AQUA 112mm Rainwater Systems Instruction Manual
- June 1, 2024
- Aqua
Table of Contents
AQUA 112mm Rainwater Systems
Product Specifications
Rainwater Systems
Rainwater Compatibility Chart:
Manufacturer| 112mm Half Round| Square Line| Deep Flow| Krown Ogee| 150mm
Kommercial
---|---|---|---|---|---
Bret| x| | | x| x
FloPlast| | x| | x|
Freeflow| | x| | x| x
Product Usage Instructions
Compatibility Guidelines:
It is recommended to use components from the same manufacturer to ensure
proper fit and function. Refer to the compatibility chart for guidance.
Installation Steps:
- Begin by measuring the area where the rainwater system will be installed.
- Select the appropriate components based on the desired capacity and flow rate.
- Follow the manufacturer’s instructions for assembling the system.
- Ensure proper alignment and secure installation to prevent leaks.
- Test the system by running water through it to check for any issues.
Maintenance Tips:
Regularly inspect the system for debris or blockages that may affect
performance. Clean gutters and downpipes as needed to prevent clogging.
FAQs (Frequently Asked Questions)
-
Q: Can I mix components from different manufacturers?
A: It is not recommended to mix components from different manufacturers as they may have different tolerances that could lead to compatibility issues. -
Q: How often should I clean the rainwater system?
A: Cleaning frequency depends on environmental factors. It is advisable to inspect and clean the system at least twice a year, especially before the rainy season.
Rainwater Compatibility Chart
Manufacturer| 112mm Half Round| Square Line| Deep
Flow| Krown Ogee| 150mm Kommercial
---|---|---|---|---|---
Bret Martin| ✔| x| ✔| x| x
FloPlast| ✔| ✔| ✔| x| x
Freeflow| ✔| ✔| ✔| x| x
Gerberit Terrain| x| x| x| x| x
Hepworth| ✔| ✔| ✔| x| ✔
Hunter| ✔| ✔| ✔| ✔| x
Marley| ✔| x| ✔| x| ✔
Marshall Tufflex| ✔| ✔| ✔| x| x
Osma (Wavin)| ✔| x| ✔| x| ✔
Polypipe| ✔| ✔| ✔| x| ✔
Gutter flow capacity with outlet at the centre of the gutter run
| System | Guter Level | 1:350 Gradient |
|---|---|---|
| 112mm Half Round | 1.90 Litres/Sec | 2.43 Litres/Sec |
| Square Line | 2.20 Litres/Sec | 3.03 Litres/Sec |
| Deep Flow | 3.80 Litres/Sec | 5.00 Litres/Sec |
| Krown Ogee | 3.77 Litres/Sec | 4.60 Litres/Sec |
| 150mm Kommercial | 4.60 Litres/Sec | 6.467 Litres/Sec |
Gutter flow capacity with outlet at the end of the gutter
| System | Guter Level | 1:350 Gradient |
|---|---|---|
| 112mm Half Round | 0.95 Litres/Sec | 1.21 Litres/Sec |
| Square Line | 1.10 Litres/Sec | 1.55 Litres/Sec |
| Deep Flow | 2.05 Litres/Sec | 2.56 Litres/Sec |
| Krown Ogee | 1.87 Litres/Sec | 2.29 Litres/Sec |
| 150mm Kommercial | 2.30 Litres/Sec | 3.23 Litres/Sec |
Note:
The above is for guidance only for connection to existing fited compatible
systems.
However, we do not recommend that you mix systems as all manufacturers have
slightly different tolerances.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>