UL5 Screeneo Smart Ultra Short Throw Projector

“`html

Product Information

Specifications

• Product Name: Screeneo UL5 Smart Ultra Short Throw
  Projector

• Model: UL5

• Projection Technology: DLP

• Resolution: Full HD (1920 x 1080)

• Brightness: 2200 lumens

• Contrast Ratio: 150,000:1

• Throw Ratio: 0.21:1

• Connectivity: HDMI, USB-C, Bluetooth

• Speaker Output: Built-in speakers

• Dimensions: (W x H x D) 450 x 440 x 297 mm

• Weight: 7.9 kg

Product Usage Instructions

1. Setting Up the Projector

Follow these steps to set up the projector:

1. Place the projector on a stable surface.
2. Connect the power supply to the projector.
3. Prepare the remote control for use.
4. Power on the projector and complete the setup process.

2. Connect to Playback Devices

You can connect playback devices using HDMI, USB-C, HDMI ARC, or
a dongle. Follow these steps:

1. Connect the device to the corresponding port on the
   projector.

3. Connect to External Speakers or Headphones

To connect external speakers or headphones via Bluetooth:

1. Enable Bluetooth on the projector.
2. Pair your external speakers or headphones with the
   projector.

4. Media Playback

You can play videos from USB storage devices. Insert the USB
drive into the projector and use the media player interface to
select and play videos.

5. Change Settings

You can adjust various settings on the projector such as display
settings, sound settings, and network settings. Navigate to the
settings menu using the remote control.

6. Maintenance

To ensure optimal performance, regularly clean the projector and
update the firmware as needed.

Frequently Asked Questions (FAQ)

Q: How can I register my product for support?

A: You can register your product and get support at
www.philips.com/support

Q: Can I play videos wirelessly on this projector?

A: The Screeneo UL5 Smart Projector does not support wireless
video playback directly. You will need to connect playback devices
physically.

“`

Screeneo UL5 Smart
Ultra Short Throw Projector

User Manual

Register your product and get support at
www.philips.com/support

Table of contents
Introduction……………………………………….. 3
Dear customer …………………………………………………… 3 About this user manual…………………………………….. 3 What’s in the box………………………………………………. 3 Customer service centre……………………………………. 3
1 General safety information ………….. 4
Setting up the product……………………………………… 4 Repairs ……………………………………………………………….. 4 Power supply……………………………………………………… 5
2 Overview……………………………………….5
Front view ………………………………………………………….. 5 Side view…………………………………………………………….. 5 Top view……………………………………………………………… 6 Bottom view ………………………………………………………. 6 Remote control………………………………………………….. 6
3 Initial setup……………………………………7
Place the projector ……………………………………………. 7 Connect to power supply …………………………………. 8 Prepare the remote control ……………………………… 8 Power on and set up the projector ………………….. 8
4 Connect to playback devices……….10
Connect to devices through HDMITM………………10 Connect to devices through USB-C…………………10 Connect to devices through HDMITM ARC ……..11 Connect to a dongle ………………………………………..11

5 Connect to external speakers or headphones …………………………………. 12
Bluetooth connection………………………………………12
6 Media playback……………………………13
Play videos from USB storage devices …………….13
7 Change settings …………………………..14
8 Maintenance………………………………..16
Cleaning ……………………………………………………………16 Update firmware………………………………………………16
9 Troubleshooting ………………………….18
10 Appendixes………………………………….20
Technical data …………………………………………………..20 CE statement…………………………………………………….21 FCC statement…………………………………………………..21 Canada regulatory compliance……………………….21 Other notice ……………………………………………………..22

Introduction
Dear customer
Thank you for purchasing this projector. We hope you enjoy this product and the many functions it offers!
About this user manual
The quick start guide supplied with this product allows you to start using this product quickly and easily. Detailed descriptions can be found in the following sections of this user manual. Read the entire user manual carefully. Follow all safety instructions in order to ensure proper operation of this product (see General safety information, page 4). The manufacturer accepts no liability if these instructions are not followed.
Symbols used
Notice
This symbol indicates tips that will help you use this product more effectively and easily.
DANGER! Danger of personal injury! This symbol gives warning of danger of personal injury. Physical injury or damage can result from improper handling.
CAUTION! Damage to the product or loss of data! This symbol gives warning of damage to the product and possible loss of data. Damage can result from improper handling.

What’s in the box

a Screeneo UL5 Smart projector (SCN355/INT)

b Remote control with 2 AAA batteries

c Quick Start Guide with Warranty Card

d AC adapter

e AC power cables with plugs x 3

a

b

c

d

Quick Start Guide
e

Customer service centre
The Support page, warranty card, and user manuals can be found here: Web: www.philips.com/support Support Contacts: International Phone: +41 215 391 665 Please ask your provider for international call costs! Mail: philips.projector.eu@screeneo.com Access our FAQ websites: https://support.philipsprojection.com https://community.philipsprojection.com

3

Philips · Screeneo UL5 Smart

1 General safety
information
Take note of all warning and safety notes indicated. Do not make any changes or settings that are not described in this user manual. Incorrect operation, and improper handling can lead to physical injury, damage to the product or loss of data.
Setting up the product
This product is for indoor use only. Place the product securely on a stable, flat surface. To help avoid possible injuries to persons or damage to the product itself, position all cables in such a way that no one will trip over them.
Do not operate the product in damp rooms. Never touch the mains cable or the mains connection with wet hands.
Never operate the product immediately after moving it from a cold location to a hot location. When the product is exposed to such a change in temperature, moisture may condense on the crucial internal parts.
The product must have sufficient ventilation and must not be covered. Do not put the product in closed cabinets, boxes, or other enclosures when in use.
Protect the product from direct sunlight, heat, intense temperature fluctuations and moisture. Do not place the product in the vicinity of heaters or air conditioners. Observe the information on temperature listed in the technical data (see Technical data, page 20).
Prolonged operation of the product causes the surface to become hot. In case of overheating, the product automatically switches to standby mode.
Do not allow liquids to leak into the product. Turn off the product and disconnect it from the mains supply if liquids or foreign substances leaked into the product. Have the product inspected by an authorised service centre.
Always handle the product with care. Avoid touching the lens. Never place heavy or sharp objects on the product or on the power cable.
If the product gets too hot or emits smoke, shut it down immediately and unplug the power cable. Have your product checked by an authorised service centre. Keep the product away from open flames (e.g. candles).

The remote control is with batteries (type AAA).
DANGER!
Risk of explosion with incorrect type of batteries! There is a risk of explosion if the wrong battery type is used.
Do not expose the batteries to excessive heat such as sunshine, or open fire. Do not expose the batteries to low air pressure at high altitude. Under the following conditions, a layer of moisture can appear inside the product which can lead to malfunctions:
· if the product is moved from a cold to a
warm area;
· after a cold room is heated; · when the product is placed in a damp
room. Proceed as follows to avoid any moisture buildup:
1 Seal the product in a plastic bag before moving it to another room, in order for it to adapt to room conditions.
2 Wait one to two hours before you take the product out of the plastic bag.
The product should not be used in a very dusty environment. Dust particles and other foreign objects may damage the product. Do not expose the product to extreme vibrations. This may damage the internal components. Do not allow children to handle the product without supervision. The packing materials should be kept out of the hands of children. For your own safety, do not use the product during thunderstorms with lightning.
Repairs
Do not repair the product yourself. Improper maintenance can result in injuries or damage to the product. The product must be repaired by an authorised service centre. Please find the details of authorised service centres on the warranty card supplied with this product. Do not remove the type label from this product, as this will void the warranty.

4

Philips · Screeneo UL5 Smart

Power supply

2 Overview

Use only a power adapter which is certified

for this product (see Technical data, page 20). Check whether the mains voltage of the power

Front view

supply matches the mains voltage available at the

setup location. This product complies with the

voltage type specified on the product. The power outlet shall be installed near the

a

product and shall be easily accessible.

b

CAUTION!
Always use the button to turn the projector off.
Turn off the product and unplug from the power outlet before cleaning the surface (see Cleaning, page 16). Use a soft, lint-free cloth. Never use liquid, gaseous or easily flammable cleaners (sprays, abrasives, polishes, alcohol). Do not allow any moisture to reach the interior of the product.
DANGER!
Risk of eye irritation! This product is equipped with a high power RGB laser, which emits very bright light. Do not look directly into the projector lens during operation. This could cause eye irritation or damage.

a
·
·
·

Switch the projector on or to standby mode.
When the projector is on, the LED lights up in white.
When the projector is in standby mode, the LED lights up in red.

b IR sensor

Side view

cd

ef
c USB-C Connect to the AC adapter.
d USB-C Connect to a USB-C port on a playback device.
e HDMI Connect to an HDMITM output port on a playback device.
f USB-A Connect to a USB storage device/dongle.

5

Philips · Screeneo UL5 Smart

Top view
b
a Projection lens b Autofocus sensor
Bottom view

Remote control

j

a

b

c

d

e

k

f

a

g

l

h

m

i

89.25

47.00

a
47.00

116.75

a Tripod socket
Screw size: M6 (max. length = 20 mm; min. length = 15 mm)

a Switch to a different input source.
b Adjust the focus automatically or manually.
c OK Confirm a selection on the screen.
d Navigation buttons (Up, Down, Left, Right)
· Navigate items on the screen. · Press / to change the value for the
current setting.
e Access the home screen.
f
Access the projector’s settings menu.
g /
Increase or decrease the volume.
h
Launch the mouse function. Press OK to click. Press any navigation button will stop the Mouse or press again the mouse key will make it disappear. –> Press the mouse

6

Philips · Screeneo UL5 Smart

key will freeze the cursor. Press it again to unfreeze the cursor. i Toggle between different picture presets. j Switch the projector on or to standby.
k
· Return to the previous screen or exit the
current screen.
· Open the sidebar when home screen
displays.
l Mute the speakers.
m Toggle between different brightness modes.

3 Initial setup
Notice Make sure all devices are disconnected from their power supplies before establishing or changing any connections.
Place the projector
1 Place the projector on a flat surface such as a table in front of the projection surface. This is the most common way to position the projector for quick setup and portability.

2 If the projection direction is incorrect, press on the remote control to access the
projector’s settings menu and select Projector > Installation > Front Table.

Source

Location

Front Table

Picture

lnstallation

Rear

Sound

4-Corner Keystone

Front Ceiling

Projector

Vertical Keystone

Rear Ceiling

System

Digital Zoom

Support

Autofocus on startup

7

Philips · Screeneo UL5 Smart

Connect to power supply
CAUTION! Always use the button to turn the projector on and off.

1 Open the battery compartment.
2 Insert the supplied batteries (type AAA) with correct polarity (+/-) indicated.
3 Close the battery compartment.

1 Select a supplied power cable with the correct plug (EU/UK/US).
2 Connect the power cable to the AC adapter. 3 Connect the AC adapter to the USB-C port on
the projector. 4 Connect the power cable to an electrical
socket.
· The power LED on the projector lights up
in red.
c
b ad
Prepare the remote control
CAUTION! The improper use of batteries can lead to overheating, explosion, risk of fire and injury. Leaking batteries can possibly damage the remote control. Never expose the remote control to direct sunlight. Avoid deforming, dismantling or charging the batteries. Avoid exposure to open fire and water. Replace empty batteries immediately. Remove the batteries from the remote control if not in use for long periods of time. Dispose of the used batteries according to the manufacturer’s instructions and local environment regulations for your region.

· When using a remote control with infrared
signals, point the remote control at the IR sensor on the projector, and make sure there is no obstacle between the remote control and the IR sensor.
Power on and set up the projector
Power on/off the projector
· To turn on the projector, press and hold
on the projector for 2 seconds or press on the remote control. The power LED on the projector turns from red to white.
· To turn off the projector, press and hold on
the projector/remote control for 2 seconds or press this button twice. The projector enters standby mode and its power LED turns from white to red.
· To fully shut down the projector, disconnect
the power cable from the electrical socket.
Set up the projector system
When you turn on the projector for the first time or after it was reset to its factory default settings, the projector system will start and prompt you to set it up by making some basic settings.
After the setup, you can start using the projector or continue to make other adjustments.
Step 1: Select the display language
Press the down or up navigation button on the remote control to select your preferred display language and press the OK button to confirm. Note: The default display language is English and not all languages are available.

8

Philips · Screeneo UL5 Smart

Step 2: Set the date and time
Press the down or up navigation button on the remote control to set the values for the date and time. Press the right or left navigation button to move to the next or previous value.
Step 3: Pair the remote control
Follow the on-screen instructions to pair the remote control with the projector.
Step 4: Set up Wi-Fi
Connect the projector to your Wi-Fi network to enjoy online content, or to use screen mirroring.
Press the button on the remote control from the home screen.
When you see the main menu, select “WiFi” and select the available network you want to connect.
You will see the home screen shown below after completing the setup.

Source Picture Sound Projector System Support

Location lnstallation 4-Corner Keystone Vertical Keystone Digital Zoom Autofocus on startup

Digital Zoom

Image focus adjustment
You can let the projector automatically adjust the image focus for you or adjust it manually.
· To automatically adjust the image focus,
press on the remote control. The projector automatically adjusts the image focus for first time usage.
· To manually adjust the image focus, press
or on the remote control.

Screen size adjustment
The projection screen size (or size of images) is determined by the distance between the lens of the projector and the projection surface.
This projector has a projection distance of 17.1 mm to 216.1 mm, and thus creates a screen size of 40″ to 80″.
Digital zooming
You can use the digital zooming function to reduce the screen size by up to 50%.
1 Press on the remote control to access the settings menu, go to Projector > Digital Zoom and press the OK button.
2 Press / to adjust the screen size. The changes take effect immediately.

Image shape adjustment
You can adjust the image shape manually. To manually adjust the image shape:
1 Press on the remote control to access the settings menu, go to 4-Corner Keystone and press the OK button.
2 Follow the on-screen instructions to adjust the image shape.
Or, you can also do the following:
1 Press on the remote control to access the settings menu, go to Vertical Keystone and press the OK button.
2 Select Manual from the list of options.
3 Follow the on-screen instructions to adjust the image shape.

9

Philips · Screeneo UL5 Smart

4 Connect to playback devices
Notice Make sure all devices are disconnected from their power supplies before establishing or changing any connections.
Connect to devices through HDMITM
You can connect a playback device (e.g. a Bluray player, gaming console, camcorder, digital camera or PC) to the projector through HDMITM connection. With this connection, images are shown on the projection screen, and audio is played on the projector.
1 Using an HDMITM cable, connect the HDMI port on the projector to an HDMITM output port on a playback device.
SSiidee

Connect to devices through USB-C
You can connect a playback device (e.g. a smart device or PC) to the projector through USB-C connection. With this connection, images are shown on the projection screen, and audio is played on the projector. 1 Using an USB-C cable, connect the USB-C port
on the projector to an USB-C output port on a playback device.
SSiiddee
PPhhoonneess
TTaabblelettss CCoommppuuters

2 If the projector does not automatically switch to the correct input source, press on the remote control to switch the input source to USB C.

PPhhoonness

SmSamratrtSSttiicckkss

TTaabblleettss CoCmomppuutteerrss

GGaammeeccoonsnosleosles DDVVDD//VVCCRR

2 If the projector does not automatically switch to the correct input source, press on the remote control to switch the input source to HDMI.

10

Philips · Screeneo UL5 Smart

Connect to devices through HDMITM ARC

The HDMI port on the projector supports Audio Return Channel (ARC). You can connect a compatible audio system (e.g. a home cinema system, AV receiver or sound bar) to the projector through HDMITM ARC connection. With this connection, audio is streamed to the connected audio system.
Tip: To get 5.1 surround sound, you typically need to connect the projector to a 5.1 home cinema system.

1 Using an HDMITM cable, connect the HDMI port on the projector to the HDMITM ARC port on a compatible audio system.
· The HDMITM ARC port on your audio
system might be labeled differently. See the documentation supplied with the device for more information.
2 If the projector does not automatically switch to the correct input source, press on the remote control to switch the input source to HDMI.

3 To activate the HDMITM ARC function on the projector, press on the remote control to access the settings menu, go to Audio Output, press the OK button and select ARC from the list of options.

Source

Sound Mode

lnternal Speaker

Picture

Output

ARC

Sound

Volume

Bluetooth Output

Projector

System

Support

Reset Settings

Connect to a dongle
You can connect a dongle (e.g. Amazon Fire Stick, Roku Stick or Chromecast) to the projector to easily watch videos over the internet. With this connection, images are shown on the projection screen, and audio is played on the projector. 1 Connect a dongle to the projector’s HDMI
port using an HDMITM cable. 2 Connect the dongle to the projector’s USB-A
port using a USB cable.
External Dongle (5V/2A) (not included)
3 If the projector does not automatically switch to the correct input source, press on the remote control to switch the input source to HDMI.

11

Philips · Screeneo UL5 Smart

5 Connect to external speakers or headphones
You can connect external speakers or headphones to the projector. With this connection, audio from the projector is played through the external speakers or headphones.
· The internal speakers of the projector are
deactivated automatically when external speakers or headphones are connected to the projector.
DANGER!
Danger of hearing damage! Before connecting the headphones, turn down the volume on the projector. Do not use the projector over a longer time at high volume ­ especially when using headphones. This could lead to hearing damage.
Bluetooth connection
The projector is equipped with Bluetooth technology, allowing you to connect to headphones or external speakers. Before you can use the projector with Bluetooth speakers or headphones for the first time, you must pair the projector with them. The projector will automatically connect to a device as soon as they are paired. Notice
Be sure that the Bluetooth device is no farther than 10 m (33 ft) from the projector when connecting the two. Even when connecting within the specified communication distance, connections can be lost due to the signal status.
1 Make sure the projector is on. 2 Turn on your Bluetooth speaker or
headphones and make sure it is in pairing mode. Press the pairing button on the device, if needed. See the documentation supplied with the device for more information. 3 Press the button on the remote control to pair the projector with the device.

· Once you press this button, the projector
enters pairing mode and displays “Searching” on the screen. Also, its power LED blinks in light blue.
· When the pairing is complete, the
projector briefly displays “Paired successfully” on the screen, as well as the name of the paired device. Also, its power LED turns solid light blue.
· If no pairing is created, the projector
will automatically exit pairing mode in 10 seconds.
Tips:
· The projector will automatically switch its
audio output to Bluetooth output after connecting to a Bluetooth device.
· After connecting a Bluetooth device, press
/ on the remote control to adjust the volume to the desired level.
Disconnect a Bluetooth device
Use one of the following methods to disconnect a Bluetooth device from the projector but leave it paired.
The projector automatically switches its audio output to internal speaker when no Bluetooth device is connected.
· Terminate the Bluetooth connection from the
Bluetooth device, or turn off the Bluetooth device. The projector will briefly display “Disconnected” on the screen.
· Turn off the projector.
Reconnect a Bluetooth device
Once you pair and connect a Bluetooth device to the projector using the steps above, the projector will automatically reconnect unless the Bluetooth device gets unpaired or turned off. The projector briefly displays “Paired successfully” on the screen after a reconnection.
Unpair a Bluetooth device
This will remove the Bluetooth device from the projector’s memory. You’ll need to pair and connect this device to use it again.
To unpair a Bluetooth device connected to the projector, select it from the list of paired devices and then press the OK button.
To unpair a Bluetooth device not connected to the projector, select it from the list of paired devices and then press the OK button twice.

12

Philips · Screeneo UL5 Smart

6 Media playback
The projector has an integrated VLC. Using this media player, you can access and play video and audio files stored in the projector’s internal memory or a USB storage device.
Notice The projector supports a USB storage device that is formatted for FAT16 or FAT32 file system.
Supported media file formats Most video and audio formats are supported, including MKV, MP4, AVI, MOV, Ogg, FLAC, TS, M2TS, WAV, AAC and MP3. How to navigate the user interface of the media player
· Use only the remote control. · Press the navigation buttons (Up, Down, Left,
Right) to move between items on the screen.
· Press the OK button to confirm or open the
selected item.
· Press to return to the previous screen or
exit the current screen.
Play videos from USB storage devices
1 Connect a USB storage device to the USB-A port on the projector.

4 Select a media file. Note: Only supported media files are displayed on the screen. All folders and files are ordered alphabetically by name.
5 Press the OK button to start playing the selected media file.
6 During the playback, press the OK button to pause the playback and bring up the control bar at the bottom of the screen. Press the OK button again to resume the playback and hide the control bar. Press / to go 10 seconds backward or forward. To adjust the volume, press / . During the playback, you can press to temporarily bring up the control bar at the bottom of the screen. You can also press to bring up the more options menu on the right of the screen. To instantly hide the control bar or the more option menu, press .
While the control bar is visible, press the navigation buttons to select an option and then press the OK button to confirm the option or change the value. To close the dialog box of an option, press . 7 To stop the playback and return to the list of files in the current folder, press .

2 Go to the projector’s home screen by pressing on the remote control and then select File
manager. 3 Select Browsing from the left navigation
pane, and then select and open the folder for the USB storage device, which is to the right of the Internal memory folder.
13

Philips · Screeneo UL5 Smart

7 Change settings
1 Press on the remote control to access the projector’s settings menu.
2 Use the navigation buttons and the OK button to select a menu item.
3 Press / or / to select a value for the menu item.
4 Press the OK button to make the change. Note: For some menu items such as Digital Zoom, the change takes effect once you select a different value.
5 Press one or more times to exit the projector’s settings menu.

Source settings
You can view and change the following source settings.

Source

lnput Source

Picture

3D Mode

Sound

EasyLink (CEC)

Projector

System

Support

· Input Source: Select the projector’s input
source.
· Philips OS: Select this to use the Philips
OS. This is the default value.
· HDMI: Select this when your device is
connected to the projector’s HDMI port.
· USB C: Select this when your device is
connected to the projector’s USB C port.
· 3D Mode: Select the input signal’s 3D format
when the input source is HDMI or USB C.
· Off: Select this when the input signal is of
2D format. This is the default value.
· Side-by-Side: Select this when the 3D
input signal is of the side by side format.
· Top/Bottom: Select this when the 3D
input signal is of the top/bottom format.
· L/R Inverted: If you have problems with
the left and right eye reversed when using 3D glasses, please adjust L/R Inverted from default OFF to ON.

· EasyLink (CEC): Turn HDMITM CEC (Consumer
Electronics Control) on or off. The default value is Enable.

Picture settings
You can view and change the following picture settings.

Source

Brightness Mode

Picture

Picture Mode

Sound

Color Temperacue

Projector

HDR Brightness

System

Brightness

Support

Contrast

· Brightness Mode: Set the brightness mode to
Normal or Bright. Tip: You can more quickly change the brightness mode by pressing
on the remote control.
· Picture Mode: Select a predefined color
brightness setting for picture and video display, or select User to customize color values on brightness, contrast, saturation, hue and sharpness. Tip: You can more quickly change the picture preset by pressing
on the remote control.
· Color Temperature: Select Warm to enhance
warm colors such as red; select Cool to make picture bluish; select Standard for a moderate color temperature; select User to customize values on red, green and blue.
· HDR Brightness: Set the brightness for high
dynamic range (HDR).
· Brightness: Adjust the display brightness. · Contrast: Adjust the display contrast. · Saturation: Adjust the video saturation of
selected primary color.
· Hue: Adjust the video hue of selected primary
color.
· Sharpness: Select different sharpness level. · Color Calibration: Adjust the gain of selected
primary color.
· Reset Settings: Reset the Picture settings to
default.

14

Philips · Screeneo UL5 Smart

Sound settings
You can view and change the following sound settings.

Source

Sound Mode

Picture

Audio Output

Sound

Volume

Projector

System

Support

Reset Settings

· Sound Mode: Select a predefined sound
effect, or select User to customize values on Bass and Treble.
· Audio Output: Select the projector’s audio
output type.
· Internal Speaker: Use the projector’s
internal speaker to output audio.
· ARC: Use an HDMITM ARC compatible
device to output audio.
· Bluetooth Output: Use the Bluetooth
devices paired with the projector to
output audio.
· Reset Settings: Reset the Sound settings to
default.

Projector settings
You can view and change the following projector settings.

Source

Location

Picture

lnstallation

Sound

4-Corner Keystone

Projector

Vertical Keystone

System

Digital Zoom

Support

Autofocus on startup

· Location: Select different projector installed
location. Each option reserves the individual setting for the following items: Installation,
4-Corner Keystone, Vertical Keystone, Digital
Zoom, Autofocus on startup.
· Installation: Adjust the projection to the
correct direction based on how the projector is installed.

· 4-Corner Keystone: Adjust projector corner
keystone.
· Vertical Keystone: Manually correct the
vertically keystone by adjusting the corners of the screen.
· Digital Zoom: Scale down the projection
image by up to 50%. The default value is 100% (no scale-down).
· Autofocus on startup: Turn this on to let the
projector automatically adjust the focus on startup. The default values is Yes.
· Reset Settings: Reset the Projector settings to
default.

System settings
You can view and change the following system settings.

Source

Language

Picture

Sleep Timer

Sound

LED Indicator

Projector

About

System

Menu Position

Support

Factory Reset

· Language: Select the display language for the
projector.
· Sleep Timer: Select a period of time after
which the projector turns off automatically. The default value is Disable.
· About:
· Hardware Version: Check hardware
version of this product.
· Software Version: Check firmware version
of this product.
· Serial Number: Check serial number of
this product.
· MAC Address: Check MAC address of this
product.
· Laser hours: Check Laser hours of this
product.
· Menu Position: Set the settings menu’s
position to Center, Top Left, Top, Top Right, Right, Bottom Right, Bottom, Bottom Left or
Left.
· Factory Reset: Restore the product to its
factory default settings. After the factory reset, the projector will restart and allow you to set it up as new.

15

Philips · Screeneo UL5 Smart

Support
Source Picture Sound Projector System Support

Get In Touch
m.me/philipsprojection youtube.com/philipsprojection philips.projector.eu@screeneo.com

16

8 Maintenance
Cleaning
DANGER!
Follow the following instructions when cleaning the projector: Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the projector. Do not spray the projector with any cleaning fluids. Wipe over the surfaces gently. Be careful that you do not scratch the surfaces.

Cleaning the lens
Use a dry cloth for cleaning the lens of the projector.
DANGER!
Do not use any liquid cleaning agents! Do not use any liquid cleaning agents for cleaning the lens, to avoid damaging the coating film on the lens.

Update firmware

The latest firmware for the projector can be found on www.philips.com/support for you to get the best features and support from the projector.
Before you update the firmware of the projector, check the current software version:
· Press on the remote control and go to
About.

Source

Language

Picture

Sleep Timer

Sound Projector System Support

LED Indicator About Menu Position Factory Reset

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Hardware Version: 1.0.0 Firmware Version: 1.0.6 Serial Number: RY2208N320A00001 MAC Address: A8:77:E5:D2:4D:35 Laser hours: 50

Philips · Screeneo UL5 Smart

CAUTION!
Do not turn off the projector or remove the USB flash drive during a software update.
OTA firmware update
1 Visit www.philips.com/support, find your product (model number: SCN355/INT), open its support page and locate “Software & drivers”.
2 Download the update package and unzip it if necessary. You should get an update file named “SCN355INT_firmware.zip”. Copy this file to the root directory of a USB flash drive. Note: Do not unzip this file.
3 Turn on the projector if it is off. 4 Connect the USB flash drive to the projector. 5 Press on the remote control to access the
settings menu, go to Firmware Upgrade and press the OK button. The projector will search for the update file. If it finds the file, you will see the Start Update dialog box. 6 Press any of the navigation buttons on the remote control to select the UPDATE button and press the OK button. 7 Wait for the update to complete. The projector will restart after the update.

17

Philips · Screeneo UL5 Smart

9 Troubleshooting

Power cycling
If a problem occurs and you cannot resolve it using the instructions in this user manual, try the following steps to resolve the problem. 1 Turn the projector off by pressing twice. 2 Wait at least 10 seconds. 3 Turn the projector on by pressing and holding for 2 seconds. 4 If the problem persists, contact one of our customer service centres or your dealer.

Problem The projector cannot be turned on. The projector cannot be turned off. No image from the external HDMITM device.
No sound from the external connected device.
No sound from external HDMITM output device. No sound when you connect your computer using an HDMITM cable. Only the home menu appears and not the image from the external device.
Only the home menu appears and not the image from the connected computer.
The projector turns itself off.
The projector cannot read the USB storage device.

Solution
· Disconnect and reconnect the power cable, and try
to turn the projector on again.
· Press and hold longer than ten seconds. If this
does not work, disconnect the power cable.
1. Check if the correct HDMITM input is selected (HDMI).
2. Disconnect the HDMITM cable or switch off the HDMITM device.
3. Wait three seconds.
4. Reconnect the HDMITM cable or switch on the HDMITM device again.
· Check the cables to the external device. · Check that the sound is activated on the external
device.
· Only the original cables from the device
manufacturer may function.
· On the HDMITM output device, set the audio setting
to Multichannel (Raw data) & Stereo (PCM).
· Check that the sound is activated on the computer.
· Check if the cables are connected to the correct
sockets.
· Check that the external device is turned on. · Check if the video output of the external device is
turned on.
· Check that the HDMITM output of the computer is
turned on.
· Check if the resolution of the computer is set to
1920*1080.
· When the projector is running for a long period of
time, the surface becomes hot.
· Check that the power cable is connected correctly. · The projector does not support the exFAT file
system.
· Format the USB storage device in FAT32 or NTFS
format, then use it.

18

Philips · Screeneo UL5 Smart

Problem The projector does not react to remote control commands. The temperature of the projector’s surface is warm. The projector does not work after I connect it to a laptop. I cannot pair the projector with a Bluetooth device.
After a Bluetooth device is connected, there is no sound from the projector or the Bluetooth device.
Black dots (dead pixels) appear on the screen.
Auto focus does not work

Solution
· Check the batteries of the remote control.
· For this projector it is normal to generate moderate
heat during operation.
· Check that the HDMITM cable is plugged in
correctly.
· Make sure that the laptop has been switched to
projector display.
· Turn on the Bluetooth device and make sure it is in
pairing mode.
· Position the Bluetooth device so that it is less than
10 m (33 ft) from the projector.
· To connect Bluetooth speakers/headphones to the
projector, make sure the projector is on.
· To connect a Bluetooth playback device to the
projector, make sure the projector is off (in standby mode).
· If another Bluetooth device is already connected to
the projector, disconnect it.
· Move the projector farther away from other
devices (microwave oven, wireless router, etc.) that are emitting radio frequency signals.
· Check if the Bluetooth device’s volume is at the
minimum.
· Check if projector’s volume is at the minimum. · Check if the playback has started. · Try playing another video/audio file. · Try reconnecting the two devices.
DMD displays from Texas Instruments typically contain a small number of pixels that do not function normally. Your display has been inspected and is in compliance with the manufacturer’s specifications, meaning that any pixel defects will not affect the operation or use of your display. Without prejudice to generality of the foregoing, a display with no more than 7 dead pixels meets the factory specifications and is not considered a defect under this warranty.
Wipe the projection lens clean with a dry cloth before turning on the projector.

19

Philips · Screeneo UL5 Smart

10 Appendixes
Technical data
Technology/optical Display technology ……………………………………….TI DLP Light source ……………………………………………..RGB laser Colorimetry & metadata …………………………..REC.709 Resolution ………………………………..1920 × 1080 pixels RGB laser lifetime…………………….. over 30,000 hours Contrast ratio ……………………………………………… 1800:1 Aspect ratio …………………………………………………….. 16:9 Throw ratio ……………………………………………………0.23:1 Screen size (diagonal) …………………………….40″ – 120″ Screen distance.. 17.1 mm – 216.1 mm/0.67″ – 8.5″ Lens protection……………………………………………………no Projection modes …………………………………………………. 4 Focus adjustment………………………….auto or manual Keystone correction ………………………………….. manual TOF ……………..yes for manual 4 corners adjustment 4 corner correction …………………………………………….yes Digital zoom…………………………………… yes (50-100%) Integrated media player ……………………………………yes
Sound Built-in speakers ………………………………………… 2 x 3 W Surround mode …………………………………………………..no Equalization ……………………………………………………….yes

Integrated Media Player Thousands of codecs supported via VLC built-in players
Dimensions and weight Unpacked (W x D x H)…………… 94 x 86.6 x 206 mm (excluding footpad) Packed (W x D x H)……………….. 152 x 323 x 171 mm Weight ……………………………………………1.05 kg/2.31 lb
Temperature requirements Operating temperature ……………………….0 °C – 40 °C Storage temperature ………………………..-20 °C – 60 °C
Package contents 1. Screeneo UL5 Smart projector 2. Remote control 3. AC adapter 4. Power cables (EU, UK, US) 5. AAA batteries for remote control 6. Quick Start Guide with Warranty Card
Model SCN355/INT EAN INT: 7640186960311 EAN APAC: 7640186960328 UPC: 667619992883

Connection HDMITM in…………………………………………………………… x 1 USB-A (5V/2A out + external drive)…………………. x 1 USB-C…………………………. x2 (1 for power; 1 for data) Bluetooth ……………………………….. Dual Bluetooth 5.0

Power source Power consumption …………………….operating: 35 W ……………………………………………………….standby: 0.25 W AC adapter………………………………………………………………. …………… Input: AC 100-240V, 50/60Hz, 1.5A (Max) …………………………………. Output: DC 20.0V, 5A, 100W

20

Philips · Screeneo UL5 Smart

CE statement
· The product shall only be connected to a USB
interface of version USB 2.0 or higher.
· Adapter shall be installed near the
equipment and shall be easily accessible.
· The operating temperature of the EUT can’t
exceed 35°C and shouldn’t be lower than 5°C.
· The plug is considered as disconnect device
of adapter.
· The UNII Band 5150-5250 MHz is for indoor
use only.
· The device complies with RF specifications
when the device is used at 20 cm from your body.
Hereby, Screeneo Innovation SA declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU.

The Declaration of Compliance can be consulted on the site www.philips.com.

Frequency bands
BT EDR (EIRP) BT BLE (EIRP) Wi-Fi 2.4GHz (EIRP) Wi-Fi 5GHZ (EIRP)

Maximum output power
9.09 dBm 4.85 dBm 17.88 dBm 17.89 dBm

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the
equipment and receiver.
· Connect the equipment into an outlet on
a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/
TV technician for help.
During operation, the separation distance between the user and the antenna shall be at least 20 cm. This separation distance will ensure that there is sufficient distance from a properly installed externally-mounted antenna to satisfy the RF exposure requirements.
FCC ID: 2ASRT-SCN355

FCC statement
15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to the user. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to user. This equipment has been tested and found to comply with the limits for a Class B digital device,

Canada regulatory compliance
This device complies with Industry Canada CAN ICES-3 (B)/NMB-3(B)
RSS-Gen & RSS-247 statement: This device complies with Industry Canada RSS standard(s).
Operation is subject to the following two conditions:
1 This device may not cause interference, and
2 This device must accept any interference, including interference that may cause undesired operation of the device.
RF Radiation Exposure statement: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS102 and users can obtain Canadian information on RF exposure and compliance.

21

Philips · Screeneo UL5 Smart

This device should be installed and operated with a minimum distance of 7.8 inches (20 centimetres) between the device and your body.
Other notice
Preservation of the environment as part of a sustainable development plan is an essential concern of Screeneo Innovation SA. The desire of Screeneo Innovation SA is to operate systems respecting the environment and consequently it has decided to integrate environmental performances in the life cycle of these products, from manufacturing to commissioning use and elimination.
Batteries: If your product contains batteries, they must be disposed of at an appropriate collection point.
Product: The crossed-out waste bin symbol on the product means that the product belongs to the family of electrical and electronic equipment. In this respect, the European regulations ask you to dispose of it selectively:
· At sales points in the event of the
purchase of similar equipment.
· At the collection points made available
to you locally (drop-off centre, selective collection, etc.). In this way you can participate in the reuse and upgrading of Electrical and Electronic Equipment Waste, which can have an effect on the environment and human health.
The paper and cardboard packaging used can be disposed of as recyclable paper. Have the plastic wrapping recycled or dispose of it in the nonrecyclable waste, depending on the requirements in your country.
Trademarks: The mentioned references in this manual are trademarks of the respective companies. The lack of the trademarks ® and TM does not justify the assumption that these dedicated terminologies are free trademarks. Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Screeneo Innovation SA disclaims any and all rights in those marks.

Neither Screeneo Innovation SA nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorised modifications, repairs, or alterations to this product, or failure to strictly comply with Screeneo Innovation SA operating and maintenance instructions. Screeneo Innovation SA shall not be liable for any damages or problems arising from the use of any options or any consumable materials other than those designated as original Screeneo Innovation SA/PHILIPS products or Screeneo Innovation SA/ PHILIPS approved products. Screeneo Innovation SA shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Screeneo Innovation SA/PHILIPS products. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Screeneo Innovation SA. The information contained herein is designed only for use with this product. Screeneo Innovation SA is not responsible for any use of this information as applied to other devices. This user manual is a document that does not represent a contract. Errors, printing errors and changes are reserved.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
This product complies with IEC 60825-1:2014 Class 1 Laser Product.

22

Philips · Screeneo UL5 Smart

As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015.
· This product complies with EN60825-
1:2014+A11:2021.
· This product complies with EN50689:2021. · This product is designed to project images on
a wall or screen.
CAUTION
· Do not look into the lens while in use. · Use of controls or adjustments or
performance of procedures other than those specified herein may result in hazardous radiation exposure.
· The use of optical instruments with this
product will increase eye hazard.
· Never allow children to stare into the
projector beam at any distance from the projector.
· Do not turn on the projector with the remote
commander while in front of the projection lens.
· Avoid the use of optical aids such as
binoculars or telescopes inside the beam.

FCC ID: 2ASRT-SCN355 Manufactured: January 2024 Rev.: XX-XXX
QAYYMMS355AXXXXX QAYYMMS355AXXXXX

Rating label Laser label

23

Philips · Screeneo UL5 Smart

Screeneo Innovation SA Route de Lully 5c – 1131 Tolochenaz – Switzerland

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Screeneo Innovation SA is the warrantor in relation to the product with which this booklet was packaged.

2024 © Screeneo Innovation SA. All rights reserved.

Screeneo UL5 Smart EN

References

• Philips - United States | Philips
• Support Home | Philips
• Philips Projection - Find help, share ideas, and get updates
• Philips Projection

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>