1799209.095 MAULcargo Paketwaage Parcel Scale Instruction Manual

1799209.095 MAULcargo Paketwaage Parcel Scale

Specifications

• Power Source: 9V block battery
• Weighing Units: kg, lb
• Auto   Switch-off: After 2 minutes
• Special Feature: Tare function for added weight

FAQs

• Q: What type of battery does the scale use?
  • A: The scale uses a 9V block battery.
• Q: How do I switch between kg and lb units?
  • A: Press the mode button to toggle between kg and lb units.
• Q: How does the tare function work?
  • A: The tare function allows you to reset the scale to zero with added weight on it, useful for weighing items with packaging.

PRODUCT USING INSTRUCTION

• Battery
  • One 9V block battery is included; this should be placed into the battery compartment in the manner indicated on the base plate.
• Positioning of the Scales
  • Please ensure that the scales are in a horizontal position.
• Weighing ( )
  • After switching on the scales with the „ “–button, all segments are shown on the display. Please wait until the zero appears.
  • Then place the weight on the scales and read off the weight shown.
• Net Weighing (tare)
  • Place an empty container (or the first weight) on the scales and press the „tare“–button until the zero appears.
  • Fill the container (or place the second weight on the scales). Only the additional weight is indicated in the display.
• Switch-off ( )
  • Press the „ “-button. Automatic switch-off after 2 minutes whether weight is on the scales or not, if no change of weight occurs in this time.
• Changing the weighing units: kg, lb (mode)
  • This scale can show the weight in either kg or lbs. Press the „mode“–button until the required weighing unit appears.
• Counting ( )
  • When the „zero“ appears place the reference weight on the scales. (Attention: the unity weight should be over 50 g for a correct counting function.)
  • Then press the „ “ -button and hold until „100“ appears in the display. Press the „mode“–button and choose the reference quantity (25; 50; 75 or 100) and then press the „ “–button once again.

User Calibration

• If required the scales can be recalibrated. Turn the scales on by pressing the „ “-key. The display shows „88888“. Before the display passes to zero, press four times the „ “-key and keep it pressed after the fourth time.
• The display shows a digit. Press again the „ “-key.
• The display shows „CAL“ and „40,00“. Place a 40 kg-calibration weight on the scales. After 4 seconds the display shows „120,00“, place now a 120 kg-calibration weight on the scales.
• After 4 more seconds „PASS“ and finally the normal weighing screen appears in the display. The scales are now recalibrated.
  • Important: during recalibration the scales should not experience any movement or draught!

Explanation

1. 1. Switch-On
   • After pressing the „ “–button all symbols appear. One can check if all segments are shown correctly. The “zero” which then appears shows that the scales is ready for weighing.
2. Negative Weight Display
   • Press the „tare“–button again.
3. Overload
   • If the weight on the scales is heavier than the max. weight then „O.Ld“ appears in the display.
4. Power Supply
   • If „LO“ appears, this means that the battery is used up and has to be replaced.

This device corresponds to the requirements stipulated in the EC-directives 2014/31/EU. Note: Extreme electromagnetic influences e.g. radio units in the immediate vicinity may affect the displayed values. Once the interference has stopped, the product can once again be used normally. The scales are not legal for trade.

Precision

• This device corresponds to requirements stipulated in 2014/31/EU. Every scale has been carefully calibrated and controlled during the production process.
• The tolerance is ± 0,5% ± 1 digit (at Temperatures between +5° and +35° C).
• Incorrect display values due to damage attributable to improper handling, mechanical damage, or malfunction are exempt from liability.
• Damages due to faults are also exempt from the guarantee. No liability is accepted for consequential damages or losses by the buyer or the user.

CONTACT INFORMATION

• JAKOB MAUL GmbH
• Jakob-Maul-Str. 17
• 64732 Bad König
• Fon: +49 (0)6063/502-100
• Fax:+49(0)6063/502-210
• E-Mail: contact@maul.de
• www.maul.de.

Packaging and disposal instructions

Documents / Resources

| MAUL 1799209.095 MAULcargo Paketwaage Parcel Scale [pdf] Instruction Manual
1799209.095, 1799209.095 MAULcargo Paketwaage Parcel Scale, MAULcargo Paketwaage Parcel Scale, Paketwaage Parcel Scale, Parcel Scale, Scale
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>