BUMi PSG 5 Plus Universal Punching and Cutting Instruction Manual
- August 2, 2024
- BUMi
Table of Contents
BUMi PSG 5 Plus Universal Punching and Cutting
Product Information
Specifications
- Item Code: 109.05.001
- Item Name: Profile Rail Cutting Device – PSG 5+ with Punch 12 x 6.4 mm
- Includes: Length and sideways hole punches 12 x 6.4 mm, measuring device 1 m, guide arrangement
- MoQ: 1 Set
Product Usage Instructions
Overview
The Profile Rail Cutting Device PSG 5+ is designed for cutting and punching profile rails with precision and efficiency.
Setup
- Ensure the device is placed on a stable surface.
- Adjust the guide arrangement according to the desired cutting length.
- Secure the profile rail in place using the clamps provided.
Cutting Process
- Select the appropriate punch size based on your requirements.
- Align the punch with the desired cutting point on the profile rail.
- Activate the cutting mechanism as per the device’s instructions.
- Repeat the process for additional cuts if needed.
Maintenance
After each use, ensure to clean the cutting device and store it in a dry place to prevent corrosion.
FAQ
Q: What is the difference between Item Code 109.05.001 and Item Code 109.05.002?
A: Item Code 109.05.001 includes punches of size 12 x 6.4 mm with length and sideways hole punches, while Item Code 109.05.002 includes round punches of size 5.5 or 6.0 mm.
Q: Can the Profile Rail Cutting Device PSG 5+ be used for different profile rail sizes?
A: Yes, the device is versatile and can accommodate various profile rail sizes by adjusting the guide arrangement and punch sizes accordingly.
Advantageous
- For DIN carrier rails, for hand lever operation for cutting pieces to length and punching holes lengthways and crossways in the carrier rails depicted
- With a reinforced eccentric located directly above the shearing blade
- Little force required due to better force transfer
- Burr-free cutting without waste
- No maintenance needed
- Anodised, laser engraved length stop 1.000 mm long with rail support element for accurate angled cutting, with millimeter and inch scales
- Shear blade can be re-sharpened, punches can be exchanged
Standard Version
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>