PHILIPS 7T8-MAS Master Class Instant Fit Owner’s Manual

PHILIPS 7T8-MAS Master Class Instant Fit

Specifications

Product Usage Instructions

Installation

1. Ensure the power source is switched off before installing the MasterClass InstantFit T8.
2. Remove the existing fluorescent tube carefully by twisting and pulling it out of the fixture.
3. Insert the MasterClass InstantFit T8 into the fixture and twist to secure it in place.
4. Turn on the power and test the light to ensure proper installation.

Maintenance
It is recommended to clean the fixture and the MasterClass InstantFit T8 regularly to maintain optimal performance. Do not use abrasive cleaners that may damage the product.

Dimming (if applicable)
If your MasterClass InstantFit T8 is dimmable, ensure to use compatible dimmer switches to adjust the brightness according to your preference.

Frequently Asked Questions (FAQ)

• Can the MasterClass InstantFit T8 be used in outdoor fixtures?
  No, this product is designed for indoor use only and should not be exposed to outdoor elements.

• How do I dispose of the MasterClass InstantFit T8 safely?
  Please refer to local regulations for proper disposal methods. Avoid disposing of this product in regular household waste.

INTRODUCTION

The MasterClass InstantFit T8 lamps provide hassle-free installation with simple lamp-for-lamp replacements. They deliver what we promise, with at least 40%energy savings, flicker-free performance, and the life you would expect. Other lamps claim compatibility but only MasterClass InstantFit (UL Type A) has been proven to work with over 200 ballasts and drivers, delivering even light output, with proven energy savings and a long average lifetime. End users will be delighted being under these comfortable and high quality lamps with no visible flicker and optimized optics. Energy managers will enjoy these lamps too as they can count the savings delivered by our lamps. To enjoy more energy savings, the MasterClass InstantFit lamps can be paired with the Advance TLED drivers to create a Type C system. With available 70,000 hour life, 7-year limited warranty and a shatter-prevention polycarbonate lens, Philips MasterClass InstantFit TLED lamps deliver benefits for all.

Product data

• General Information
  • Cap-Base G13 [Medium Bi-Pin Fluorescent]
  • Nominal lifetime 70,000 hour(s)
  • Switching Cycle 50,000
  • Lighting Technology LED
  • EU RoHS compliant Yes
• Light Technical
  • Color Code 835 [CCT of 3500K]
  • Beam Angle (Nom) 180 degree(s)
  • Luminous Flux 1,150 lm
  • Color Designation White (WH)
  • Correlated Color Temperature (Nom) 3500 K
  • Luminous Efficacy (rated) (Nom) 164 lm/W
  • Color Consistency <6
  • Color rendering index (CRI) 80
  • LLMF At End Of Nominal Lifetime (Nom) 70 %
• Operating and Electrical
  • Line Frequency 20K to 120K Hz
  • Input Frequency 20K to 120K Hz
  • Power Consumption 7 W
  • Lamp Current (Max) 240 mA
  • Lamp Current (Min) 50 mA
  • Wattage Equivalent 17 W
  • Starting Time (Nom) 0.5 s
  • Warm-up time to 60% light 0.5 s
  • Power Factor (Fraction) 0.9
  • Voltage (Nom) 120-277,347 V
  • UL Type UL Type A
• Temperature
  • Ambient temperature range -20 °C to 45 °C
  • T-Case Maximum (Nom) 40 °C
• Controls and Dimming
  • Dimmable Only with specific dimmers
• Mechanical and Housing
  • Bulb Finish Frosted
  • Bulb Material Plastic
  • Product Length 600 mm
  • Bulb Shape T8
• Approval and Application
  • Energy Saving Product Yes
  • Approval Marks RoHS compliance UL certificate DLC compliance
  • Energy Consumption kWh/1000 h – kWh
  • Energy Certifications DLC Standard
• Application Conditions
  • can it be used in closed luminaires Yes
• Product Data
  • Order product name 7T8/MAS/24-835/IF10/P/DIM 10/1
  • Full product name 7T8/MAS/24-835/IF10/P/DIM 10/1
  • Order code 541821
  • Material Nr. (12NC) 929001987004
  • Numerator – Quantity Per Pack 1
  • EAN/UPC – Product/Case 046677541828
  • Numerator – Packs per outer box 10
  • EAN/UPC – Case 50046677541823

Dimensional drawing

Photometric data

Spectral Power Distribution Colour – 7T8/MAS/24-835/IF10/P/DIM 10/1

Light Distribution Diagram – 7T8/MAS/24-835/IF10/P/DIM 10/1

General uniform lighting – 7T8/MAS/24-835/IF10/P/DIM 10/1

Lifetime

Life Expectancy Diagram – 7T8/MAS/24-835/IF10/P/DIM 10/1

Lumen Maintenance Diagram – 7T8/MAS/24-835/IF10/P/DIM 10/1

Life Expectancy Diagram – 7T8/MAS/24-835/IF10/P/DIM 10/1

Life Expectancy Diagram – 7T8/MAS/24-835/IF10/P/DIM 10/1

Lumen Maintenance Diagram – 7T8/MAS/24-835/IF10/P/DIM 10/1

2023 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com

References

• Sustainable LED lighting solutions | Philips lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>