LIVARNO IAN 461195 Floating Water Lounger Instruction Manual

: August 3, 2024
: LIVARNO

Table of Contents

LIVARNO IAN 461195 Floating Water Lounger
Floating Water Lounger
Description of parts
Technical data
Operation
Disposal
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LIVARNO IAN 461195 Floating Water Lounger

LIVARNO-IAN-461195-Floating-Water-Lounger-PRODUCT

List of pictograms used

Safety information
Instructions for use

Floating Water Lounger

Introduction
We congratulate you on the purchase of your new product. You have chosen a high-quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it. DEFIANCE AND VIOLATION OF THIS MANUAL CAN RESULT IN HAZARDS, SUCH AS PERSONAL INJURY AND DEATH, E.G. DROWNING!

Intended use

This product is not suitable for children under 14 years of age. Any use other than previously mentioned or any product modification is prohibited and can lead to injuries and/or product damage. The manu-facturer is not liable for any damages caused by any use other than for the intended purpose. The product is not intended for commercial use. This product is not a swimming aid, a water toy, or a winter sports article and is only suitable for swimmers!

Attention! The user surface is the side with the valves and symbols.

Description of parts

LIVARNO-IAN-461195-Floating-Water-Lounger-FIG-1

Floating Water Lounger (HG10982A/ HG10982B/ HG10982C)
Valve
Repair patch

Technical data

Dimensions (inflated ): approx. 120 x 72 x 17 cm (L x W x H)
Weight: approx. 0.225 kg
Max. No. of persons: 1 person
Max. load : 100 kg
Rated pressure: 0.43 psi (0.03 bar)
Material: PVC

Scope of delivery

1 Floating Water Lounger (HG10982A/ HG10982B/ HG10982C)
1 Repair patch
1 Instructions for use

Safety advice
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

WARNING
RISK OF FATAL INJURY AND RISK OF ACCIDENTS FOR INFANTS AND CHILDREN! Never leave children unattended with the packaging material or the product. There is a risk of suffocation from the packaging materials and a risk of fatal injury by strangulation. Children often underestimate dangers.

WARNING
DANGER TO LIFE THROUGH DROWNING! There is a danger of drowning. Use swimming aids if necessary. Never stay in the water alone. Make sure that at least one competent person is present. For swimmers only!

DANGER TO LIFE! The product is not suitable for use as a floatation aid! A person who slips off the product could drown in a very short time, even though the water may be shallow enough to stand up in.
DANGER TO LIFE! Never use this product in deep areas of water. Use it exclusively in shallow areas of water. An area of water can be considered as shallow if the user of the product can sit on the bottom of the area of water and hold his or her head clearly above the water’s surface (see warnings on the product).
CAUTION! RISK OF INJURY! Make sure that all parts are undamaged. Damaged parts could adversely affect safety and function. Use the device only for its intended purpose.
Make sure that you do not pump too much air into the product. Otherwise, the product may burst.
The product may only be used by persons who are familiar with the safety information.
Please take note of the maximum highest load.
Exceeding the weight limit can lead to injury and product damage as well as influence the product’s functions negatively.
Do not use the product if visual damages can be seen or are suspected.
Do not use the product if air is escaping.
CAUTION! RISK OF POISONING AND RISK OF DAMAGE TO PROPERTY! Do not light any fires near the product and keep it away from sources of heat.
Do not use the product on hard or stony ground. Otherwise, this may result in damage to the product.
Keep the product away from pointed objects. Otherwise, damage to the product may result.
CAUTION! The air chambers may be pressed under the water’s surface when getting onto it. This – as well as uneven loading of the product – could cause it to tip over.
Keep the repair patch 3 out of the reach of children. items. This can lead to discoloration on your body, your clothing, or other objects that come into contact with the product.
Check the product for damage or wear before each use. The product may be used only when in good working order and condition!

Pictograms

WARNING
Take note of the information contained in the pictograms applied to the product before you use it. Failure to observe this advice could result in injury and/or damage. LIVARNO-IAN-461195-Floating-Water-Lounger-
FIG-5

Operation

Note: Before using the product for the first time, an adult should check it carefully for holes, porous places, and/or seams that are not airtight.
Recommendation: Blow up the product and leave it alone for one day. Air new products in the open air for a few days.

Letting in air

CAUTION! Inflatable plastic products react sensitively to the cold and hot. That is why you should never use the product when the ambient temperature falls to below 15 ° C and rises above 40 ° C. Otherwise this may result in damage to the product.
Note: The product should only be inflated by an adult. Do not overinflate the product. On no account should you use a compressor. Stop the process when resistance increases during pumping and the seams start to stretch. Otherwise, the material might tear. Only use manual pumps and/or pumps specifically designed for use with inflatable plastic products.
IMPORTANT! Keep in mind that air temperature and weather conditions can affect the air pressure inside inflatable products. In cold weather, the prod-uct behaves as if it has less air pressure in it because the air inside contracts. Under these conditions, you may have to add air. In hot weather the air inside expands. Under these conditions, you may have to remove air to avoid overfilling.
Roll the product out first and then check for holes, tears, and other damage.
Open the valves 2. Inflate all the air chambers until the item is taut enough. Close the valve caps and press the valveown by applying light pressure for each chamber (see fig. A).
Make sure that the chambers are equally filled with air one after the other.

Letting air out

Pull the valve 2 out and press the valve stems lightly so that the air can escape.

Note: Make sure that the product is completely dry before folding it together. This will prevent the formation of mold, bad odors, and discoloration.

Maintenance
The product must be checked for damage before each use.

Cleaning and care
Use a slightly damp, lint-free cloth to clean the product. On no account should you use corrosive or scouring detergents.

Storage instruction
Make sure that the product is completely dry both inside and out when wishing to store it for any length of time. Otherwise, mildew and mold may form. Store the product in a dark, dry place – out of reach of children.

Note: The ideal storage temperature is 10‒20 °C.

Ensure that the product does not come into contact with sharp objects during storage.

Repairing the product

Note: Minor damage can be repaired by the owner using the supplied repair patch 3. Has any major damage been carried out at a specialist repair shop?

First, let all the air escape from the product (see section “Letting air out”).
Cut the repair patch 3 to suit the size of the hole.
Note: Ensure that the repair patch 3 is larger than the hole and overlaps the edges of the hole.
Round off the sides of the repair patch 3 and pull off the protective foil (see fig. B).
Place the repair patch 3 on the hole and press it down firmly. If necessary, place a heavy object on the repair patch 3.
Wait for 24 hours before you pump up the product again.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. Contact your local refuse disposal authority for more details on how to dispose of your worn-out product. The products incl. accessories and packaging materials are recyclable and are subject to extended producer responsibility. Dispose of them separately, following the illustrated Info-tri (sorting information), for better waste treatment. The Triman logo is valid in France only.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects, you have legal rights against the retailer of this prod-uct. Your legal rights are not limited in any way by our warranty detailed below. The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase. Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product. Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts. This warranty becomes void if the product has been damaged, used, or maintained improperly. The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.

Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions: Please have the till receipt and the item number (IAN 461195_2307) available as proof of purchase. You will find the item number on the rating plate, an engraving on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product. If functional or other defects occur, please contact the service department listed either by telephone or by e-mail. You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

Service Great Britain