okayo DST-CON Digital Stationary Transmitter User Manual

: August 5, 2024
: Okayo

Table of Contents

okayo DST-CON Digital Stationary Transmitter
Specifications
Product Information
Product Usage Instructions
FAQs
Manufacturer’s Declaration
Product Overview
Display Overview
Setting screen
Connecting Instruction
Operating instruction
Compatible receiver CON-9R
Applications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

okayo DST-CON Digital Stationary Transmitter

Specifications

Model: [Insert Model Number]
Dimensions: [Insert Dimensions]
Weight: [Insert Weight]
Power Supply: [Insert Power Requirements]
Interface: [Insert Interface Type]

Product Information

The [Product Name] is a versatile equipment designed to [Brief Description of Product]. It is built with high-quality materials to ensure durability and reliability in various applications. The [Product Name] offers [Key Features/Benefits].

Product Usage Instructions

Setup:

Follow these steps to set up the [Product Name]:

Step 1: Unpack the product and check for any visible damages.
Step 2: Connect the power supply according to the provided specifications.
Step 3: Attach any necessary peripherals or cables as required.
Step 4: Power on the equipment and follow the on-screen instructions for initial setup.

Operation

To operate the [Product Name], follow these guidelines:

Guideline 1: Use the control panel/buttons to navigate through different settings.
Guideline 2: Refer to the user manual for detailed instructions on specific functions.
Guideline 3: Ensure proper ventilation around the equipment for optimal performance.
Guideline 4: Regularly clean the equipment as per maintenance instructions.

Troubleshooting:

If you encounter any issues while using the [Product Name], refer to the troubleshooting section of the user manual. Contact customer support if problems persist.

FAQs

Q: What should I do if the equipment malfunctions?

A: If the equipment malfunctions, first refer to the troubleshooting section of the user manual. If the issue persists, contact customer support for assistance.

Q: Can I use non-shielded interface cables with the equipment?

A: No, to maintain compliance and ensure proper operation, only use shielded interface cables when connecting the equipment to computers or peripheral devices.

Manufacturer’s Declaration

This product meets the following standards:

Federal Communications Commission Interference Statement

Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC INFORMATION
The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure require-ments and void user’s authority to operate the device.

Europe – EU Declaration of Conformity
This device complies with Directive 2014/53/EU issued by the Commission of the European Community.

WEEE Statement
Electrical and electronic equipment must be disposed of at the end of their lifespan separately from household waste.
Please dispose of this equipment at your local waste collection or recycling center. Please help to protect our environment.

Safety and Electromagnetic Emissions Certificates
Standard Compliance

RoHs compliant
European Directive 2011/65/EU

Certificates

СЕ
FCC
NCC

FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example – use only shielded interface cables when connecting to computer or peripheral devices).

FCC Radiation Exposure Statement miraqui with comie distance of za cetimeters be min the fari for and your holled environment. This equipment should be installed and

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.

Product Overview

Front panel

Power button
3.5 mm headphone / headset-mic socket
Backlit Bluetooth button
Headphone volume control
Backlit Mic (Transmitter) / Feed (Interpreter 0/1) button
Mic level control
OLED Display
Menu / Set jog dial
Backlit Aux (Transmitter) / Feed Thru (Interpreter O/I) button
Aux-in level (volume) control Rear panel
Rod antenna (TNC connector)
Bluetooth sensor
6.3 mm loop output
6.3 mm loop input
RCA mix output
RCA aux input
Combo input
Line / Mic / Phantom switch
Uploading port (available for limited models)
DC jack
Cable grip

Display Overview

Standby screen

A Mode
- Transmitter (default)
  Interpreter O (to work with okayo’s 10-way Language Router LR-10)
  Interpreter|
B RF power
- Hi
- Mid
- Low (default)
C Audio level
This fluctuates upon audio signals.
D Aux-in level
- Lo (default): this setting is recommended if the transmitter will be connected with audio source, such as mp3, whose level is lower.
- Hi: this setting is recommended if the transmitter will be connected with professional mixer or other audio source whose level is higher.
E Channel lock
Channel will be locked automatically when the transmitter is on.
F Sound quality
- HQ
- Q (default)
G Channel number
• Total channel quantity varies upon product and default channel number is 01.

Setting screen

To enter the setting menu, press and keep pressing the jog dial 8 when turning the transmitter on 1.
Turn the jog dial 8 clockwise to select preferred setting and then press the jog dial 8) again to confirm new selection and return to setting menu.
To exit the setting menu, select “Save and Exit” and press the jog dial 8 again.

Connecting Instruction

Operating instruction

(Mode: Transmitter)

Turn the transmitter on
Press the power button (1) for 1 second to turn the transmitter on.
Unlock the channel
Channel will automatically be locked when the transmitter is on. Press and keep pressing the jog dial (8 until symbol “ ” disappears. Then, turn the jog dial clockwise to select preferred channel number which will be locked when the jog dial is pressed again.
Check channel frequency
Short press the jog dial & when the transmitter is at standby screen to check the frequency of
selected channel.
Monitor audio via headphone
Connect 3.5mm headphone or headset mic and tune the volume control 4 at appropriate position
to monitor audio on the transmitter. Note all audio signals except mic-in 21* can be monitored.
Listening at high volume for long periods may damage your hearing.
Activate mic/aux function
Press the mic/aux button 5, and 9 to activate or deactivate the function. Tune the mic/aux level via the
control 6/10 at appropriate position. Note when headset mic is in use, make sure mic volume (6) is
appropriately adjusted in addition to aux volume 10
Turn the transmitter off
Press the power button 1 for 2 seconds to turn the transmitter off.

Advanced operation (Mode: Interpreter 0/1)
In addition to standard mode (Transmitter), two additional modes (Interpreter O and Interpreter l) are also available for interpretation market.

Interpreter O (automatically)
Connect it with okayo’s 10-way language router LR-10 (see LR-10 manual separately) when this mode is selected. Both Feed and Feed Thru button will automatically be activated upon the operation on language router LR-10.

Interpreter I (manually)
If only 1- or 2- language interpretation is required, Feed and Feed Thru button can manually be adjusted at this mode.