1642009.100 Briefwaage MAULalpha Instruction Manual

1642009.100 Briefwaage MAULalpha

Product Information

Specifications

• Power Source: Two AAA batteries (included)
• Weighing Units: Grams (g) and Ounces (oz)
• Automatic Switch-off: Approx. 2 minutes of inactivity
• Special Features: Tare function, Overload indication, Battery status indicator

Product Usage Instructions

Positioning the Scales

Ensure that the scales are placed in a horizontal position.

Weighing (ON)

1. Switch on the scales using the ON/OFF/TARE key.
2. Wait for “8888” to appear on the display and then for zero to show up.
3. Place the item to be weighed on the scales and read the weight displayed.

Net Weighing (TARE)

1. Place an empty container on the scales and press the ON/OFF/TARE key until zero appears.
2. Add the items to be weighed in the container. The display will show only the additional weight.

Switch Off (OFF)

• Press and hold the ON/OFF/TARE key until the display disappears.
• The scales will automatically switch off after about 2 minutes of inactivity.

Switching Weight Units

To change between grams (g) and ounces (oz), press the g/oz key when the scales are on. Press the key again to switch between units.

Special Symbols Explanation

• Switching on: After pressing ON/OFF/TARE, check if all symbols are displayed and zero appears.
• Negative value: Press the ON/OFF/TARE key again.
• Overload: If the weight exceeds capacity, “O-Ld” appears.
• Energy Supply: If the indicator shows a low battery, replace the batteries.

Frequently Asked Questions

Q: Can these scales be used for official metrology?

A: No, these scales cannot be used for official metrology purposes.

Operating Instructions

Battery

• Two AAA batteries are included. Insert batteries into the battery compartment in the manner indicated on the base plate. Please note the polarity marking.

Positioning the scales

• Please ensure that the scales are in a horizontal position.

Weighing (ON)

• After switching on the scales with the „ON/OFF/TARE“ key, „8888“ appears on the display. Please wait until zero appears. Then place the weight onto the scales and read off the weight.

Net weighing (TARE)

• Place an empty container (i.e. fi rst weight) onto the scales and then subtract this weight by pressing the „ON/OFFTARE“ key until zero appears. Fill the container (i.e. add a second weight to the scales). Only the additional weight is indicated in the display.

Switch off (OFF)

• Press the „ON/OFF/TARE“ key until the display disappears. Automatic switch-off will occur after approx. 2 minutes if no change of weight occurs at this time.

Switching the weight units g or oz

• The scales can show the weight value in g or oz. Press the „g/oz” key when the scales are turned on. Press the key again to change the weighing unit.

User Calibration

• If needed, the scale can be recalibrated by the user. The scale has to be switched off and no weight should be on the scale. Press the „ON/OFF/TARE“ key 5 times consecutively and hold it pressed at the last time.
• A number with or without a prefix appears on the display. Then press the „ON/OFF/TARE“ key again. The display shows „CAL”, then the size of the calibration weight.
• Place the calibration weight (200g for the 500g scale, 2000g for the 2000g scale, or 4000g for the 5000g scale). „PASS“ appears on the display, followed by the normal weight indication. The scale is now recalibrated.
• Important note: during the recalibration process, the scale may not be exposed to shocks or air currents.

Explanation of the special symbols

Switching on

• After pressing the „ON/OFF/TARE“ key all symbols appear. You can check whether all segments are clearly shown on the display. Zero indicates that the scales are ready for operation.

Negative value

• Press the „ON/OFF/TARE“- key once again.

Overload

• If the weight exceeds the total weighing capacity of the scales, „O-Ld“ appears on the display.

Energy Supply

• If appears on the display, the batteries need to be changed.
• This device complies with the requirements of EC Directive 2014/31/EU. Note: Unusual electromagnetic influences (jammers in the immediate vicinity) may affect the display value.
• After the end of the interference period, the product can be used again as intended. These scales cannot be used for official metrology.

Precision

This device corresponds to requirements stipulated in 2014/31/EU. Every scale has been carefully calibrated and controlled during the production process.
The tolerance is ± 0,5% ± 1 digit (at Temperatures between +5° and +35° C). Incorrect display values due to damage attributable to improper handling, mechanical damage, or malfunction are exempt from liability.
Damages due to faults are also exempt from the guarantee. No liability is accepted for consequential damages or losses by the buyer or the user.

• JAKOB MAUL GmbH
• Jakob-Maul-Str. 17
• 64732 Bad König
• Fon: +49 (0)6063/502-100
• Fax:+49(0)6063/502-210
• E-Mail:contact@maul.de
• www.maul.de

Documents / Resources

| MAUL 1642009.100 Briefwaage MAULalpha [pdf] Instruction Manual
1642009.100, 1642009.100 Briefwaage MAULalpha, 1642009.100 Briefwaage MAULalpha, Briefwaage MAULalpha, MAULalpha
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>