GADNIC INCUBA02 24 EGG Incubator User Manual

GADNIC INCUBA02 24 EGG Incubator

Product Specifications:

• Model: INCUBA02
• Capacity: 24 eggs
• Power: 110V
• Weight: 3.5 kg

Product Usage Instructions

Initial Setup:

1. Unpack the incubator carefully and ensure all parts are included.
2. Place the unit on a flat, stable surface near a power outlet.
3. Connect the power cord to the unit and then to a power source.

Egg Incubation Process:

1. Clean the incubator and sterilize it before each use.
2. Place the eggs on the provided trays with the pointed end down.
3. Set the desired temperature and humidity levels according to the egg type being incubated.
4. Turn the eggs manually several times a day to ensure proper development.

Cleaning and Maintenance:

1. After each use, unplug the unit and allow it to cool before cleaning.
2. Remove any leftover eggshells or debris from the trays.
3. Wipe the interior and exterior of the unit with a damp cloth and mild detergent.
4. Regularly check and calibrate the temperature and humidity settings for accurate results.

Frequently Asked Questions

Q: How often should I turn the eggs during incubation?

A: It is recommended to turn the eggs at least 3-5 times a day for even development.

Q: What should be the ideal temperature for hatching chicken eggs?

A: The ideal temperature for hatching chicken eggs is around 99.5°F (37.5°C).

Q: How long does the incubation process usually take?

A: The incubation period varies depending on the type of eggs, but for chicken eggs, it typically takes 21 days.

Please read these instructions carefully before using and store them properly for future reference.

Product Profile

Quick Menu

Product Profile

Part Name

Product Features

1. This egg incubator uses a 360-degree air circulation design that ensures consistent temperature throughout the machine. It is suitable for hatching all kinds of eggs, including parrot, crane, quail, duck, goose, and wild geese eggs.

2. This egg incubator features automatic water intake, eliminating the need to open the cover to add water.
   This reduces temperature and humidity loss and improves the hatching rate.

3. The egg incubator also features a 360° egg turning design.

4. The egg tray is easy to remove and wash, and this machine can be used for incubation, feeding chicks

5. In the event of a power outage, this machine can be connected to a 12V battery using its dual-electric design.

Note:
The machine is showing Celsius instead of Fahrenheit.
This manual uses Celsius to teach customers how to use this egg incubator.

Product Description

Control Panel Description

Install Steps

• Step 1: Put the sink protection net in place to prevent little chicks from drowning.
• Step 2: Place the egg tray on the machine with the patterned side facing up.
• Step 3: Place the machine host on top of the egg tray and ensure that the edges are covered properly. Add 100ml of water to the machine and plug it in. Allow the machine to run for about 3-4 hours to test it.
• Step 4: Once the test is completed, place the fertilized eggs into the egg tray and lay them flat.
• Step 5: Put the machine host and the bottom chassis together, turn on the power supply, and press the ” ” button to test if the egg turning function is working properly.
  This machine will automatically turn the eggs every 90-120 minutes. Once you have confirmed that the machine is working properly, you can start the hatching process.
  It is important to keep the machine powered on throughout the entire process.

Function Introduction

1. Automatic Temperature Control Function:
   We or temptra ture i set 37. Chop For thirs egg have no incue then experience, the C and 38.8 C (09.4 – 101.3 ), I the temperature falls below 57° 968 or goes bove 38.373 (101.48 °F), the machine will sound an alarm.

2. Automatic Egg Turning Function:
   Press the “+” button to see the egg tray rotate. We have set it to turn the eggs every 90-120 minutes during the hatching process.

3. Egg Candling:
   Click the “Egg Candling” button to turn on the LED light, and press it again to turn it off. If the LED light is left on for more than 10 minutes, the system will automatically turn it off.

4. Turn off the Alarm Sound:
   The machine will sound an alarm when it detects abnormal temperature or humidity levels. If you want to stop the alarm, simply press the “-” button.

5. Reset the Machine:
   To reset the machine, press and hold the “+” and “-” buttons for 5 seconds until “888” is shown on the LED screen.

6. Set the Temperature:
   For experienced users or those with specific requirements, click the “Set” button and then press the “+” or *” button to adjust the temperature. After setting the desired temperature, press the “Set” button again.

Direction For Hatching

Machine Start Test

1. Connect the motor line with the machine cover cable
2. Adding 100ml water in the outside sink
3. Plug the power in
4. This testing should last about 3 – 4 hours and the temperature should reach about 37.8 °C(+ 0.3 °C is ok) 100.04 °F (99.5 – 100.58 °F is okay)
5. Finish the test and everything work well.

Note:
The machine is showing the Celsius instead of Fahrenheit.
This manual are taking the Celsius to teach customers to use this egg incubator.

Direction For Hatching

Flow Chart Of The Incubation Process

Steps of Incubation

Take hatching chicks as an example to explain the hatching method:

Step 1: How to select the fertilized egg

1. ferlized elis is 18-15 b- esh gs which are laid within 4-7 days. The temperature for Keeping fertilized eggs is 10-15 C (50 – 59 °F).
2. The surface of the eggshell should have no deformities, cracks, or any spots.
3. To disinfect the eggs, there are two ways:
   Easy way: Clean the surface of the eggs with wet wipes (the bacteria from the eggshell may infect chicks.
   Protestan an ul man them. And rest one (es she Merlie egg te T hours, The the Big end up) and then hatch. The potassium permanganate solution should be prepared and used immediately; otherwise, it will fail due to oxidation.
   There is no need to be very careful in disinfecting fertilized eggs. Do not disinfect if the disinfection conditions cannot be achieved because improper disinfection may reduce the hatching rate. Just make sure the egg surfaces are clean and have no spots.

Step 2: Temperature and humidity
The whole incubation period can be incubated at the default temperature of 37.8 C; there is no need to ading thy am drature a the d, ad as sim of we er i water To the side. i will is aer)

Direction For Hatching

Steps of Incubation

Step 3: Use the egg candle to check each egg

We need to check the development of eggs when the incubation is about 7 days. 2 – Press the egg credie button and light only one egg at a time. Take one egg out and put another egg frilized and anot hash. Mathe es, unterizes egs. This can improve she lins waterlized. or weakly

Step 4: Spray the eggs (This is the hatching period)

When it comes to the 17th day (taking chicken eggs as an example) during the incubation period:

1. Add warm water at 38 C (100.4 °F) to a small spray pot.
2. Use the spray pot to spray the eggs three times; the fog falls on the eggs naturally.
3. Do the spraying 3-5 times a day and close the cover of the machine after spraying. This will help chicks break the shell successfully. Hatching other eggs also needs spraying warm water during the hatching period.

Step 5: Remove the egg trays (This is the hatching period)
When it comes to the 18th/19th day (taking chicken eggs as an example during the incubation period:

1. Stop turning the eggs, and remove the egg tray.
2. Pay attention to the chicken’s broken shell, and spray warm water during this period to prevent the shell from becoming too hard to break out.

Direction For Hatching

Steps of Incubation

Step 6: Cool Down Chicks to 30 °C (86 °F) and Brood Chicks
Take off the eggshell after the chicks break out of their shells. You can leave the chicks in the incubator for 24-48 hours. Then, find a cardboard box and place an insulation lamp (not include) inside to slowly cool the temperature down to 30 °C (86 °F). Chicks need to be kept warm for 7-10 days in general.

Important information

Incubation time:

• Chicken eggs: 21 days
• Goose eggs: 31 days
• Peacock eggs : 28 days
• Duck eggs : 28 days
• Quail eggs: 18 days

Different eggs have different incubation periods.
You need to add 1 day of time if you are hatching in the cool season.
All eggs’ incubation is divided into two stages: the early period and the late period, with the late period being the last 3-5 days of the incubation period (the time when the chicks will break the shell).

Things to do:
You need to take off the egg trays to stop the auto egg-turning function, and you should pay attention to spraying the eggs.
2The white foam incubator can help with heat preservation when you are hatching eggs, so do not throw it away.

Common parameters:
“+” button: Press this button to drive the egg tray to turn.
“-” button: Press this button to stop the alarm sound.
How to reset the machine’s settings: Press the “+” and “-” buttons for more than 5 seconds at the same time.

Working Environment:

Accessories Instructions

Accessories Instructions

1. 1. Please remove the membrane cover from the machine before use, if the machine has one.
2. Check that all the power lines are connected properly before starting the hatching process.
3. There may be slight noise during the use of the product, as the fan in the machine is working, but this is a normal phenomenon and there is no need to worry about it.
4. Please clean the machine and empty all the water from it after the hatching process is finished.
5. Please keep the instructions, foam boxes, and cartons in good condition.
6. If you need to repair or replace any parts, please seek help from the Vanpopubs team via Amazon

Analysis of Reasons for Low Incubation Rate
If you want to analyze the reasons for low incubation rates, you need to break the egg.

1. The chick is fully formed but cannot come out of the shell.
   The reason may be that the humidity was not coordinated well in the last 3-5 days, or the eggshell is too hard to break. We recommend spraying warm water on the egg more frequently to help the chick come out.

2. The egg yolk is not fully absorbed, and the chick has not formed.
   The reason may be that the incubation temperature is not high enough, or the fertilized egg is too old.
   We recommend using fresh fertilized eggs that were laid within the last 3-7 days.

3. Too much mucus, and chicks did not form.
   The reason may be that the humidity was too high during the early incubation period. We recommend keeping the incubator adequately watered. It is not mandatory to add 100ml of water daily.

4. For more questions, please seek help from Vanpopubs through Amazon

Common Problems

The machine is not turning the egg:
The machine automatically turns the egg every certain time, not all the time, to protect the egg and make the egg surface temperature more uniform. The motor speed is relatively slow. If you have any doubt,  you can manually press the “+” button for detection, or use a marker to draw a line on the axis to carefully observe. We tested all of them before packing. If your incubator does not turn the egg, please check whether the motor line and the machine cover line are well-connected, and check whether each roller is installed in place and placed flat. If there is any problem, please contact customer service immediately.

Power supply:
Check whether the power adapter is connected. If not, you can try using a power adapter from a laptop, which is generally universal. If there is any problem, please contact customer service immediately.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>