety feature that provides protection against electric shock under abnormal conditions, such as immersion in water. To ensure that the ALCI is functioning properly, perform the following test.

1. Plug in the appliance with the power off and press the ALCI test button (see diagram).
2. If the ALCI is functioning properly, there will be an audible click, the reset button will pop out, the LED indicator will be off, and the appliance will not turn on.
3. To reset the ALCI, unplug the unit. Then press the reset button and plug the unit back into the outlet. The appliance should work normally when switched on.
4. Be sure to repeat this test each time you use the unit to confirm that the ALCI is operating properly.
5. If the appliance shuts off and the reset button pops up during use, this could indicate a malfunction. Remove the plug from the outlet and allow the appliance to cool. Press the reset button and plug appliance into the outlet. The appliance should function normally. If not, send it to an authorized service center for evaluation.
6. IF THE UNIT HAS BEEN IMMERSED IN WATER, DO NOT ATTEMPT TO RESET AND USE THE APPLIANCE. IT SHOULD BE SENT TO AN AUTHORIZED SERVICE CENTER IMMEDIATELY. FEDERAL COMMUNICATIONS COMMISSION NOTICE

FCC Statement

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

SUPPLIER’S DECLARATION OF CONFORMITY

• Brand: Conair®
• Model No.: 997 & 998
• Description: InfinitiPRO by Conair®
• DigitalAIRE™ Drying Wand
• Responsible Party: Conair LLC,
• 1 Cummings Point Road, Stamford, CT 06902 203-351-9000
• Standards: FCC Part 15 Subpart B, ANSI C63.4-2014

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

DATE OF ISSUE: XX/XX/XXXX

INSTRUCTIONS FOR USE

• Ensure hair is towel-dried and combed through to remove excess water and any tangles. Divide hair into sections to prepare for drying/styling.
• Use the Drying Wand without an attachment to dry the hair. To style, attach preferred brush head onto the handle. To remove and attach attachments, refer to the “Changing the Attachments” section.
• Slide the switch to the ON position and select a temperature and airflow setting suitable for your hair type. Please note: A blue LED light will illuminate below the air outlet to indicate the anti-frizz ionic feature is activated.
• After use, slide the switch to the OFF position to switch off and unplug the appliance.
• Allow the appliance to cool before storing.

CHANGING THE ATTACHMENTS

• With the hooks on the rear of the attachment located at the top, position the attachment over the air outlet. At a slight angle, with the bottom of the attachment touching the appliance, gently push the top of the attachment onto the handle until it clicks into place.
• To remove an attachment, press and hold the release button at the top of the handle and gently pull the attachment away from the handle.

NOTE: Please be careful not to touch the surround of the air outlet, as it will be hot after use.

STYLING GUIDE

Your best looks begin with a good haircut that’s well-maintained. Always care for your hair with superior-quality shampoos, conditioners, and finishing products

DRYING

• Use the Drying Wand without an attachment to dry hair.
• Direct the airflow down the hair shaft to smooth the section as you dry.
• For a lasting style, select the cool setting and gently blow through warm hair to set and smooth.
• Repeat for each section of hair.

STRAIGHTENING BRUSH

• Place the brush head underneath or over a section of hair, close to the scalp with the firm bristles pointing upward.
• Using the brush over the hair section will help to detangle and straighten thinner hair.
• Place the brush underneath the hair section to help straighten thicker hair and add volume.
• Use your other hand to pull the hair section taut against the brush head until the firm bristles penetrate through the hair.
• Gently glide the brush head through the section creating tension and control through the hair to straighten the section as you dry.
• For a lasting style, select the cool setting and brush through warm hair to set and smooth.
• Repeat for each section of hair.

VOLUMIZING BRUSH

• Place the brush head underneath a section of hair, close to the scalp with the flexible bristles pointing upward.
• Use this brush head to lift hair at the roots. Hold for a few seconds to boost volume at the roots as you dry.
• Slowly move the brush head down through each section to dry, adding shape and volume.
• For a lasting style, select the cool setting and brush through warm hair to set and smooth.
• Repeat for each section of hair.

STYLING PICK

• Place the styling pick head underneath or over a section of hair, close to the scalp and pointing upward.
• Use the styling pick head to lift hair at the roots. A natural combing action will fluff the hair.
• Slowly move the styling pick head down through each section to style.
• For a lasting style, select the cool setting and comb through warm hair to set and smooth.
•  Repeat for each section of hair.

AIRFLOW/TEMPERATURE SETTINGS

There are 3 airflow settings and 4 temperature settings, including a cool setting. When initially turning on the Drying Wand, the default airflow and temperature setting will activate—Airflow: I and Temperature: I. Memory Function: When turning on the Drying Wand again, the settings will default to the last settings used before turning wand off. To set the airflow, press the airflow button until the desired airflow speed is reached. A white LED will illuminate to indicate each of the 3 airflow speeds. To set the temperature, press the temperature button until the desired setting is reached. A red LED will illuminate to indicate each of the 3 heat settings. Press the button a fourth time to activate the cool setting — the 3 LED lights will change from red to blue. When choosing a temperature setting to dry and style your hair, start with the lowest setting and increase as needed. If you have delicate, fine, bleached, or colored hair, use the lower heat settings. For thicker hair, use the higher heat setting. Use the cool setting on warm hair to set your style.

ULTRA-CARE

To activate the advanced ultra-care mode, press and hold down the temperature setting button for 1–2 seconds until the temperature LED lights alternate between red and blue to indicate the airflow is cycling between hot and cool. To turn off the ultra-care mode, press the temperature button once to return to your chosen heat setting.

ANTI-FRIZZ TECHNOLOGY

Advanced plasma technology combines positive and negative ions to eliminate frizz and flyaways.

REMOVABLE MAGNETIC FILTER

A clean filter optimizes the dryer’s airflow for fast drying performance, and the removable magnetic filter makes cleaning easy. Clean the filter every month. Gently wipe away any built-up debris with your fingers or a dry, soft cloth

For your safety and enjoyment of this product, always read the instruction booklet carefully before using.

References

• Welcome | Conair
• Conair LLC Consumer Products for Haircare, Beauty, Wellness, Home and Travel

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>