TUGA SEM200 Wireless In Ear Monitor System Instruction Manual

TUGA SEM200 Wireless In-Ear Monitor System

Product Introduction

1. This device is a wireless in-ear monitor system used in stage performances and audio broadcasting. It can replace traditional complex audio monitor­ing devices and achieve excellent monitoring effects.
2. The device can have the best anti-interference and stability, with the latest high-frequency transmission and audio signal dynamic processing tech­nology. The device improves the signal-to-noise ratio and dynamic range, s that it can show the perfect reproduction of the original sound.

Important Safety Tips

1. The Device should be kept dry. Do not put the device in places with high temperature, humidity, and liquid, in case it causes a failure.
2. To avoid the risk of fire or electric shock, do not open the enclosure privately.
3. If in lightning weather or the device is not been used for a long g time, Unplug the power adapter plug.

Catalogue

• Main Function And Features …………………………………………………….. 2
• Receiver Introduction ………………………………………………………………. 2
• Transmitter Introduction …………………………………………………………. 3
• Illustration Of Usage Instruction ……………………………………………… 4
• System Settings ………………………………………………………………………. 5
• Technical Parameter ……………………………………………………………….. 7

Main Function And Features

• Choose to set the Mono function or Stereo function
• The volume of the left and right channels can be adjusted independently
• Use the LCD screen, can show the settings conveniently
• Use USB socket, can transfer data and extend function conveniently
• Adopt a dynamic expansion circuit, improve the signal-to-noise ratio greatly
• Adopt metal enclosure, protect internal circuits and components effectively
• The transmitter adopts a balanced and unbalanced public input socket and an output monitoring earphone socket
• Connect by bluetooth, indicated with bluetooth indicator light

Receiver Introduction

1. Display screen
2. Up selection button
3. Function setting button
4. Down selection button
5. Charging connector
6. Antenna
7. Power switch
8. Earphone monitoring socket

Transmitter Introduction

1. Select the button upward
   • Function settings
   • Select the button downward
2. LCD
3. Infrared pairing window
4. Volume adjustment knob
5. Headphone monitoring socket
6. Decrease volume/Previous button
7. Play/pause button
8. Volume plus/Next button
9. Bluetooth indicator
10. Power switch
11. Antenna
12. The right channel volume knob
13. Right channel input connector
14. Left channel input connector
15. Left channel volume knob
16. 3.5mm connector
17. 6.35mm output connector
18. Power socket
19. USB socket

Illustration Of Usage Instructions

System Settings

Transmitter

1. Power on/off: keep pressing POWER for 3s.
2. Channel selection: press SET once, the “CHANNEL” light will flash, then press UP or DOWN to select the corresponding channel.
3. Quit setting: stop pressing any button for 5s during the process of setting to quit the setting mode.
4. Bluetooth and USD Input control: press and hold the 1 key for 2 seconds to adjust the input volume; Press the short key to switch the input songs.

Receiver

1. Power on/off: keep pressing the button for 3s.
2. Channel selection: The transmitter flashes the red light of the  IR window, and the IR window of the receiver is to complete the frequency of the trans­mitter IR window.
3. Volume adjustment: press  again, the “ ” light will flash, then press the or CB key again to select a suitable volume.
4. Mode switching: press again, “STEREO” or “MONO” light will flash, press or  to switch.
5. Quit setting: stop press any button for 5s during the process of setting to quit the setting mode.
6. Lock screen: stop pressing any button for 10 seconds during normal opera­tion, the screen will turn off automatically.
7. Frequency indication: when the receiver’s group and channel are consistent with the transmitter, the receiver indicator is always on, if not, the indicator is not bright.

Technical Parameters

Transmitter

• Frequency band :550.0MHz-599.75MHz Transmit board operating current

• Transmit power:

  • ≤13dBm

• Transmit modulation:

  • Digital modulation

• Front panel output:
  

  • 6.35 2-channel socket stereo headphone output level: Maximum llOO土lOOmV

• Rear panel output:

  • 6.35 mono socket mixed output level: Max 1150土lOOmV

Audio input

1. CDXLR and 6.35 composite socket input XLR balanced input: maximum 900MV / 6.35 single-ended input: maximum 1800mV
2. 03.5 headphone jack input: Maximum 900mv
3. Input power: DC12V/500mA

Receiver

• Receiver board operating current:
  • 130士lOmA
• Lithium battery low voltage check voltage:
  • 3.4V Lithium battery automatic shutdown
• Voltage:
  • 3.2V
• Headphone output level:
  • Maximum 110mV
• Receive Sensitivity:
  • ≤10odBm
• Receiver left and right stereo separation:
  • ≤65dB
• Charging time:
  • 2.5h
• Using time:
  • 6h

The transmitter and receiver frequency modulation and frequency binding method: the transmitter is frequency modulated by pressing the button and then infrared frequency binding with the receiver.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>