FILA Connected TalkFit Smart Watch User Manual

FILA TalkFit
USER MANUAL
MANUAL DE USUAR

Connected TalkFit Smart Watch

Thank you for using our smart watch.
Important! The data provided by the smart watch, such as heart rate, blood oxygen and blood pressure, are merely indicative, it is not an exact medical measuring device.
Even if you are well, go to all the appointments scheduled by your doctor.

Recommendations for people with sensitive skin during use of electronic wrist devices, Smartwatch and Smart band.
The materials used for our Smartwatches and Smart bands are selected following a rigorous control of hypoallergenic measures, as well as guaranteeing that all materials comply with current regulations for materials in contact with the skin A small number of people, however, may experience some type of skin reaction.
If you suspect, or know, that you are allergic or have an above average sensitive skin type, you should monitor the use of these devices for any type of reaction due to said allergies, environmental factors or prolonged exposure to irritants, like soap, sweat, or other causes.
Smartwatches and Smart bands may contain materials such as nickel and acylates which, even though they are within the permitted amounts in the manufacturing process, may cause skin to react if you are sensitive to them.
If you use these devices for a prolonged period of time, you may be more susceptible to developing skin sensitivities. To avoid possible skin irritations we recommend you do not expose the device to chemicals or use it if your skin has, or has been recently applied with, any of the products listed below:

• Insect repellents
• Moisturizing creams and lotions
• 0is
• Perfumes
• Antiseptic gels
• Soaps
• Sun protection creams

It is recommended that the devices are used when the skin is completely dry and free of any of the aforementioned products to avoid having charging contacts and measurement sensors in contact with wet skin. They are not submersible or waterproof.
Clean the device thoroughly to remove sweat after training and allow it to dry. Prolonged exposure to moisture can cause skin irritations.
Itis also advisable not to wear these devices too tight or too loose.
If the strap is too tight, it may cause skin irritation. If the strap is 100 loose, chafing may ocours.
The watch strap should be left so that it can move slightly back and forth on the wrist
If you wear the device for prolonged periods of time, remove it to give your skin a rest. To avoid invitation, swap the device to your other wrist.
If you notice redness, swelling, itching or any other irrtation, remove the Smartwatch immediately and consult your physician before using the device again.

Special attention must be paid to the use of these devices in places with relatively low humidity conditions.
When using the Smartwatch/Smart band in places with low relative humidity (dry/poorly ventilated places, low humidity atmospheric conditions, dry indoors, if heating or air conditioning is always on, etc.), as with any other electronic device, it may be affected by charges of static electricity on rare but certain occasions. This may cause damage to the device and also to the person wearing it at that time. Static electricity is everywhere.
It surrounds us without us perceiving it.
An effective trick to avoid a high percentage of static electricity at home:

• Use a humidifier. Humidity is a good conductor of electricity therefore, by maintaining an acceptable percentage of it, we will avoid static in areas of the home where we metal objects may be found. Small containers of water on top of radiators is another alternative solution.

The use of the devices in bed, whilst sleeping, is especially discouraged for children and the elderly due to the fact that repeated movements during the night may cause, through friction with sheets, blankets, etc.
a swap the device to your other wrist.
If you notice redness, swelling, itching or any other irrtation, remove the Smartwatch immediately and consult your physician before using the device again.
Charge of static electricity. This may result in a sudden discharge of the watch’s battery and/or heating of same as the human body is a conductive element and can cause reaction to people with sensitive skin, redness, irritation, etc.
If you notice redness, swelling, itching, or any other form of irritation, remove the Smartwatch immediately and consult your physician before using the device again in case you are suffering from any type of reaction, allergic or otherwise.
Welcome to use our high-performance wrist smart watch which creates thoughtful and health experience for you Device maintenance

Please remember the following tips when you maintain your smart flea watch:

• Clean the smart watch regularly, especial its inner side, and keep it dry.
• Adjust the smart watch tightness to ensure air circulation.
• Excessive skincare product should not be used for the wrist wearing the smart watch.
• Please cease wearing the smart watch in case of skin allergy or any discomfort.

Getting started Charging the battery

The Filialities equipped with a rechargeable Lithium-Polymer battery.
Fully charger the FILATaIFit prior to putting the device into operation for the first time. To charge, place the fitness watch with the charging contacts on the charging unit so that the pins of both units are magnetically attracted and have contact.
The charging unit can be connected with any USB-A port of a computer.
Connect the USB cable to a USB power source, the battery symbol will show up and the battery will be charged.
The usual charging time s 2.5 hours.
The display will indicate, one the battery is fully charged.

Downloading and binding of smart watch APP

Note: your mobile phone must support Android 4.4, i0S 8.0 or above, and Bluetooth 5.1

1. Download from Apple Store or Google play and install APP or scan QR code with mobile phone to download APP. https://app.moyoung.com/app-download/filas-watch
   APP / APK: FILA S-WATCH
   

2. Pairing smart watch with APP: Please do not pair the watch directly 1o your phone’s Bluetooth.

If you have alreadly performed this operation, please remove it from the list of paired devices as it will prevent the connection to the APP..1. Open the APP
2.2. Update your personal details (gender, birth year, etc.) and press the check mark
Once done, grant all permissions requested by the APP.
2.3. To link the watch to your phone press “To Add”
2.4. The phone will search, and display, FILA TalkFit
Select it to pair the watch to your phone.
Once synchronization i complete your watch wil display local date and time.
2.5. When you press the watch icon (bottom mididle) you will see the following screen Here you can set up notifications, alarms and the background image (can be personalized)
In “Others” you can establish time format (12/24 hours), reminders, etc.

2.6. The last icon, on the lower right, will show “Me” screen. Here you can complete the details of your profile and establish your objectives.

Notes: Only connect the device via APP and not via the Bluetooth setting of the smartphone.

• The personal data is used to calculate the calorie consumption and distance correctly
• You can only connect one watch via APP. The use of multiple watches with one smartphone at the same time is not supported
• After successful connection, the data, time and weather data are transferred from the smartphone to the watch.
• Time / date cannot be set manually.

Mobile phone connection (For calls)
If you did a correct connexion with the APP, a pop up show in the screen that you have to confirm for connect the the smart watch to the Phone so you can make and reject calls, answer calls and Speak from the watch.

Introduction to the call function

When your watch is connected to your phone, you can use your watch to dial- control your phone to make calls, or you can answer calls from your phone on your watch

Notes:
If you don’t want phone calls or media audio occurred in your watch, you can switch off from below menu: Setting—phone.

You can also view your watch’s call history.
When using the call function, you need to make sure that your watch is connected to your phone in a stable state.
For using this function please ciick in the icon telephone from the menu
Functions
Smart watch features
Sleep : If you keep wearing Smart Watch in your sleep, it can provide the hours slept and quality of sleep stats on both the screen and the APP.
Note: Sleep stats reset to zero at 8:00 pm
Heart Rate test: The Smart Watch could record your heart rate al day.
You also could tap on the page to start measuring heart rate.
Sport: Smart watch automatically tracks steps taken on the screen
Note: Your movement stats reset to zero at midnight
Training: Tap the training icon on the menu to start a new training measure recording, there are 8 sport modes to be chosen.
The last training recording will be shown on training page.
Blood pressure test: Tap on the blood pressure page to start measuring your blood pressure.
On the blood pressure page, it can show the blood pressure measured data of the last time.
SpO2 Test: Tap the SpO2 page to start measuring your SpO2.
On the SpO2 page, it can show the SpO2 measured data of the last times.
Weather: It could show the weather info of current and tomorrow on the weather page.
Weather info is synced after connecting with the APP, it not be updated after a long disconnected.
Messages reminder: The device can sync incoming notifications from Titter, Facebook, Whatsapp, Instagram, etc.
Recently 5 messages can be stored
Note: You can switch on/off the incoming notification in the APP.
Remote Shutter: After connecting the device, you can remote control the camera on your phone.
Player Shutter: After connecting the device, you can remote control the music player on your phone.
Other features: Other features include stopwatch, alarm, timer, brightness, mute on/off, theater mode, factory reset, power on/off and about.
Stop Watch: Tap the start button on stopwatch page to start timing, and tap the stop button to stop timing.
Silent alarms: Set up the alarm on the APP, the device will vibrate to remind on time
Theater mode: The device will turn off the vibration and trun down the brightness when the theater mode is truned on.
Note : You can trun on/off the theater mode in the control center.
Remind to move: The device will vibrate to remind you to make a relax after 1 hour sitting
Note : you can switch on/off the feature in the APP.
Specifications
BT 5.3/ Heart rate / Blood pressure / Blood oxygen / Bluetooth calls /Step / Calories /Sedentary reminder / Sleep / Remote camera / Alarm / Music control / Sports modes / Notifications / Screen1.43 Amoled / Battery 230 mAh / BT frequency band: 2.4 GHz / Maximum emitted RF power < 100 mW

Guarantee

DEVICE
TTEM:………..
Serial number:…………
ESTABLISHMENT
Purchase date:……………….

Establishment signature……………..

NOTE : The Smart Watch FILA TalkFit has a 1-year warranty from the date of purchase. Special importance in the durability of the products have the elements that compose it and that suffer from degradation and loss of capacities due to their use, being understood as normal wear that they lose capacity, especially in the case of rechargeable batteries, depending largely on infinity of external factors (hours of use, charge and discharge cycles, use of inappropriate chargers, temperatures of use, not respecting the recommended charging times, etc…) For the guarantee of wear and tear parts, it must be taken into account that the loss of autonomy of the battery as a result of its aging does not imply a  manufacturing defect, so itis considered normal that after 6 months have a loss of 10%, at 15 months 20% – 30% at 24 months 45%, all corresponding to proper Use of the battery and the charge and discharge cycles carried out Any battery that presents symptoms other than those listed in this manual, will be inspected by the technical service and assessed for ts affectation to guarantee.

Safety warnings

Important Safety Information: Handle the Smart Watch with care They contain sensitive electronic components, including batteries, and may malfunction, affect performance, or cause damage if dropped, burned, punctured, crushed, disassembled, o exposed to excessive heat, liquid, or high-pressure environments. concentrations of industrial chemicals, including nearly evaporated liquefied gases such as helium Do not use the Smart Band if it is damaged.
Batteries: Do ot try to replace the battery of the Smart Watch by yourself, as you could damage the Smart Watch and cause overheating and injury.
Charge : Charge the Smart Watch with the charging cable and a power adapter or a computer, charge the device only with an adapter that meets relevant national, international and regional safety standards.
Other adapters may not meet applicable safety standards and their use to charge the Smart Watch may present the risk of injury or death.
Using damaged cables or chargers, or charging the device if they are wet, may cause fire, electric shock, injury, or damage to the case o other belongings.
Prolonged exposure to heat: Avoid prolonged skin contact with the device, power adapter, charging cable and its connector, or the wireless charger when connected to a power source, as this may cause discomfort or injury.

Choking hazard : The Smart Watch and the small parts included  may present a choking hazard to small children or cause other injuries. Always keep them out of the reach of children.
Interference with medical devices : The Smart Watch and charger contain components and radios that emit electromagnetic fields.
These electromagnetic fields and magnets that the device may contain may interfere with the operation of pacemakers, defibrillators, or other medical devices.
Keep a safe distance between the medical device and the Smart Watch,
Request specific information about the medical device from the manufacturer and your doctor. Stop using the Smart Watch if you suspect it is interfering with your pacemaker, defibrillator, or other medical device.
Skin irritations: The Smart Watch can cause skin irritation if not cleaned properly.
Regularly clean the Smart Watch with a soft, lint-free cloth.
In the event of any type of skin reaction, stop using the Smart Watch If the problem persists, see your doctor.
Electrostatic discharges: When using the Smart Watch in areas where the air is very dry, it is easy to accumulate static electricity, so you may feel a small electrostatic discharge from the Smart Band on your wrist.
To minimize this risk, avoid using the Smart Band in extremely dry environments, or touch a grounded, unpainted metal object before putting on the Smart Watch.
Important Driving Information: Discoloration of the connector and the bottom of the Smart Watch after continued use is considered normal.
Dirt, debris, and exposure to moisture could cause discoloration.

Federal Communications Commission (FCC) Statement.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Note : This equipment has been tested and found to comply with he limits for a Class B digital device, pursuant to part 15 of the

FCC

Rules. These limits are designed to provide Reasonable protection gainst harmful interference in a residential installation. This quipment generates, uses and can radiate radio frequency nergy nd, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning he equipment off and on, the user is encouraged to try to correct he interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from hat to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning : Changes or modifications made to this device not expressly approved by SHENZHEN HYPERDON TECHNOLOGY OMPANY LIMITED may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this cquipment. Such modifications could void the user’ s authority to operate the cquipment.
IRF exposure statement:
his device complies with FCC RF radiation exposure limits set orthe for an uncontrolled environment. The device is installed and pirated without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>