DOOR Temperature and Humidity Sensor User Guide
- July 31, 2024
- DOOR
Table of Contents
Temperature and Humidity Sensor
Specifications:
-
Product Name: Temperature & Humidity Sensor
-
Model: Quick Start Guide 2024
-
Brand: Door.com
-
Power Source: 2 AA Lithium Batteries (Installed)
-
Connectivity: Requires DOOR Field Station (not directly to WiFi
or local network) -
Features: Battery Level Indicator, Humidity Signal Strength,
C/F Set Button, Temperature Status LED
Product Usage Instructions:
A. Get to Know Your Device:
- Battery Level Indicator
- Humidity Signal Strength
- C/F (Centigrade / Fahrenheit) Set Button
- Temperature Status LED
- Battery compartment cover
B. Add Device To DOOR App:
- Install the DOOR App on your smartphone.
- Create a new account or log in if you already have one.
- Install the Field Station within the app.
- In the app, tap on the card in the top right corner.
- Tap on the Add device icon and follow the on-screen
instructions.
C. Installation:
-
Connect the Temperature & Humidity Sensor to the Field
Station. -
Press the SET button on the sensor until it blinks red then
green. -
Consider location and mounting options for optimal
performance.
Note: Ensure the sensor is within the
recommended environmental temperature range for outdoor use.
Frequently Asked Questions (FAQ):
Q: Can the Temperature & Humidity Sensor be used
indoors?
A: While designed for outdoor use, it can be used indoors as
well, but ensure proper placement for accurate readings.
Q: How often should the batteries be replaced?
A: Monitor the battery level indicator. Replace the batteries
when the status LED blinks red rapidly every 30 seconds.
Temperature & Humidity Sensor
Quick Start Guide 2024
Door.com
A Welcome!
Thank you for choosing DOOR products!
At DOOR we’re reinventing how we live. Through the foundation of access
control business, we serve the Honest Day’s Worker–the builder, property
manager, contractor, driver, and in-home service provider–that keeps the world
running smoothly.
These individuals are the cornerstone of vital services such as housing,
transportation, cleaning, dog walking, and more. They deserve access to
technology and products that empower them to provide top-notch experiences to
their customers while maximizing the
DOOR is proud to stand by and innovate for our Honest Day’s Worker every day!
B Before You Begin
Please note the following user guide icons:
Very important information, please read carefully Good to know, helpful tips
for installation
D Required Items
The following items may be required:
Medium Phillips Screwdriver
Hammer
This device connects to the internet via DOOR Field Station, and it does not
connect directly to your WiFi or local network. In order for remote access to
the device from the app, and for full functionality, a DOOR Field Station is
required. This guide assumes the DOOR App has been installed on your
smartphone and a Field Station is installed and online.
C In the Kit
Nail or Self Tapping Screws
Double-sided Mounting Tape
E Get to Know Your Device
Battery Level Humidity Signal Strength
C/F (Centigrade / Fahrenheit) Set Button Temperature
Status LED Battery compartment cover Battery access & mounting cover
F Add Device To DOOR App
If you are new to DOOR, please install the DOOR App on your phone, if you have
not already.
Open the app and tap Sign up for an account. You will be required to provide a
username and a password. Follow the instructions, to set up a new account.
Log in to the app using your new username and password. If you already have an
account, please ensure you log in using that one.
Ensure you install the Field Station within the app before proceeding to
install the Temperature & Humidity Sensor.
1 In the Home screen of the app, tap on the card located in the top right.
Temperature & Humidity Sensor
AA Lithium Batteries (2)
(Installed)
Metal Plate
Quick Start Guide
LED Behaviors
Blinking Red Once, then Green Once Device Start-Up
Blinking Red And Green Alternately Restoring to Factory Defaults
Blinking Green Connecting to Cloud or Functioning Normally
Slow Blinking Green Updating
Blinking Red Once Device Alerts
Fast Blinking Red Every 30 Seconds Low Battery; Replace Batteries Soon
2 Tap on the “Add device” icon.
3 Approve access to your phone’s will be shown on the app.
4 Hold the phone over the QR code so that the code appears in the next steps
will be displayed.
5 Follow the on-screen instructions in the DOOR App, which will guide you step
by step.
G Installation
Connect Device to Field Station
Press the SET button
blinking red then green
Location & Mounting Considerations
The Temperature & Humidity Sensor is designed to be easy to install, and
portable, but before installing the sensor, the following items should be
considered:
While the Temperature & Humidity Sensor is designed for outdoor use, do not
use the sensor outside of the environmental temperature range, per the product
support page).
The sensor body is designed for outdoor use, but do not allow it to be
submerged.
Do not use the sensor near sources of extreme hot or cold, as this can affect
accurate ambient temperature readings, and in some cases may damage the
sensor.
As with most electronic devices, even if intended for outdoor use, the useful
life of the device can be extended if it is protected from the elements.
Direct intense sunlight, rain and snow over an extended period can discolor or
damage the device. Consider placing the sensor where it has overhead cover
and/or protection from the elements.
Place the sensor where it will be out of reach of children.
The Temperature & Humidity Sensor can be installed or mounted in at least one
of four ways:
or placed within an enclosure
2. Hang the sensor from a nail, screw, or hook, using one or all of the three
mounting holes on the rear of the sensor (mounting hardware not included).
3. Secure the sensor to a wall or vertical surface using the magnet feature
with the included metal plate, or by placing it on a suitable surface (that
responds to a magnet) without the included plate
4. Secure the sensor to a wall or vertical surface using alternative
fasteners or adhesive methods, such as double-sided mounting tape or Velcro
(not included).
Wall-mounting method
1. The sensor has a standard “keyhole” notch on the rear, at the top. This
allows for hanging the sensor from a nail or screw. Additionally, there are
two more mounting holes at the bottom of the sensor. The use of the second and
third holes will result in a much more secure mounting method. These holes are
hidden behind the removeable access cover. This cover affords protection
against tampering and device removal and their use is highly
for instructions on how to remove the cover from the bottom of the sensor.
Insert the tip of a slotted screwdriver and then gently twist it to pry off
the battery access cover.
2. If desired, mark or otherwise identify the exact position of your sensor
on the wall, including one or all of the mounting points (keyhole at top, two
screw holes at bottom). Use a level tool to ensure your sensor will be level,
if desired.
Install the Sensor
3. Your mounting hardware (nails, screws, hooks, etc.) will vary. If using
wall anchors, install the anchor(s) at this time, per the wall anchor
manufacturer’s instructions and/or per appropriate method for your
application. Insert the topmost nail, screw, or hook, in the wall, leaving a
gap between the nail/screw head and the surface, as shown.
About 1/8th inch or 3 mm
4. Hang the sensor from this topmost screw/nail/hook. If you will not utilize
the second and third mounting points, ensure the sensor is secure, and proceed
to Prepare to use your sensor.
5. If not already performed in a previous step, verify the sensor is level
prior to pre-drilling or inserting holes for the lower mounting points. Insert
one or both screws through the lower mounting holes, tightening them and
securing the sensor to the wall.
6. Replace the access cover by pushing it back into place, after aligning the
tab on each end with the matching slot in the sensor. Proceed to Prepare to
use your sensor.
Magnet-mounting method
1. The sensor has a built-in magnet in the back, to allow for mounting it
directly to a suitable* metal surface, or the included metal mounting plate
can be used for this purpose. After selecting the sensor location, remove the
plastic backing from the metal plate, to expose the mounting tape’s adhesive
side. Place the plate at the desired location, tape side down, and press
grease/grime, or any substance that will impact the tape’s adhesion to the
surface. It is suggested to clean the surface accordingly, such as with
rubbing alcohol, and dry it well, before this step).
2. Check that the sensor is secure, and does not move easily. If the sensor
does not seem to be secure, please mount your sensor per the wall-mounting
method steps.
*Suitable surfaces are metallic surfaces responsive to magnets, that allow for a good bond with the sensor’s built-in magnet. Uneven, irregular, textured, grooved, etcetera, surfaces may not be suitable. Surfaces subject to vibration and movement are not likely to be acceptable. Verify the surface is suitable and the sensor is secure, as physical damage to the sensor is not covered by the warranty.
Other mounting methods
Follow the manufacturer instructions if mounting your sensor by alternative
methods, such as with Velcro or double-sided mounting tape. If using an
adhesive method, is it recommended to
the possibilty of replacing or relocating the sensor later, when choosing
alternative mounting methods.
Prepare to use your sensor
Allow your sensor around an hour to stabilize and display the correct readings
on the LCD display and in the app. If you believe your sensor readings are
section of the full installation and user guide and/or app.
H FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: – Reorient or relocate the receiving antenna. –
Increase the separation between the equipment and receiver. – Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. – Consult the dealer or an experienced radio/TV
technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
I Contact Us
Support support@door.com
Door Technologies, Inc. www.door.com 1220 N Price Rd STE 2 Olivette, MO 63132
Copyright © 2024 Door Technologies, Inc. All rights reserved.
download the DOOR App:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>