LIVARNO Garden Storage Bench Instruction Manual

June 4, 2024
LIVARNO

LIVARNO Garden Storage Bench

PARTS

LIVARNO-Garden-Storage-Bench-FIG1 LIVARNO-
Garden-Storage-Bench-FIG2

INSTALLATION

LIVARNO-Garden-Storage-Bench-FIG3 LIVARNO-
Garden-Storage-Bench-FIG4 LIVARNO-Garden-Storage-Bench-
FIG5 LIVARNO-Garden-Storage-Bench-FIG6 LIVARNO-
Garden-Storage-Bench-FIG7 LIVARNO-Garden-Storage-Bench-
FIG8 LIVARNO-Garden-Storage-Bench-FIG9 LIVARNO-
Garden-Storage-Bench-FIG10

This symbol reminds you the packaging is environmentally friendly to dispose Recyclable material: paper FSC® MIX – means that product out FSC® wood and wood out of controlled Sources or recycling was produced.

Introduction

Congratulations on the purchase of the new garden bench, because you have chosen the highest quality product. The user manual and assembly instructions are a part of this product. Before assembly, please read this manual in its entirety and follow its instructions. These instructions contain important information on how to assemble and maintain the product. For this reason, you should keep the manual in good condition and pass it on to possible new owners.

Intended use

The garden bench is intended for sitting, for storing objects immune to humidity and for a periodical storing of textiles (e.g. garden chair cushions). However, the garden bench is not intended for a permanent storing of textiles if it is in the open. The garden bench is intended for personal use only, not for commercial use.

Technical data

  • Capacity: ca. 280 litres
  • Dimensions: ca. 130 x 60 x 85 cm (W x D x H)

Scope of supply

  • P1 base…………………………………………………….. x1
  • P2 cover……………………………………………………. x1
  • P3 (R) right side …………………………………………….. x1
  • P4 (L) left side ……………………………………………….. x1
  • P5 back …………………………………………………… x1
  • P6 front ……………………………………………………. x1
  • P7 strengthening concentration …………………. x1 (P7 = 7A cover + 7B metal profile)
  • P8 element connecting the back wall with the back ………………………………………. x1
  • P9 back wall ……………………………………………. x1
  • P10 (R) right side extension ……………………………… x1
  • P11 (L) left side extension ………………………………… x1
  • P12 (R) right armrest ………………………………………… x1
  • P13 (L) left armrest ………………………………………….. x1
  • P14 A kickstand A …………………………………………. x2
  • P14 B kickstand B ………………………………………….. x2
  • P15 anchoring wedge ………………………………… x4
  • P16 screw ………………………………………………….. x3

Safety instructions

CAUTION! READ CAREFULLY AND KEEP FOR LATER USE!
The following safety rules must be followed. The manufacturer is not liable for the damage inflicted as a result of failure to follow the safety rules. The garden bench is intended for a maximum of two persons, each of whom may weigh a maximum of 110 kg. Do not use the bench as a climbing step or as a place for putting heavy objects. Otherwise there is a danger of injury and/or damage to the product.

Assembly

  • Assemble the bench in accordance with the illustration of assembly steps A-M.
  • Caution! Omitting the order of assembly and the notes in the manual will prevent the product from being assembled. The product needs to be assembled in room temperature.

Maintenance

Do not use any harsh cleaning agents, as this may damage the surface and the product. Clean with a damp cloth with a mild soap solution.

Service

Jelenia Plast Sp. z o.o.
ul. Spółdzielcza 47, PL 58-500 Jelenia Góra
info@jeleniaplast.com
Imported for GB market by:
Lidl Great Britain Ltd, Lidl House,
14 Kingston Road, Surbiton, KT5 9NU

Before contacting the service department, please prepare a receipt as a proof of purchase and product number.

Disposal
The packaging is made of environmentally friendly material which can be disposed of at the local recycling centre. For information on how to dispose of a worn-out bench, please contact the Municipality Office or Town Hall.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals