MONTE CARLO monte GT Installation Guide
- June 11, 2024
- MONTE CARLO
Table of Contents
CARLO monte GT
Installation Guide
monte GT
CONTACT US
Web montetuning.com
Email support@montetuning.com
IMPORTANT INFORMATION
DO NOT OPERATE THE DEVICE WHILE DRIVING
Do not exceed legal speed limit. Come to a complete to stop to change the
settings on your device.
CHECK YOUR VEHICLE HEALTH PRIOR TO INSTALLATION
Make sure that all systems in your car are in good condition before
installation. The prexisting issues could affect the performance of the Monte
GT.
WARRANTY, RETURN, REPLACEMENT
Your Monte GT has a lifetime warranty for all manufacturing defects and
dedicated online assistant available 7 days a week. Find out more information
on page
WHAT’S IN THE BOX?
Monte GT ……….. 1
OBD 2 cable …………….2
Magnet mount …………….3
Installation manual …………….4
Aluminum car badge …………….5
UNDERSTANDING YOUR MONTE GT Built in metal disc…………….. 1
USB port………………. 2
Reset button cutout……………… 3
LED cutout………………………. 4
- USB port is used only by the product manufacturer to program and test your device
- Reset button. Please use thin object to press the reset button
Steady red| It means that the Monte GT Is connected to the OBD2 and not
programmed In this case the chip Is not reading the data from the ECU
---|---
Steady green LED| You are in the process of calibration (may take 1-3 minutes)
Flashes green| It is in working mode and reading data from the ECU
Flashes red| (1 blink every 5 seconds) The GT entered a sleep mode
Blinks blue| Bluetooth data exchange Is taking place
INSTALLATION CONNECTING TO YOUR CAR
NSTALLATION PROGRAMMING
https://montetuning.com/gtapps
FAQ
WILL IT VOID MY WARRANTY?
– No, the tuning method we use ensures the original ECU software is unchanged and you can always reverse the tuning at your convenience.
DOI NEED TO KEEP THE APP RUNNING ALL THE TIME?
– No you don’t need to keep the app running. After the Mode is selected you can close the app.
WHAT IS THE 120 MILES ADJUSTMENT PERIOD?
– The adjustment of 120 miles is necessary to make sure the tune is applied safely and chip has collected enough data to create a perfectly balanced tune. You may not feel the performance improvements if the adjustment is not complete.
DOES IT HAVE TO STAYED PLUGGED IN ALL THE TIME?
– Yes since the GT alters the temporary memory (RAM) and not changing the permanent memory (ROM) the device must be plugged in all the time. Once unplugged the car will go back to factory stock settings.
DO! NEED TO DRIVE 120 MILES EVERY TIME | SWITCH THE MODE?
– Yes. Each mode Is a separate tuning setting that requires an adjustment. It is impossible to use only one tuning setting and turn it up and down like a volume control for more power or less power. This is why we need 6 separate tuning settings. They all require a separate adjustment cycle to be fully applied.
USEFUL LINKS SCAN WITH YOUR PHONE
| DOWNLOAD THE APP | FAQ | CONTACT US FORM |
|---|---|---|
| https://montetuning.com/gtapps | https://rschipperformance.com |
THANK YOU FOR YOUR PURCHASE. YOUR OPINION IS VERY IMPORTANT TO US.
We strive for perfection in all fields. If there is any reason you feel we
haven’t provided great service, please contact us at support@montetuning.com
so we can do whatever it takes for 100% customer satisfaction! Important:
lf you are Unsatisfied with our products, please contact us for a full refund
before leaving negative feedback.
You will receive a response within next 12 hours. Thank you for your patience
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may Cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, If not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
THANK YOU!
WE STRIVE TO PROVIDE THE BEST CUSTOMER SERVICE AND EXPERIENCE. YOUR MONTE GT
COMES WITH LIFETIME WARRANTY AND SUBSCRIPTION TO OUR TECH ONLINE ASSISTANT
AVAILABLE TO YOU EVERY DAY VIA WHAT’S APP OR EMAIL.
YOU HAVE A PRODUCT, INSTALLATION OR OTHER QUESTION? CONTACT US NOW AND GET
HELPED.
EMAIL
EMAIL US support@montetuning.com Everyday
24/7
CAII US +1 501-204-0005 mon – frd 9 am
– 4 pm cst
WHAT’S APP
Scan to chat via WhatsApp 24/7 or use this number +1
501-204-0005
https://wa.me/message/VTMNMLJRPG4WB1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>