iMars CAR Jump Starter User Manual

: June 7, 2024
: iMars

Table of Contents

iMars Car Jump Starter J03 User Manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

iMars Car Jump Starter J03 User Manual

J03

Product Overview

Function Operation

Function Operation Continued

Getting Started

Charging the jump starter:

Connect the jump starter and the power source via the USB C cable.
Short press the ON/OFF button to turn on the product. While charging the jump starter, the LED Display Screen will show the percent power increased. Once it is fully charged, the LED Display Screen will show 100%.
Unplug the cable when no charge is required.

NOTE:

When using product for the first time, please make sure that the jump starter is fully charged.
Please use the provided USB C cable to charge the product.
Wall adapter is not included in the package.

Charging your USB devices:

Connect the product and your iPhone, smart phones or other electronic devices via USB cable.
Press the ON/OFF button to turn on the product.
Unplug the cable when no charge is required.

Charging your USB devices

Wireless Charging your device:

Press the power button once to enable wireless charging function. Place the device on top of wireless charging icon to start. You may need to adjust the orientation to have the best charging.

NOTE: The wireless charging feature only works on devices that allow Qi (inductive) wireless charging. Only use the wireless charging pad with Qi- certified devices.

LED flashlight

Long press ON/OFF button for 3 seconds to turn on the light. Press ON/OFF button shortly to switch modes among Solid, SOS, Alert and Off.

Jump start your car

NOTE:

This product is for 12V car (up to 6.0L petrol or 4.0L diesel engine) only.
Check to make sure that battery level is above 50% before you use it to jump start your car.

Step 1: Insert the plug of the smart battery clamp completely into the jump starter. If the green and red light indicators on the battery clamp are flashing alternately, you are safe to move on to to the next step.

Step 2: Connect the red clamp to the positive terminal (+) of the car battery and connect the black clamp to the negative terminal (-) of the car battery. If the green and red light indicators on the battery clamp are flashing alternately, you are safe to move on to to the next step.

However, if the red indicator light is on:

The battery clamp may be connected in reverse. If so, you need to disconnect the battery clamp from the vehicle and the jump starter.
Adjust the clamps for maximum contact with battery terminals.

Step 3-a: Start your car.

If you failed to start your car, you need to disconnect the battery clamp from the vehicle and the jump starter. Wait for at least 30 seconds, then try again.
If you failed to start your car after 3 attempts, you can use the force start function. See step 3-b.

Step 3-b (optional): Force start function. First please make sure that the clamps are connected to the correct polarity battery terminal. Then, hold the force start button for 3 seconds to start your car. When the indicator light of the smart clamp is solid green, you need to start the vehicle within 30s.

Step 4: Once your car is started, remove the battery clamp from the car battery and the jump starter within 30 seconds.

If any of the following situations, the smart clamp turns protection on.

LED Indicator Situations

Cautions

Use the original smart battery clamp to start the car.
Do not use this unit if any cable clamp or cord is damaged.
Do not connect two clamps together when the product is turned on.

Do not connect both cable clamps to the same piece of metal. Otherwise, the jump starter will be damaged.

Care and Maintenance

DO NOT use the product to start a bulging car battery.
Store the product in a shaded, well-ventilated area.
Please handle the product with care and do not abuse it. Avoid dropping or striking the product heavily and repeatedly.
DO NOT disassemble or modify the product.
DO NOT use detergents to clean the product.
DO NOT place the products in a high-temperature environment for long. The operating temperature of this product is -20-60℃. The storage temperature of the product should not exceed 50℃/122℉.
Check the battery level of the product at least once every three months and charge the product in time. 8. Keep the product away from children and pets.

Specifications

FAQ

Q: How to turn off the product?

A: This product will power off automatically when no load is detected or when charging is complete.

Q: How long does it take to fully charge the jump starter?

A: About 5 hours through the Micro USB input port or Type C input port.

Q: How many times can this product start the vehicle with full capacity?

A: About 15 times.

Q: How many times can this product fully charge my cell phone?

A: It depends on the battery capacity of your cell phone. For example, iPhone 8 can be fully charged 3~4 times.

Q: What are the safety protections of the smart battery clamp?

A: Short-circuit protection, over-temperature protection, low Voltage Protection, over-voltage protection, over-charge protection, over-discharge protection, over-current protection and reverse polarity protection.