Stealthcam 2A5AN-PH930G Fusion Global Cellular Trail Camera Instruction Manual

Stealthcam 2A5AN-PH930G Fusion Global Cellular Trail Camera

Product Information

Specifications

• Power Supply: 8 x 1.5V AA Alkaline or 1.5V Lithium batteries
• Memory Card: Micro SDXC/SDHC (max capacity 128GB, Class 10)
• Connectivity: 4G
• Camera Features: Infrared LEDs, PIR motion sensor, LCD screen, intelligent night vision

Product Usage Instructions

Setting Up the Camera

1. Ensure SIM card is mounted properly and do not use other SIM cards if there is a pre-installed one.
2. Insert a memory card (TF card or SD card based on the model).
3. If the antenna is not pre-installed, screw it tightly.
4. Install 8 x 1.5V AA Alkaline or 1.5V Lithium batteries.
5. Toggle the switch to SETUP mode and wait for network connection success according to the 4G status icon.
6. If the 4G status icon is not visible, turn on cellular network on the camera’s setting menu by pressing the MENU key.
7. Touch Bind Application on the camera setting menu to scan the generated QR code for setup.

Important Notes

• About Batteries: Use recommended batteries for optimal performance and battery life. Remove batteries when not in use.
• About SD Card: Use a standard-size micro SDXC/SDHC memory card. Format the SD card in the camera before use.
• About APP 4G Connection: Ensure the camera is installed within 4G signal coverage for better performance.

Frequently Asked Questions (FAQ)

• Q: What type of batteries should I use with the camera?
  A: It is recommended to use eight (8) 1.5V AA Alkaline or 1.5V Lithium batteries for optimal performance. Avoid mixing old and new batteries, and do not mix battery types.

• Q: What is the maximum capacity for the memory card supported by the camera?
  A: The camera supports a maximum capacity of 128GB for micro SDXC/SDHC memory cards with Class 10 rating.

• Q: How can I ensure successful 4G connectivity with the camera?
  A: To ensure successful 4G connectivity, make sure the camera is installed within the range of 4G signal coverage. Poor signal strength may lead to image transfer failures or increased power consumption.

Before using the 4G functionality, please download the ‘TrailCam Go’ APP.

TO ADD A CAMERA

• Step 1: Check if SiM card is mounted properly,DO NOT use other SlM cards if already has a pre-installed one, otherwise setup may fail.
• Step 2: Mount memory card(TF card or SD card according to different models)Step 3: Screw the antenna tightly if not-installed
• Step 4: install batteries( 8 1.5V AA Alkaline or 1.5V Lithium batteries)
• Step 5: Toggle the swith to SETUP mode,wait for network connection success according to the 4G status icon
• Step 6: Touch “Bind Application” on the camera setting menu to enter the QR code scanning page, then touch the”Next” button on the camera lens to scan the generated QR code, and adjust the distance to 15-25 CM until the scanning is successful.

PACKAGE CONTENTS

1. 1x 4G trail camera
2. 1x Type-C Cable
3. 1x Stand Mount & Stand Support & 3x Bolts & Stoppers
4. 1x Installation Belt
5. 1x User Guide
6. 1x 4G antenna

PRODUCT DIAGRAM

1. Lens
2. Infrared LEDs
3. PIR motion sensor
4. LCD screen
5. Menu button
6. Replay button
7. Navigation buttons
8. Shot button
9. OK button
10. Micro SD card
11. Type-C slot
12. Mode switch
13. Fixaton port
14. Power supply port
15. Battery holder cover

IMPORTANT NOTE

About Batteries

• Require eight (8) 1.5V AA Alkaline or 1.5V Lithium batteries.
• We recommend the use of Energizer AA Lithium batteries in this camera to obtain maximum battery life.
• Do not mix old and new batteries.
• Do not mix battery type.
• Rechargeable NiMH AA batteries can be used, but are NOT recommended as the lower voltage (generally 1.2V) they produce can cause night recording issues, and you also may have to replace them frequently.
• Remove batteries when the camera is NOT in use.

About SD Card

• Require a standard-size micro SDXC/SDHC memory card (max capacity 128GB, Class 10).
• Before use, please format your SD card in the camera in case your SD card may not work with your camera.
• Please gently remove the protective films on the front of the camera to get the best performance, especially the protective films attached to the PIR motion sensor may cause promotion detection performance, even no capture.

About APP 4G Connection
To get better performance, the camera must be installed in the range of 4G signal coverage, such as poor signal will lead to the failure to transfer image files, or the machine will increase power consumption due to prolonged connection time.
Note: Check the signal strength through the camera interface.

INTRODUCTION

About the Camera

• This is a new generation of 4G tracking cameras. This camera has built-in 4G.
• Module, so you can set up the camera remotely over the network Specialized applications ( “TrailCam Go” “).
• For viewing camera cloud pictures and recordings camera uses new innovative and ultra-clear imaging technology. This camera uses new innovative and ultra-clear imaging technology.
• Includes intelligent night vision, blur removal, and 3D noise reduction
• Technology that provides high-resolution image quality.

Main Features

• Low-power 4G camera, support for smaller packages, actual large number of pictures and small videos (5S) upload
• Receive pictures and videos from the camera remotely in real-time through the 4G function
• High quality pictures (48MP still photos), 2.7K 30fps or 1296p 30fps video clips
• Audio acquisition with high sensitivity ambient sound level
• Clear night vision, flash range of 65 feet, camera equipped with 28 high
• Performance Infrared glow-free 850nm or 940nm LEDs for use as flash lamps (not visible
• Human and animal eyes)
• Wide viewing angle -100 °
• Easy to use/program, with well-designed operation buttons and built-in 2-in.
• Color screen, easy to program, view pictures and videos on screen
• Two modes of operation-motion detection and delay
• Fast trigger time-about 0.2S, fast recovery time-0.2S, long trigger distance
• Up to 65 feet, detection angle -100 °
• Each captured message: date, time, temperature, moon phase
• Running time, cycle logging, time delay, password protection
• Suitable for all climates-IP66, operating temperature: -4 ~ 140 ° F
  • Supports SD/SDHC/SDXC memory cards up to 128GB
  • Extremely long field battery life, up to 8 months in standby mode
• AA 1.5V battery (provided by user)

PARTS AND CONTROLS
The camera is equipped with 28pcs high-efficiency infrared LED, LED Indicators, Lenses, and PIR Sensors.
TIP: During use, if the black PIR Lens is dirty, it does not affect the performance. If you must clean it, please try to blow it off or pick out the dirt very lightly. Do not try to wipe it, which may cause more scratches. Due to the reliability design of the PIR lens, scratches do not reduce the PIR detection performance.

CAMERA OPERATION

Power/ Mode switch has 3 operational modes: “OFF”, “ON”, and “TEST”.

2. insert an Micro SD card

3. connect to an external device or a power

“ON” Mode| 1. Display the mode you set and count down to 10 Seconds and start working.

2.  According to the setting of the camera, PIR triggers or regularly uploads pictures/videos to the cloud server, which can be viewed through the mobile phone.

3.  Can be connected to the mobile phone for camera settings.

“TEST” Mode| 1. Set up the camera

2. Manual shooting

-Press the up key and then press SHOT to record Video.

-Press the down key and then press Shot To Photo.

3. Connect the computer to view pictures and videos

4. Connect the mobile phone to set the camera.

Note: In “TEST” mode, the camera cannot automatically take pictures and videos.It needs to be in the The “ON” mode works and uploads photos and videos.

ADVANCED SETTINGS

Off

| Turn on the 4G function, which will increase the battery power consumption. The photo upload time is about 30 seconds. (In the case of good signal),
| | the video recording time will increase accordingly.When the battery drops to a very low voltage, it will stop the night working mode and keep the day working mode.
---|---|---
Cellular Info| Moden:xxxxxxxxxxxxxxx ICDID:xxxxxxxxxxxxxxx

IMSI:xxxxxxxxxxxxx

| 4G module information SIM card number
Bind APP| Scan QR code on APP| Scan the QR code of the mobile phone to add the camera. After successful addition, the menu APP for setting the camera will also change correspondingly. It will automatically upload photos and videos only in the “ON” mode.
Mode| Motion Detection;

Time lapse normal;

| In Motion Detection mode, the camera will take photos or videos once triggered. In Time lapse normal mode, the camera will take photos, in Time lapse mode will take videos, periodically according to your preset “Time lapse Interval” parameter
Photo or Video| Photo, Video,| Select whether still photos or video clips are taken.
Photo Quality| 48M, 42M, 36M, 32MP,

24MP,

20MP, 16MP, 8MP,

4MP, 2MP

| Select the desired rest resolution Photo. Higher resolution result Higher quality photos, but creating Larger files that take up more SD Card capacity. Larger files require It takes a long time to write to the SD card, This will slow down the shutter speed slightly Speed.

Note: 16m 20m 24m 32m 36m 42m 48m will not be available after 4G is turned on

Photo Burst| 01, 02, 03| Select the number of photos taken in sequence per trigger.
Video resolution| 2.7K

1080P

720P

| Select video resolution (per pixel Frame).Higher resolution result Higher quality video, but creates Larger files that take up more SD Card capacity.

Note: Under the 4G function, the video with smaller resolution of 5S is uploaded by default, and the HD video supports the video with a maximum duration of 30s.

Video Length| 10 seconds, Optional from 5s to 10m| Select video recording length. Note: It is highly recommended to set the night video length to less than 30 seconds as the IR LEDs will consume more battery power.
Audio Recording| On

Off

| Selecting On will record video with sound.
Detection Delay| 30 seconds, optional from 5s to 60m| Select the shortest length of time that the camera will wait until it responds to any subsequent triggers from the PIR sensor after a game is first detected. During the selected interval, the camera will not take pictures/videos. This prevents the SD card from filling up with too many redundant images. 0 means capture as fast as possible.
Note: This option is invalid if the Mode is set as “Time Lapse”.
---|---|---
PIR Sensitivity| High, Medium, Low| Select the sensitivity of the PIR sensor. Temperature affects sensitivity. The High setting is suitable when the ambient tempera ture is warm or you want to capture distant objects or capture more, and the Medium/Low setting is helpful in cold weather. Note: this option is invalid if the Mode is set as “Time Lapse”
Motion Test| | This feature helps you aim the camera at your target area.
Loop Record| On

Off

| Selecting the On option will cause the oldest files to be overwritten with new captures when the SD card reaches its capacity. With the Off option selected, the camera will stop capturing images once the SD card reaches capacity.
Password| On

Off

| Set up a 4-digit password to protect your camera from unauthorized users. If the code is lost, you can contact customer support to reset the password.
Format SD Card| On

Off

| All files will be deleted after formatting the SD card. It’s highly recommended that you format the SD card if it has been used previously on other devices.

Caution: make sure the wanted files on the SD card have been backed up first!

Factory Reset| On

Off

| Selecting Yes will return all your previous settings back to the manufacturer’s default.

INSTALLATION

If you want to put the camera on the wall.

1. Mark the installation position with the help of the metal plate and make holes in the wall.
2. Put the white components in the holes.
3. Fix the Fixation Kit by following the picture.
4. Put the camera at the position you have chosen and fix the camera with screws.

If you want to put the camera on a tree.

1. Pass the Installation Belt through the support on the back of the camera. If the Belt is too long for the tree which you choose, there are 3 holes on each side the support, you could pass the Installation Belt through several holes to shorten the belt.
2. Put the camera on the bottom of the tree.
3. Go to the other side of the tree, pass the belt through the buckles by following the picture.
4. Adjust the position of the camera then tightens the belt.
5. If you afraid that the camera would fall, you could also use the Fixation Kit and the Installation Belt together to make sure that the camera is sturdily fixed on the right position.

PRECAUTIONS FOR USE

Please read all safety notes and helpful tips before using the camera

Safety Notes

1. The device is only designed for wildlife observation, hunting, and security monitoring. Do not use it for any other purpose.
2. Do not immerse the camera into water.
3. Do not disassemble the camera, please feel free to contact our customer service for help.
4. Do not use the different type of power source, it may result in fire or electric shock.
5. Always switch off the camera and remove the batteries after use.
6. Always disconnect the power supply during a thunderstorm/lightning.
7. Never subject the LCD display to heavy shocks, it may damage the screen and cause liquid leaking from inside. In case of contact with eyes or skin, rinse with plenty of water ASAP and seek immediate medical attention.

Helpful Tips

1. Place the device on an even surface or a stable stand. If you want to mount the camera on a tree trunk, install it using the premium-quality mounting hardware/ strap designed for this camera.
2. Operate the camera in a well-ventilated area.
3. To prevent damage, never subject the camera to heavy shocks and do not shake or drop it.
4. The device is not intended for use by children. Keep out of the reach of children.

Note:

1. Switch off the camera before inserting or removing the Micro SD Card. Do not insert or remove the SD card when the power switch is in the “ON” position.
2. Camera only operates after installing a Micro SD Card.

FAQs

If your camera does not seem to be functioning properly or if you are having photo/video quality issues, please check if you are using the latest firmware or app (the app is only applicable for the 4G model), and check the Troubleshooting/FAQ section.

What type of batteries should I use with the camera?

It is recommended to use eight (8) 1.5V AA Alkaline or 1.5V Lithium batteries for optimal performance. Avoid mixing old and new batteries, and do not mix battery types.

What is the maximum capacity for the memory card supported by the camera?

The camera supports a maximum capacity of 128GB for micro SDXC/SDHC memory cards with Class 10 rating.

How can I ensure successful 4G connectivity with the camera?

To ensure successful 4G connectivity, make sure the camera is installed within the range of 4G signal coverage. Poor signal strength may lead to image transfer failures or increased power consumption.

Camera won't power up

Forget your password? How to reset the password?

The camera takes great daytime pictures, but nighttime pictures are all black.

The camera takes continuous images of no subject?

Battery life is shorter than expected?

Battery life varies depending on operating temperature and number of images captured Cameras are often able to capture thousands of images over time. Before the battery dies. 4G video recording will consume a lot of power, please try to use the camera mode, you can add 6-V power supply, solar power supply or external power supply. Check to make sure you are using a new battery. We recommend using eight good All cameras are equipped with premium AA 1.5V lithium batteries that provide maximum battery life. Please make sure that you are using a high quality, name-brand SD card in your camera. Our experience has shown that inferior SD cards can sometimes lower your Camera battery life.

The camera displays no signal?

1. Cameras with bound cards do not support the use of self-inserted cards. 2. Need to be used within the coverage of 4G signal. Confirm whether the card is within the valid range. The SIM card of the camera is valid for 1 year. 3. Restart the machine or try to replace the new battery.

TECHNICAL SPECIFICATIONS

at Night
Auto Power Off| Yes , After 2 Minutes of No Operation
TV-Out| Yes
PC Interface| TYPE C USB 2.0
Power Supply| 8X 1 5V AA Batteries; 6V,1.5-2A DC External
Waterproof Rating| IP66
Operating Temperature| -20°C to 60°C (-4°F to 140°F)
Dimensions| -20°C to 60°C (-4°F to 140°F)

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>