PHILIPS MasterClass InstantFit Lamps Owner’s Manual
- July 31, 2024
- Philips
Table of Contents
MasterClass
InstantFit (UL TypeA)
T8
8.9T8/MAS/48-850/IF16/P/DIM 10/1
MasterClass InstantFit Lamps
The MasterClass InstantFit T8 lamps provide hassle-free installation with simple lamp-for-lamp replacements. They deliver what we promise, with at least 40% energy savings, flicker-free performance, and the life you would expect. Other lamps claim compatibility but only MasterClass InstantFit (UL Type A) has been proven to work with over 200 ballasts and drivers, delivering even light output, with proven energy savings and a long average lifetime. End users will be delighted being under these comfortable and high quality lamps with no visible flicker and optimized optics. Energy managers will enjoy these lamps too as they can count the savings delivered by our lamps. To enjoy more energy savings, the MasterClass InstantFit lamps can be paired with the Advance TLED drivers to create a Type C system. With available 70,000 hour life, 7-year limited warranty and a shatter-prevention polycarbonate lens, Philips MasterClass InstantFit TLED lamps deliver benefits for all.
Product data
General Information
Cap-Base| G13 [Medium Bi-Pin Fluorescent]
Nominal lifetime| 70,000 hour(s)
Switching Cycle| 50,000
Lighting Technology| LED
Light Technical
Color Code| 850 [CCT of 5000K]
Beam Angle (Nom)| 180 degree(s)
Luminous Flux| 1,600 lm
Color Designation| Daylight
Luminous Efficacy (rated) (Nom)| 179 lm/W
Correlated Color Temperature (Nom)| 5000 K
Color Consistency| <5
Color rendering index (CRI)| 80
LLMF At End Of Nominal Lifetime (Nom)| 70%
Operating and Electrical
| Line Frequency | 20K to 120K Hz |
|---|---|
| Input Frequency | 20K to 120K Hz |
| Power Consumption | 8.9 W |
| Lamp Current (Max) | 300 mA |
| Lamp Current (Min) | 90 mA |
| Wattage Equivalent | 32 W |
| Starting Time (Nom) | 0.5 s |
| Warm-up time to 60% light | 0.5 s |
| Power Factor (Fraction) | 0.9 |
| Voltage (Nom) | 120-277,347 V |
| UL Type | UL Type A |
Temperature
| Ambient temperature range | -4 °F to 113 °F |
|---|---|
| T-Case Maximum (Nom) | 104 °F |
Controls and Dimming
Dimmable| Only with specific dimmers
Mechanical and Housing
Bulb Finish| Frosted
Bulb Material| Plastic
Product Length| 47-1/4 inch
Bulb Shape| T8
Approval and Application
Energy Saving Product| Yes
Approval Marks| RoHS compliance UL certificate DLC
compliance
Energy Consumption kWh/1000 h| – kWh
EU RoHS compliant| Yes
Application Conditions
can it be used in closed luminaires| Yes
Product Data
Order product name| 8.9T8/MAS/48-850/IF16/P/DIM 10/1
Full product name| 8.9T8/MAS/48-850/IF16/P/DIM 10/1
Order code| 565614
Material Nr. (12NC)| 9.29003E+11
Numerator – Quantity Per Pack| 1
Net Weight (Piece)| 0.364 lb
EAN/UPC – Product/Case| 46677565619
Numerator – Packs per outer box| 10
EAN/UPC – Case| 50046677565614
Dimensional drawing
| Product | D1 | D2 | A1 | A2 | A3 |
|---|
8.9T8/MAS/48-850/
IF16/P/DIM 10/1| 1-1/16 inch| 1-1/16 inch| 47-3/16 inch| 47-1/2 inch| 47-3/4
inch
Photometric data
General uniform lighting – 8.9T8/MAS/48-850/IF16/P/DIM 10/1
Light Distribution Diagram – 8.9T8/MAS/48-850/IF16/P/DIM 10/1
Spectral Power Distribution Colour – 8.9T8/MAS/48-850/IF16/P/DIM 10/1
Lifetime
Lumen Maintenance Diagram – 8.9T8/MAS/48-850/IF16/P/DIM 10/1
© 2023 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2023, October 26 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>