victron energy BPC900110114 Battery Indicator Panel Owner’s Manual
- August 2, 2024
- victron energy
Table of Contents
victron energy BPC900110114 Battery Indicator Panel
Product Information
Specifications:
- Product Name: Battery Indicator Panel & Indicator Eyelet
- Compatibility: Blue Smart and Blue Power IP65 Chargers
- Battery Type: 12V lead acid batteries (flooded, GEL, AGM)
- Connector Type: M8 eyelet
- Fuse: 30A ATO fuse
Product Usage Instructions:
Battery Indicator Panel
The battery indicator shows the status of the battery. It is an accessory for
the Blue Smart and Blue Power IP65 Chargers. It is suitable for 12V lead acid
batteries only (flooded, GEL, AGM).
Victron Battery Indicator Types:
- Battery Indicator Panel (BPC900110114): Battery Indicator Panel (M8 eyelet connector / 30A ATO fuse) BPC900110114
- Battery Indicator Eyelet (BPC900120114): Battery Indicator Eyelet (M8 eyelet / 30A ATO fuse) BPC900120114
Easy to Use:
After using the battery, allow approximately 30 minutes for the battery to
stabilize and the panel to provide an accurate status indication:
- Green Light: Battery at 80%-100% – Does not require charging.
- Orange Light: Battery at 60%-80% – Can be charged.
- Red Light: Battery at 40%-60% – Requires charging.
- No Light: Charge immediately to prevent sulfation if battery is below 40%.
Frequently Asked Questions (FAQ):
Q: What types of batteries are compatible with the Battery Indicator
Panel?
A: The Battery Indicator Panel is suitable for use with 12V lead acid
batteries only, including flooded, GEL, and AGM types.
Q: How long does it take for the battery indicator panel to show a correct
status indication after using the battery?
A: Allow approximately 30 minutes for the battery to regain its steady state
condition and for the panel to display the correct status indication.