VOYAGER BAYHSMT310 Oversized Motor Kit Instruction Manual
- July 31, 2024
- Voyager
Table of Contents
VOYAGER BAYHSMT310 Oversized Motor Kit
Specifications:
- Model Numbers: BAYHSMT300, BAYHSMT301, BAYHSMT302, BAYHSMT303, BAYHSMT304, BAYHSMT309, BAYHSMT310*
- Compatible with : E/GCC180A3,4 E/GCC180AW E/GCC210A3, E/GCC240A3 E/GCC210A4, E/GCC240A4 E/GCC210AW, E/GCC240AW EAC210AD EAC240AD, EAC270AD
Product Usage Instructions
Safety Precautions:
Only qualified personnel should install and service the equipment. Ensure to
observe all precautions mentioned in the literature and on the equipment
itself. Failure to adhere to safety guidelines may result in serious injury or
death.
Installation:
- Disconnect Power: Before servicing, disconnect all electric power sources and discharge capacitors to avoid potential hazards.
- Remove Components: Remove the evaporator access panel, loosen the locknut and tension adjustment bolt, remove the belt, and remove the fan sheave.
- Wire Connection: Lead wires must be removed from the standard motor for use on the oversized motor.
Warnings, Cautions, and Notices:
Read the manual thoroughly before operating or servicing the unit. Pay
attention to safety advisories which are categorized as follows:
- WARNING: Indicates a potentially hazardous situation that could result in death or serious injury.
- CAUTION: Indicates a potentially hazardous situation that could result in minor or moderate injury.
- NOTICE: Indicates a situation that could result in equipment or property damage only.
Environmental Concerns:
Proper field wiring and grounding are crucial to prevent hazards. Ensure
all field wiring is performed by qualified personnel to avoid fire and
electrocution risks. Follow NEC and local electrical codes for installation
and grounding requirements.
FAQ
Q: Can unqualified individuals perform the installation of the Oversized
Motor Kit?
A: No, only qualified personnel should install and service the equipment
to prevent serious injury or death.
Q: What should be done before servicing the equipment to ensure safety?
A: Before servicing, disconnect all electric power sources, discharge
capacitors, and follow proper lockout/tagout procedures.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>