ENZO Undermount Granite Pyragranite Sinκs User Manual
- June 6, 2024
- ENZO
Table of Contents
ENZO Undermount Granite Pyragranite Sinκs
YOU WILL NEED
- Liquid silicone
- Glue
- Hand screwdriver
- Cutting tools appropriate for the work top material
- Gloves
- Eye and ear protection
- Drill with wood and a cylindrical bit / hole saw
- Template (included)
- Fixing clips (included)
- Drill with 8mm bits & stops for fixed bore depth
SINK INSTALLATION
We
recommend that the sink be installed by a professional plumber.
Step 1 Choose and cut out of the template the drawing that corresponds to your sink. Place the template on the worktop in the exact place where you would like to install your sink and trace the outline of the template with a pencil. Make sure it does not obstruct cupboard doors or other installations (taps, pipes etc.) and check openings for these before installing the sink.
Step 2 Cut the worktop according to the template outline then grind or sandpaper the surface of the aperture to make it smooth. Always use the template as a guide.
Step 3 Reverse the worktop and place the sink on the side you are facing. Place the fixing clips on the outer rim and make pencil marks in the middle of the opening of the hook. The holes should have a depth of 8mm.
Step 4 Apply adhesive of a suitable type for your worktop material (marble, granite etc.) to each hole and then insert the hex screws. Wait until the glue has dried completely before proceeding. Apply a thick layer of silicon around the bottom edge of the opening in the worktop at the point of contact with the sink.
Step 5 Centre the sink in the aperture and tighten the hooks. Tighten the screws with a hand screwdriver because the pressure of an electric screwdriver might throw the sink out of line.
Step 6 Restore the worktop to its initial position for the final installation. Fill any remaining gaps between the counter and sink with silicone. Use a damp cloth to remove excess silicone along the joint between the sink and worktop.
DRAIN CONNECTION
Follow the instructions included in the valve and siphon packaging.
SINK CARE & USE INSTRUCTIONS
• Do not place pots, pans or other objects with excessive temperatures on the
sink.
• Place hot objects on appropriate potholders (sus plat) made of wood, plastic
etc.
• Let cold water run when you pour boiling water in the sink.
Avoid placing simultaneously on the sink very hot or very cold objects.Do not
use your sink as a cutting surface. Wood or plastic cutting boards are
available. The purchase of stainless steel baskets or other accessories can
reduce the risk of accidental damage.
Do not use abrasive or metal cleaning pads to clean the sink, because they
could scratch the surface and make it susceptible to stains.
• Do not throw heavy or pointed objects on the sink because they may damage
it.
• ATTENTION! Do not pour alcohol, gasoline, chlorine, or other diluents in
the sink because they can damage it beyond repair.
CLEANING INSTRUCTIONS
- Clean your sink after every use with hot water, a plain soapy de-tergent and a soft cloth. Common stains are removed immediately.
- Common stains caused by foods or liquid which stain easily (tea, coffee, juice etc.), must be removed immediately using very hot wa-ter and a cleaning product.
- Difficult stains, such as ink, oil, or paint must be removed immedi-ately using a cloth dampened in denatured alcohol.
- Abrasive cleaning powders, creams or dangerous chemical prod-ucts must not be used.
- Everyday use will result in lime buildup, especially on the bottom of the sink, which will progressively increase in thickness. This layer of lime buildup is very porous and easily stained. By following a cer-tain procedure you can remove any buildup twice a week, easily:
- Cover the bottom of the sink with water and plain vinegar (or a specifically designed product fighting lime buildup), and let it soak for a few hours.
- Rub strongly with the hard side of a sponge until the lime, dirt and any stains are removed.
- Rinse thoroughly with water.
GUARANTEE
Our company offers a Lifetime Guarantee of all manufacturing defects in
material and workmanship under normal residential usage.
We will issue an equivalent replacement sink without charge, excluding
transportation and any labor costs, provided that the product has been
installed in accordance to the installation instructions, used and cleaned as
recommended and not damaged due to abuse, misuse or negligence. In the event
of a warranty claim, the owner will be required to provide as proof of
purchase, a sales receipt.
Manufacturing defects covered by this guarantee:
- Thermal cracking
- Inconsistent color
- Surface blemishes
- Bubbling
- Warped surface
Guarantee is not applicable under conditions:
- Improper installation or modification of original product
- Holes drilled incorrectly
- Cuts and nicks
- Abuse or misuse (i.e. impact damage due to heavy objects dropped into the sink, hot pots exceeding 200°C placed into the sink)
- Scratches resulting from scrubbing with steel wool, abrasive pads or cleaners
- Improper application such as exposure to corrosive chemicals
- Shipping or freight damage
- Any commercial application
This guarantee does not allow recovery of any indirect, incidental, special or
consequential damages in any way related to this product.
This guarantee is extended only to the original consumer purchaser of the
product.
Our company reserves the right to inspect any sink prior to replacement.
In order to obtain service under guarantee, a written notification must
include the following information:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>