GADNIC PROYSOL7 Reflector LED Solar Light Instruction Manual
- June 1, 2024
- GADNIC
Table of Contents
GADNIC PROYSOL7 Reflector LED Solar Light
Product Information
This motion-sensor solar light is a convenient and energy-efficient outdoor lighting solution. With a high-sensitivity remote control and adjustable bracket, it offers flexibility and ease of use.
Specifications
- Solar Panel: 5.5V
- Battery: Lithium 3.7V/4400 mA
- LED: SMD2835 / 6000K
- Luminous Flux: 900 lumen
Product Usage Instructions
Installation
- Check that the light can function by covering the solar panel during the day and turning the switch to an ON position.
- Choose a suitable location with direct sunlight from the south for optimal solar charging.
- Determine the appropriate mounting height and secure the light with screws.
Operation
Once installed, you can adjust the lighting mode using the remote control or the mode switch on the light itself:
- Mode 1: Dim-to-Bright Induction Mode
- Mode 2: Off-to-Bright Induction Mode
- Mode 3: Constant On Mode
Additionally, keep the solar panel clean for optimal performance, and use the remote control to set energy-saving modes on cloudy days.
FAQ (Frequently Asked Questions)
Q: How does the light sensor work?
A: The light sensor inside the solar panel automatically detects changes in brightness, turning the light on at night and off at sunrise.
Q: Can I test the light during the daytime?
A: Yes, cover the solar panel first if you want to test the light in bright conditions. The light will flash once and then turn off in such cases.
Brief Introduction
- This solar light is a green energy and the motion sensor turns on the lights.
- With an adjustable bracket, a flexible angle can meet different needs.
- There is a high-sensitivity remote control, you don’t need to climb up if want to change lighting mode the settings, which is very convenient.
- No wiring required, easy to install, charging in the daytime, bright at night automatically.
- This solar light is suitable for your door, garden, yard, garage, patio, platform, shed, park, porch, step, fence driveway, farm, etc.
Specification
- Solar Panel: 5.5V
- Battery: Lithium 3.7V/4400 mA
- LED: SMD2835 /6000K
- Luminous flux: 900 lumen
- Induction distance: 1-5 m
- Remote angle: 120°
- Remote distance: 1-5 m
- Charging time: 6-8 hours
- Waterpro of level: 1P65
Set the lighting mode
- Turn the power switch to the right to the “ON” position,
- Turn on the light and enter mode 1.
- Press the “MODE” button to switch the lighting mode.
MODE 1: Dim-to-Bright Induction Mode
- (Indicator light color: Red)
- Dim light without sensing movement and high light for 15 when the sensor detects a person’s movement. Back on dim light after no further motion is detected.
MODE 2: Off-to-Bright Induction Mode
- (Indicator light color: Green)
- High light for 15 s when detects a person’s movement then turn it off.
MODE 3: Constant On Mode
- (Indicator light color: Blue)
- It will always light at night without induction function.
Warm Tips:
- The light sensor inside the solar panel can automatically detect changes in the brightness of the external environment, making the light auto-on at night and auto-off at sunrise.
- And it will be turned on every day in the set working mode you set. Therefore, when you turn on the light in the daytime,
- It just flashes once, then turns off the light. Please cover the solar panel first if you want to test it in the daytime or bright environment.
Infrared Remote Control Function
Take out the clear insulation sheet first when you use the remote control.
Installation Steps
- Check and ensure the light can work: if you install it in the daytime, please cover the solar panel and
- Turn the power switch to the right to the “ON” position to check the light.
- Choose a good sunshine place: please install the solar light in direct sunlight from the south, and make sure the solar panel can receive good sunlight directly without any shelter.
- Determine the appropriate height: The ideal installation height is 8-12 feet.
- Drill 2 suitable holes where you want to install, and insert the expansion pillar hinges.
- Fix the fixed base and bracket to the wall by screws.
- Adjust the appropriate lighting angle, Connect the bracket and the solar light with screws.
Attention
- As the lamp is solar-powered, its effectiveness depends on the weather, the intensity of sunlight, and the angle of the solar panel. It is recommended that in winter and cloudy days, please use the remote control to set mode 2, to save power better.
- The battery life is more than 5 years. Do not put the battery into the fire in case of an explosion.
- Please keep the solar panel clean.
- SERVICIO TÉCNICO OFICIAL GADNIC
- www.servitech.com.ar
- © 11 6260 1114 (sólo texto)
- [email protected]
Documents / Resources
|
GADNIC PROYSOL7 Reflector LED Solar
Light
[pdf] Instruction Manual
PROYSOL7 Reflector LED Solar Light, PROYSOL7, Reflector LED Solar Light, LED
Solar Light, Solar Light
---|---