Qubo QBOOK Smart Door Lock Instruction Manual

Qubo QBOOK Smart Door Lock

QBOOK Smart Door Lock ESSENTIAL

Specifications

• 5-Way Secure access methods: Fingerprint, Pincode, Access Card,Mobile App & Mechanical Key
• Voice Guidance for convenient unlocking
• Low battery alerts when voltage goes below 4.8V

Product Usage Instructions

What’s in the box?

• Fixed Screw
• Mechanical Key Cover
• Mounting Screw (2Pcs)
• Back Panel
• Pressure Spring
• Square Shaft
• Mortise
• Fixed Screw (4 pcs)
• Connecting Screw Bolt (2 pcs)
• Front Panel
• Fixed Screw (4 pcs)

Let’s take a closer look

The QBOOK Smart Door Lock ESSENTIAL consists of various components including a fixed screw, mechanical key cover, mounting screws, back panel, pressure spring, square shaft, mortise, connecting screw bolts, front panel, and additional fixed screws.

What you will need?

Before starting the installation process, make sure you have the following items:

• QBOOK Smart Door Lock ESSENTIAL
• Screwdriver
• Batteries

Let’s Get Started – Installation Steps

Follow these steps to install the QBOOK Smart Door Lock ESSENTIAL:

1. Ensure your door is compatible with the lock.
2. Remove any existing door lock or handle.
3. Insert the mortise into the door frame.
4. Attach the back panel to the inner side of the door.
5. Insert the front panel into the outer side of the door.
6. Secure the lock using the provided screws.
7. Test the lock by trying different access methods.

Safety Guidelines

When installing and using the QBOOK Smart Door Lock ESSENTIAL,please keep the following safety guidelines in mind:

• Ensure proper electrical grounding during installation.
• Do not expose the lock to extreme temperatures or moisture.
• Keep the lock away from children’s reach.
• Regularly check and replace batteries as needed.

Certification & Disclaimers

The QBOOK Smart Door Lock ESSENTIAL meets all necessary certifications and complies with safety standards. However, please read all disclaimers and warranties provided in the product documentation before use.

FAQ

Q: How do I replace the batteries?

A: When the battery voltage goes below 4.8V, a voice prompt will guide you to replace all batteries. To replace the batteries, follow these steps:

1. Locate the battery compartment on the lock.
2. Open the compartment using a screwdriver or by following the lock’s instructions.
3. Remove the old batteries.
4. Insert new batteries, ensuring correct polarity.
5. Close the battery compartment.

Q: How can I unlock the door if the lock fails or loses power?

A: In case of lock failure or power loss, you can use the mechanical key provided with the QBOOK Smart Door Lock ESSENTIAL. Insert the key into the keyhole and turn it to unlock the door manually.

Discover Keyless Smart Living with Qubo Smart Door Lock ESSENTIAL.
No keys, no hassle, no fuss. Qubo smart lock keeps the right ones in and wrong ones out of your home.
Qubo Smart Lock ensures layers of security and key-less convenience with its 5-Way Secure access methods (Fingerprint, Pincode, Access Card, Mobile App & Mechanical Key). Conveniently unlock with Voice Guidance & Get Low battery alerts. Enjoy the convenience of smart security today.

WHAT’S IN THE BOX?

Disclaimer
This package list is for reference only, and all contents are subject to the actual products.

Let’stake LOOK a closer

EXPLODED VIEW OF YOUR DEVICE

1. Fixed Screw
2. Mechanical Key Cover
3. Mounting Screw (2Pcs)
4. Back Panel
5. Pressure Spring
6. Square Shaft
7. Mortise
8. Fixed Screw (4 pcs)
9. Connecting Screw Bolt (2 pcs)
10. Front Panel
11. Fixed Screw (4 pcs)

Disclaimer – Please press the spring at the end of shaft before installing it

What else you will NEED?

Installation Preparation

Change latch direction- by default it is on right in-right out

1. Pull the Latch shifting plate to another side
2. Push the latch into the mortise and turn 180 degree

Change handle direction (Left and Right)
By default, Door lock is for Right – Out, Right-In doors. To change handle direction of front panel to left in-left out read instructions below:

CHANGE HANDLE DIRECTION OF BACK PANEL

Step 1: Take out the Screws

Step 2: Rotate the handle to the other end

Step 3: Fasten the screws

Installation

Step 1: Position the ‘drilling template’ (provided in box) on the door and drill holes as indicated

Step 2: Install the Mortise as mentioned in the picture and tighten the screws to fix the mortise on the door.

Step 3: Fix screw bolt on the front panel, Place Square shaft and pressure spring into the bore.

Step 4: Pass the connection cable through the bore. Then align and insert square shaft into mortise holes to make the front panel fit against the door closely.

Step 5: Insert the connecting cable through the mortise and front panel into related socket.

Step 6: Fasten the back panel to the door using Mounting screws.

Step 4: Install the batteries and the battery cover. Then install the strike plate on the door frame to finish the installation. Please check handle and mechanical key if they are working properly.

MULTIPLE WAYS TO ACCESS YOUR DOOR

SETUP ACCESS FOR YOUR SMART DOOR LOCK

ACCESS SETUP THROUGH QUBO APP

Step 1
Download the Qubo App from Google Play or Apple App Store by scanning the QR Code below.

Step2
Create an account on Qubo App. If you are an existing user, login with your existing credentials and follow the instructions to get started.

ACCESS SETUP MANUALLY

Step 1: Setting up Admin Code

• Touch the screen to activate
• Default Master Pin is 123456
• Press* followed by# wait for audio prompt
• Press 3 Enter Admin code code and press #
• Follow instructions as guided by Device

Step 2: To add user PIN code press 1

Step 3: Enter user PIN code (6-12 digit) and confirm with#key.
To know how to add/delete access options of your Qubo Smart Door Lock Essential, please scan below the QR Code

Note Access Setup is recommended through Qubo Mobile App.

HOW TO UNLOCK FROM OUTDOOR/ FRONT PANEL

Outdoor I Front panel

1. Touch keypad by palm from below to up to lighten keypad.

2. Enter the enrolled PIN code with end of[#].
   Voice prompt “Successful”.

3. Press down the handle to open the door.

Outdoor Front panel

1. Place the enrolled nger properly on the ngerprint sensor area until one beep sound and voice prompt”Successful.”
2. Press down the handle to open the door.

Outdoor Front panel

1. Place the enrolled access card properly on the card reader area until one beep sound and voice prompt “Successful.”
2. Press down the handle to open the door.

UNLOCK BY MECHANICAL KEY

Key hole is at the bottom of the front panel, Insert the key into key hole and rotate it. Then Press the door handle downwards to open the door.

Caution: In case you have forgotten your PIN Code, battery of device has run out or there are some system errors, please use Mechanical key to open the lock

LOCK FROM OUTDOOR/ LOCK FROM INDOOR/ DOUBLE LOCK FROM INDOOR

OTHER FUNCTIONS

Restore to factory default settings

Operation instructions

1. Open back cover and find the reset button.
2. Keep reset button pressed, it will produceting sound 3 times then release the button”
3. After that all user data and settings will be deleted.

Reboot:
Press the reboot button to restart the lock when the system is unresponsive, no user data is deleted.

EMERGENCY POWER SUPPLY

When the battery voltage is too low and cannot be opened from outside, connect a 5V power supply via Micro USB port at the front. Then unlock the door and replace all batteries immediately.

Caution: Do not mix old and new batteries together in replacement.

REPLACE BATTERY

Caution: When battery voltage goes below 4.8V, a voice prompt will guide you to replace all batteries at each unlocking

Safety Guidelines

Safety instructions:

• Read and understand all instructions before using this smart lock. Damages caused by failure to follow instructions is not covered by the warranty.
• It is recommended to use the enclosures /accessories specified by the company.
• For optimal battery performance, please use only alkaline batteries.
• Do not forcibly disassemble this product in order to avoid alarm sound or damage to the product.
• Do not scratch the fingerprint reader with sharp objects, otherwise it may cause permanent damage.
• Do not expose the product to corrosive substances, so as not to damage the outer
• When low battery alarm is triggered, please replace all the batteries in time.
• After the Door Lock is installed, please modify the default master PIN code immediately and keep the mechanical key in a safe place. Do not disclose the PIN code to any unknown person.

Warning:

• Do not dispose batteries improperly, as they can cause fire or explosion.
• Do not short- circuit the two poles of battery lead with metal objects as it can cause an explosion.
• Making sure replacement or maintenance are done by professional person authorized by Qubo .
• Your warranty may invalidate if you used accessories produced by other manufacturer or not recommended by Qubo .

Disposal of used battery and lock

• Please understand the local electronic product classification and collection system.
• Please follow the local regulations and do not discard used batteries into ordinary household garbage.
• Proper disposal of used product helps to avoid potential negative impacts on the environment and human health.

Certification

Declaration for Compliance of Reduction in the use of Hazardous Substances (ROHS) provisions of the E-Waste (Management) Rules, 2016.
We, Hero Electronix Private Limited, being the producer as per E-Waste (Management) Rules, 2016, hereby declare that the device is in compliance with the ROHS provisions of the above said rules.
In compliance with the E-Waste (Management) Rules, 2016, the content of hazardous substances in the device (with the exemption of the applications listed in Schedule II of the E-Waste (Management) Rules, 2016) are as follows:

• Lead: not exceeding 0.1% by weight
• Cadmium: not exceeding 0.01% by weight
• Mercury: not exceeding 0.1% by weight
• Hexavalent Chromium: not exceeding 0.1% by weight
• Polybrominated Biphenyls: not exceeding 0.1% by weight
• Polybrominated Di phenyl Ethers: not exceeding 0.1% by weight

SUPPORT

In case you need further help setting up this device:

• Visit the support section on our website and download the detailed user manual.
• Visit our YouTube page and watch the How-To videos.
• Contact our customer care center at 1800-572-5757.

Disclaimers

• Images used are for reference purpose only. Actual product might vary in terms of colour and composition.
  All related logos are trademark of Hero Electronix Pvt. Ltd.

Hero Electronix Pvt Ltd.
503, Rectangle – 1, D-4, Saket District Centre, New Delhi – 110017
www.quboworld.com , [email protected]
1800-572-5757

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>