TOYS COMPANY Spray Remote Control Car User Manual

TOYS COMPANY Spray Remote Control Car

Product Specifications

• Compliance: FCC Part 15
• RF Exposure: General RF exposure requirement met
• Portable Use: Can be used in portable exposure condition without restriction

FAQ

Frequently Asked Questions

• Q: What should I do if the device is causing interference?
  • A: If the device is causing interference, try reorienting the antenna, increasing separation from other equipment, or consulting a professional for assistance.
• Q: Can I use the device in portable conditions?
  • A: Yes, the device can be used in portable exposure conditions without any restrictions as it meets the necessary RF exposure requirements.

INTRODUCTION

Thank you for using our company toy products. In order to help you better understand this product, please read the following instructions before use. This will give you a different operating experience.
This product is suitable for children ages 6 and above. It should be assembled/charged by adults before children can play with it.

Warning: Do not dismantle or modify this product without authorization, as any alteration may result in the product not functioning properly.

REMOTE CONTROL FUNCTION DESCRIPTION

Regular battery version

Use 5*1.5V “AA” disposable batteries, additional purchase required (Included).

HOW TO INSTALL THE BATTERY

1. Turn the switch on the remote control car and remote control to the “OFF” position.
2. Use a cross screwdriver to open the battery cover.
3. Insert the battery as shown in the picture above.
4. Put on the battery cover.

HOW TO PLAY

HOW TO PLAY WITH A REMOTE CONTROL CAR

1. Turn on the remote control car/remote control switch to complete the frequency matching.
2. Use the joystick and buttons on the remote control to control the car to move forward or backward, rotate left or right, move left or right, and perform a one-key demonstration.
3. When the battery is depleted, the steering becomes unresponsive and the forward and backward movements also become slower. At this time, the battery should be removed and charged

ADDING WATER AND MIST EFFECT

• To fill the car water tank, add an appropriate amount of water using a water dispenser.
• Press the spray button on the remote control, and mist effect will be emitted from the rear of the remote control car.

REMOTE CONTROL CAR DEMONSTRATION

• Move the joystick on the remote control to move the car forward/backward
• Turn on remote control “left / right rotation” joystick to make the remote car rotate 360° to the left/right.
• Press the “Left / Right Forward” button to make the remote control car turn left / right in the forward direction.
• Simultaneously, move the forward / backward joystick and the left/right rotation joystick, and the remote control car will turn left/right front or left/right rear.
• Press the “left / right turn” button to make the remote control car turn left/right.
• Press the “Auto Demo” button to activate the remote control car automatic demonstration feature.

INSTRUCTIONS FOR USE

BATTERY CAUTION:

VEHICLE

1. case the product 5 a kant a core diy use),.
2. Incase the product does not function correctly, first check of the power supply or generally incorrect connection of the battery connector.

TRANSMITTER

1. Rechargeable batteries are not recommended.
2. Alkaline batteries are recommended.
3. Non-rechargeable batteries are not to be recharged
4. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
5. Do not mix old and new batteries.
6. Only batteries of the same or equivalent types as recommended are to be used.
7. Batteries are to be inserted with the correct polarity.
8. The supply terminals are not to be short-circuited.
9. If batteries are loose, bend out the contacts for a tight fit.
10. Exhausted batteries are to be removed from the toy and be disposed of immediately; never dispose of batteries in fire.
11. If storing product for long periods of time, make sure to remove batteries.
12. Check the product periodically for signs of damage to electrical parts; do not play with the product until damage has been properly assessed.

Date code: EXCITE200064280

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

FCC STATEMENT

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

If you cannot eliminate the interference, the FCC requires that you stop using your equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: W89-SMARTKID-49R

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

MORE INFORMATION

APPLE TOYS DEVELOPMENT CO., LTD.

• Manufactured in Shantou China by Apple Toys Development Co., Ltd.
• RM916,Houston Centre, 63 Mody Road, Tsimshatsui East, Kowloon, Hong Kong

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>