Shenzhen Yueying Industry 2BAL5-YY-B03 Smart IP Camera User Manual

Shenzhen Yueying Industry 2BAL5-YY-B03 Smart IP Camera

Product Information

• Product Name: PROY Camera
• Accessories included: Camera, Power Adapter, Screw Pack, Instructions
• Package Contents: Color Box, Packing List
• Product Size: 16.5 x 15 x 13 cm
• Supported Networks: 2.4G wifi

Product Usage Instructions

1. Upon receipt of the item, please check whether the accessories are complete.
2. Install the camera according to the size and location of the product, as shown in the figure provided in the instructions.
3. Download the PROY Camera app via QR code or search for it through app markets such as APP STORE.
4. Register and connect the device through the app. Please select a 2.4G wifi network for connection.
5. Wait for the completion of the distribution network and start using the camera through the app interface function.
6. Refer to the Q&A section in the instructions for any further queries or issues.

Caution:

Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Use manual

1. Upon receipt of the item, please check whether the accessories are complete ( camera power adapter screw pack instructions)

2. Please install according to the size and location of the product, as shown in the figure

3. After installation, please download via QR code or search for PROY Camera downloads through app markets such as APP STORE.

4. “After installing PROY, you need to register and connect the device. Currently, this device only supports 2.4G wifi networks. Please pay attention to selecting a 2.4G wifi network for connection, and you can use it after connecting.”

5. Introduction to Machine Functions

6. Register and Login and Connect
   Register and LoginConnect and Adding a camera（Chose 2.4G wifi） Attention points
   The QR code appearing on the mobile phone is scanned against the camera, and the device sends out “QR code scanning successfully” or “WiFi connection successfully”. Check “the prompt tone has been heard”, click the next step and wait for the completion of the distribution network.

7. Introduction to APP Interface Function

8. Q &A
   Q: The camera is netless or offline
   1. Check whether the power supply is working properly
   2. Power off, restart the device and reconnect to the network (press the reset button for no less than 3 seconds)
   3. Areas with weak signal coverage
   4. Signal interference shielding in special places
   Q: How does the camera store the video
   1. The camera supports F32 format, the maximum capacity is 128G, automatic video recording after recognition to the card, automatic overwriting the original video and cyclic recording after the storage is full;
   2. Support the opening of cloud storage service to store video.

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>