GADNIC CARSEN 12 Tire Deflator Instruction Manual
- June 1, 2024
- GADNIC
Table of Contents
GADNIC CARSEN 12 Tire Deflator
Specifications
- Model: CARSEN12
- Tire Deflator Instructions Included
- Product Dimensions: Not specified
Product Information
The CARSEN12 is a versatile product designed to assist with tire deflation. It features a user-friendly design for easy operation and is built to provide accurate and efficient tire deflation capabilities.
Product Usage Instructions
Tire Deflator Instructions
- Ensure the CARSEN12 device is securely attached to the tire valve.
- Follow the specific deflation instructions provided in the user manual.
- Monitor the tire pressure gauge to achieve the desired pressure level.
- Once the desired pressure is reached, remove the CARSEN12 from the tire valve.
- Repeat the process for each tire as needed.
FAQ
-
How do I use the CARSEN12 for tire deflation?
To use the CARSEN12 for tire deflation, follow the steps outlined in the product usage instructions provided in the user manual. Ensure proper attachment to the tire valve and monitor the pressure gauge for accurate results. -
What are the dimensions of the CARSEN12?
The product dimensions for the CARSEN12 are not specified in the user manual. Please refer to the manufacturer’s specifications or contact customer support for further details.
TIRE DEFLATOR INSTRUCTIONS
-
With the slide valve pushed forward, screw the valve stem adapter onto the valve stem in a clockwise direction.
-
Push the valve core remover forward until it engages the valve and turn anticlockwise to remove the valve.
-
When the valve core is removed it will push the core remover out and the gauge will read the tire pressure.
-
Pull on the slide valve to release air. Push in the slide valve to stop air and check the pressure.
NOTE : Gauge will not show correct pressure while deflating. -
When the desired pressure is reached, push the valve core remover in and turn clockwise until the valve seats firmly.
NOTE : Do not overtighten the valve core. -
Remove the unit by unscrewing the valve stern adapter in an anticlockwise direction. Ensure a valve cap is placed on the valve stem to prevent ingress of debris.
SERVICIO TÉCNICO OFICIAL GADNIC www.servitech.com.ar © 11 6260 1114 (sólo texto) [email protected]