Qubo HCB01 QBOOK Baby Cam User Guide
- June 13, 2024
- Qubo
Table of Contents
Qubo HCB01 QBOOK Baby Cam User Guide
Safety Guidelines
Warning: Wires can be a hazard for the baby. Keep the cable provided in a box away from children.
- Do not immerse the device in any kind of liquid.
- Do not attempt to dry the device using any external heat source, a microwave or a hair dryer.
- Keep the device and all its components out of the reach of children and pets.
- Clean the device with a dry soft cloth. Do not use any abrasives or harsh chemicals.
- Do not expose the device to steam or extreme temperatures.
- This device does not have an on/off button. Unplug the power adapter to turn off the device.
- Only use the power adapter and cable included with the device. If the power adapter or cable appear to be damaged, stop using it immediately and contact Qubo Customer Care.
- Do not plug multiple devices into the same wall socket.
- Do not expose the device to temperatures below 0°C or above 40°C.
- Install the device in accordance to the building and city code.
- All Qubo products and services are meant for ages 18 and above.
- This device is meant to be used for monitoring purposes and for personal use only. This is not intended to be used as a safety product.
- This device does not alert, signal or trigger any kind of response via a panic button or siren.
- This device is intended for non-time critical control and management of data and property.
- This product is not a toy, do not allow children to play with it.
- The camera might get hot. Baby skin is very sensitive, hence ensure baby does not hold the camera.
- Install the camera at a place where your child can’t reach. Device is prone to damage if kids try to pull the penguin wings or feet.
- The Silicon skin material is FDA approved but it is always better to ensure that kids do not put it in their mouth.
- The product must be placed on a stable horizontal surface or properly mounted on the wall, to prevent it from falling over during usage.
- Our products and services will require certain input parameters to perform hassle free; including but not limited to, an active internet connection and a live power supply.
- Users are solely liable for storing and managing the data and information that is stored on the device or via services. We are not responsible for the loss or management of such data .
- Do not touch the device or wires connected to the device during lightning.
Meet QUBO
Tired of the sleepless nights? Missing your baby’s milestones? Concerned about your baby’s safety? Is your baby being looked after?
Our baby monitor comes with the best-in-class Advanced Artificial Intelligence features. Remotely monitor your little one from anywhere at any time, no matter day or night. You can interact with your child using Two-Way Talk.
Can’t hear the cries but have a hunch that your baby is crying? Don’t worry, with Baby Cry Alert, you will be notified instantly when your child is crying. The Qubo Baby Cam can also soothe your child when it detects crying by playing a lullaby or even a song recorded by you. Scared that your baby might roll off the bed when you are not in the room? With Virtual Cradle, the Qubo Baby Cam lets you create a safe zone around the baby and notifies you if the baby goes out of the zone. Can’t get enough pictures of your baby? Qubo Baby Cam records your child’s special moments through the day and creates a collage for your memories.
What’s in the BOX?
- Baby Cam
- Power Adapter
- Cable
- Deco Plate (Attached)
- Wall Anchors (2 units)
- Wall Screws (2 units)
- Deco Plate Screws (2 units)
- SD Card
LED states and meaning
Red LED blinking rapidly| Ready for setup
Red LED continuous| Not connected to Wi-Fi
Green LED continuous for 5 seconds| Device is ready
Green LED continuous| 2-Way Talk begins
Let’s take a closer LOOK
Reset Button
**SD Card Slot
**
What will you NEED?
Wi-Fi Network
- 2.4 GHz Wi-Fi (802.11 b/g/n) network
- Greater than 2 Mbps network upload speed
iOS
- iOS 11 or higher
Android
- Android 8.1 or higher
Power
- 110V – 240V
Let’s get STARTED
Step 1
Insert the SD Card into the SD Card slot.
Step 2
Connect the power cable that comes with the Baby Cam to a power source.
Step 4
Create an account on the Qubo App and follow the instructions to get started.
If you are an existing Qubo user, you can simply go to Add Device on the Qubo
App.
Choose an effective monitoring Position
Keep it close to your baby
The Baby Cam should be placed maximum 1 – 2 meters away from the baby.
Mount it
We find that mounting the Baby Cam on a wall above the bed/crib, facing
downwards, is the best way to monitor your child.
Keep it in range of your router
Make sure the Baby Cam gets good Wi-Fi at the location it is installed to
ensure you don’t miss any updates.
How to mount your Baby Cam?
Step 1: Rotate the deco plate clockwise to expose the holes for the wall screws. The screw holes to fix the deco plate will also fall into place.
Step 2: Fix the deco plate into the base of the Baby Cam using the deco plate screws provided in the box. The deco plate screws can only be screwed into the smaller holes; towards the center of the deco plate.
Step 3: Fix the device on the wall using the wall screws. We recommend marking the spots where you intend to drill the holes. Use wall anchors (included) to hold the screws if you want to mount the device on hard surfaces such as brick or stone
More than just a Baby Monitor
Baby Cry Alert
Qubo Baby Cam will notify you through the Qubo App when it detects continuous
baby crying for more than 15 seconds. Presence of ambient noise could impact
detection.
Virtual Cradle
Qubo Baby Cam allows you to create a safe zone around your baby through the
Qubo App. It will notify you instantly if the little one moves out of that
zone.
Disclaimer
Baby Cry Alert & Virtual Cradle are beta features. They work best when the
device is installed 1 to 1.5 meters away from the baby, above the bed/crib
facing downwards such that the camera gets a full view of the baby.
Our endeavor is to keep adding new features to improve your experience. Our customer care team would love to hear your feedback on how we can make your experience better.
Support
In case you need further help setting up this device:
- Visit the support section on our website (www.quboworld.com) and download the detailed user manual.
- Visit our YouTube page and watch the How-To videos.
- Contact Qubo Customer Care centre at 1800-572-5757.
Disclaimers
- For optimal performance, the device requires a Wi-Fi upload speed of more than 2 Mbps.
- Hero Electronix Pvt. Ltd. reserves the right to make changes to existing services, without prior notice, at its sole discretion.
- Images used are for reference purpose only. Actual product might vary in terms of colour and composition.
- All related logos are trademark of Hero Electronix Pvt. Ltd.
- Certain features may not be available at the time of launch.
Hero Electronix Pvt Ltd.
503, Rectangle – 1, D-4, Saket District Centre,
New Delhi – 110017
www.quboworld.com
helpdesk@quboworld.com
1800-572-5757
Documents / Resources
| Qubo
HCB01 QBOOK Baby
Cam
[pdf] User Guide
HCB01, HCB01 QBOOK Baby Cam, QBOOK Baby Cam, Baby Cam
---|---
| Qubo
HCB01 QBOOK Baby
Cam
[pdf] User Guide
HCB01, HCB01 QBOOK Baby Cam, QBOOK Baby Cam, Baby Cam, Cam
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>