GADNIC LUZEME03 Solar Induction Wall Lamp Instruction Manual
- June 1, 2024
- GADNIC
Table of Contents
GADNIC LUZEME03 Solar Induction Wall Lamp Instruction Manual
Solar Induction Wall Lamp Manual
Use methods:
- When charging the built-in battery, place the lamp in a position with direct sunlight.
- Support remote control, more convenient to use
MODE 1: Human sensing mode (Light on when people pass, light off 15
seconds after people leave)
MODE 2: Human sensing + Light mode (light on when people pass, light turn
to slightly on 15 seconds after people leave, light on again when someone
passes)
MODE 3: Low Light mode (The light is always low light, whether there are
people or not)
Attention:
- For the first time, please place the product in a sunny place to charge for several hours.
- When not in use for long periods, charge the product in a sunny spot for one day. For battery maintenance, it’s best to expose it to sunlight once a month.
- The charging time and efficiency of solar panels may vary depending on weather conditions and installation location. Considering the conversion rate of solar energy, using the product in favourable weather conditions can enhance charging efficiency and effectiveness.
- When there is sunlight or other ambient lighting, the LED light won’t turn on day or night if the power switch is off.
- Solar lights should be installed in areas with ample sunlight to ensure the solar panel can fully absorb sunlight and extend the working time of the solar light.
- Solar lights should be adjusted to the optimal angle and direction, typically at a height of 2-3 meters, to maximize sunlight absorption and efficiency.
- During winter or when daylight hours are shorter, it’s recommended to use solar lights in mode 1.
- This light has a leakage protection function. The remote control can only be used after pressing the switch first.
SERVICIO TECNICO OFICIAL GADNIC
www.servitech.com.ar
11 6260 1114 (solo texto)
[email protected]
Read User Manual Online (PDF format)
Loading......