door KNOX VDP102 Wide Angle Door Entry Camera User Guide
- June 4, 2024
- door KNOX
Table of Contents
door KNOX VDP102 Wide Angle Door Entry Camera
The VDP102 is a modern design video door camera with a backlit call button, IR LED and extra wide angle 2.4mm lens for a 110° viewing angle. Rust and weatherproof this unit is well built with anti-vandal properties. It is supplied with a rain guard for more exposed installations and an optional angled bracket for fitting in the best possible position.
User Information
- There are no user-serviceable parts, opening or attempting to repair the product will void the warranty.
- Do not install or use the device if the wires connected are damaged or have been subjected to water ingress. Shut off all power to the access control system before wiing this device.
- Maintaina dean and safe environment at all times All of the DoorKnox cameras have connection cables terminated into the same 7 colour coordinated wires. 4 wires are used to connect to the monitor and then 2 of the 3 remaining wires are used to connect to an electronic door lock. The common (COM) wire is always used along with either the normally open (NO) or normally closed (NC) wire depending on the lock type.
Monitor Connections
Mounting
Recommended to be installed between 150 to 160cm above the floor (About 5
feet), it should not be mounted in direct sunlight.
All specifications are approximate. System Q Ltd reservesthe right to change product specifications or features without notice. Whilst every efftort is made to ensure that these instructions are complete and accurate, SystemQ Ltd cannot be held responsible for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or non- performance of the equipment refered to.This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated WE/CG0783SS collection point as defined by your local council.