SPERAS EST-2 USB-C Rechargeable Tactical Flashlight User Manual

: July 17, 2024
: SPERAS

Table of Contents

EST 2
- User manual
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EST 2

User manual

Danger and Warning

Please read the user manual before first use
DO NOT shine light directly into eyes. This may cause temporary blindness and/or cause permanent damage to the eyes.
DO NOT cover the light head when the flashlight is on or place the light head on the ground. The heat dispersion of the light may cause damage to the flashlight itself or even result in burning other objects.
Keep out of reach of children.
DO NOT activate the high mode constantly to prevent the flashlight body from overheating and hurting the user’s hand.
Please insert SPERAS batteries or SPERAS recommended batteries.

Inside the box

| |
---|---|---
1SPERAS EST 2| 1USB-C charging cable|

1*18650 3100mah Lithium Battery

| |
1Lanyard | 2Extra O-rings|

1*User manual

Specification

FL 1 STANDARD

| Turbo| High| Medium| Low| ECO| Strobe| SOS
---|---|---|---|---|---|---|---
| Output| 1900LM| 800LM| 400LM| 100LM| 10LM| 1900LM|

400LM

| Runtime| 4H| 4.5H| 5H 15min| 22H 30min| 157H| –| –
| Beam Intensity| 11,175cd| 5,000cd| 2,500cd| 750cd| 100cd| –|

–

| Beam Distance| 211m| 141m| 100m| 55m| 20m| –| –
| LED|

Luminus SST40*1

| Lens| TIR Lens
| Battery Source|

1 18650 Lithium battery or 2CR123A

| Charging Time| About 4hrs(Type-C charging)
| Impact Distance|

1.5m

| Waterproof| IP68
| Material|

Aerospace 6061 Aluminum Alloy

| Dimension| 115(Length) 25.4(Head)25.4(Tube)mm
| Net Weight|

78g(Battery excluded)

Note: The above data has been measured in accordance with international flashlight testing standards ANSI/NEMA FL1 using SPERAS 3.7V/ 3100mAh 18650 battery under laboratory conditions.

Product Overview

SPERAS EST 2 is another version flashlight of EST which has the same lumen output 1900lm and a max beam distance of 211m. However, EST 2 has a more compact size and a different user interface. EST 2 can be easy to enter the ECO mode and turbo mode. The simple but powerful EST 2 aims to be an ideal flashlight for security guards, police, and general users.

Battery Installation

Before the first use, please remove the insulating film of battery from the tail cap.
And if the battery needs to be changed, make sure the positive polarity side of the battery faces toward the direction of the flashlight head (the side of the LED).

Insulating film
Remove the insulating film
Unscrew

Operating Instructions

ON/OFF/Tail Strobe

Can only be turned ON/OFF by the tail button.
Slightly press the tail button, momentary on (memory mode); release, turn OFF.
Press down the tail button, turn ON (memory mode); press down again, turn OFF.
At the OFF state, quickly light press twice, momentary Strobe; release, turn OFF.
At the OFF state, quickly press and press down, Strobe; press down, tun OFF.

Change mode

At the ON state, click the side button to change modes. The mode will circle from Low, Med, High to Turbo.

Strobe/SOS

At the ON state, double click the side button to enter the Strobe mode, double click again to enter SOS; one click to return the state before strobe.

ECO mode

Keep pressing the side button and then press down the tail button, the flashlight will enter the ECO mode.

Turbo mode

At the ON state, long press the side button for 0.5 seconds, it will enter the Turbo mode; it will back to the previous mode when release.

Charging

EST 2 Support Type-C 5V/1A
It takes about 4hr to be fully-charged
Red: Busy charging
Green: Charging is complete
Orange: Check that the battery is correctly seated or faulty battery

*Note: Only can charge rechargeable 18650 lithium battery. EST 2 can not work when charging.

Power Indicator

When turning the flashlight on the built-in indicator on the side switch will indicate the remaining power level for 5 seconds. Power indicator will display one of the following:
Green: 100%-70%
Orange: 70%-30%
Red: 30%-5%
Red Flash: 5%-1%, (Alert flash to indicate very low power level).

Usage and Maintenance

Please fully charge the battery before initial use.
To maintain the waterproof rating, please lubricate the Oring with silicone safe lubricant and replace broken O-rings as soon as possible.
If the light will not be used for a long period or when transported, please unscrew the tail cap and remove the battery to break the circuit.

Warranty

30 days free replacement: We will repair or replace a light within 30 days of purchase if it is afflicted with a manufacturing defect. If the problem calls for a replacement, we will replace the light with the same model as the one sent in. If the model has been discontinued, customers will receive a product with similar or improved performance.
5 years warranty: We offer free repair within 5 years of purchase if problems develop with normal use.
Limited lifetime warranty: If problems develop after 5 years of the purchase, we will charge for parts. The total repair fee is assessed according to the cost of the replaced materials.
Contact Your Dealer First: You may provide your SPERAS Warranty Card, purchase invoice, receipt or other evidence from the sellers when you purchasing our lights and contact your dealers directly for warranty service, and SPERAS will provide dealers with service support;

Beyond Warranty

Free warranty DOES NOT cover any damage or failure caused by:
Normal wear up
Damages caused by disassembling, modifying the flashlight
Damages caused by rough operation or misuse
Improper maintenance or repairs by anyone other than an authorized retailer or SPERAS Itself

Shenzhen Speras Lighting Co., Ltd
Add: 4F, Building G, Gangshen Innovation Park,
Huaning Road, Dalang Street, Longhua District,
Shenzhen, China. China. 518109
Tel.: +86-755-2107 2597
Email: info@speraslight.com
Website: www.sperasflashlight.com

Warranty Card

Product Model No.: __
Series No.: __
Date of Purchase: __
Signature/Dealer Stamp: __

Thank you for choosing SPERAS.
The SPERAS flashlight is covered by a 5-year warranty from the date of purchase.
Please ask the seller/dealer to fulfill the date of purchase and sign/stamp the warranty card after purchase!
Contact the seller/dealer of SPERAS flashlight first if help needed!

Notice: The warranty covers manufacturer defects solely and becomes invalid if the flashlight is subjected to work by an unauthorized party.