Yueying Mini Wireless WIFI Indoor IP Camera Instruction Manual

Yueying Mini Wireless WIFI Indoor IP Camera

Specifications

• Model: JFMEPGWJFXn 2
• Operating System Compatibility: Android, iOS
• Compliance: FCC Part 15
• Radiation Exposure Limits: FCC compliant for an uncontrolled environment
• Minimum Distance: 20cm between radiator and body

Product Usage Instructions

Downloading the App

• To use the product, download the corresponding app from the Google Play Store for Android devices or the App Store for iOS devices.

Installation

• Ensure that the device is installed according to the manufacturer’s instructions. Any unauthorized modifications may void the warranty and affect performance.

Operation

• Operate the device within the specified distance of 20cm from the body to comply with FCC radiation exposure limits. The device should not cause harmful interference and must accept any received interference.

FAQ

Q: How do I know if my device is compatible with the product?

A: The product is compatible with Android and iOS devices.
Ensure your device meets the minimum system requirements for the app.

Q: Can I modify the device for better performance?

A: Any changes or modifications not approved by the manufacturer could void your warranty and affect the device’s operation. It is recommended to use the device as intended by the manufacturer.

Product Appearance

Light Indicators

Quick start

Download And Add

• Search the app store for the ‘TinoSec ‘ app or use your browser to scan the QR code below to download.
• Register and use (by email, agree to the user agreement, and obtain a verification code).

Scan the QR code to go to the link:

CAUTION DO NOT use 3rd party QR code scanning tools or apps to avoid scams or malware. Use the QR code scanning app provided by your mobile phone system, e.g., the system camera app.

Add camera

There are three ways to add a camera: QR code scanning, hotspot adding, and Bluetooth adding.

Add a QR code

After clicking on the add device, select the corresponding product, enter the wifi name and password, scan the OR code that appears on the phone with the device, and the link will be successful.

Hotspot addition

Select AP mode, enter your WiFi name and password, then select AP hotspot Smartlife-XXXX, and return to the add step.

Bluetooth add mode

Open the Bluetooth on your phone, select the Bluetooth add mode, or simply add it to the Bluetooth device that pops up.

Sharing methods

Select the home menu, then select the menu bar in the upper right corner, select Single View, select the share button, enter the corresponding region and account, and click share.

Install the camera

You can place the camera on a shelf or other surfaces to use, or you can install it on a wall to use.

1. Select a good spot for your camera
   • Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network.
2. Install the bracket
   • Fix the camera to the desired location. You can directly place the camera on a flat surface or fix the bracket to the wall or ceiling by screws, and then screw the camera to the fixed base.

Product specification

FAQ

1. Q: The camera is netless or offline?
2. A: Check whether the power supply is working properly
3. Power off, restart the device, and reconnect to the network (press the reset button for no less than 3 seconds)
4. Areas with weak signal coverage
5. Signal interference shielding in special places
6. Q: How does the camera store the video
7. A: The camera supports F32 format, the maximum capacity is 128G, automatic video recording after recognition to the card, automatic overwriting of the original video, and cyclic recording after the storage is full;
8. Support the opening of a cloud storage service to store video.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiateradio frequency energy and, if not installed and used under the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>