Door Locks FG01 Retro Bluetooth Door Lock User Manual

Door Locks FG01 Retro Bluetooth Door Lock

What’s in the box?

After you installed the lock correctly, please turn to the back to see the App Manual, thank you.

install(Left Open Door)

install(Right Open Door)

1. Before starting, install the lock correctly and power the gateway

2. Login TuyaSmart

3. ‘Turn on the BlueTooth on your phone

4. On TuyaSmart Home Page, press the ” Add Device” button or “

5. Wait for the addable device to show

6. Add the Lock
   Press “ to add the lock

7. Set the Lock (in the Smart Lock Page)

8. Set password Get in Set Page
   Press the” ” and set the 6-digit code (Don’t forget the password name)

9. Share the permission
   Get in Member management Page Share your permission with others

The Unlock Ways

1. Key
2. Knob
3. Keypad Password then “#”
4. TuyaSmart App unlock
5. Alexa App unlock (optional)
6. Voice unlock (optional)

The Lock Ways

1. Key
2. Knob
3. Long press “#” on Keypad
4. Auto lock (optional, can’t work when unlock by key or knob, set in lock’s set page[automatic lock switch])

Usage Scenario

• When you enter the door

1. Password Unlock
2. Bluetooth App unlock
3. Remote App unlock (need extra Bluetooth gateway)
4. Physical Key unlock

• When you ”“go out

1. Long press #
2. Remote App lock

• When someone comes

1. Turn the knob to unlock
2. Bluetooth App unlock
3. Voice unlock (need extra Bluetooth gateway and amazon voice device)
4. Remote App unlock (need extra Bluetooth gateway)

• When someone needs a single unlock

1. Set in-app, slide to obtain the dynamic password (remote set needs extra Bluetooth gateway)

• You are the landlord or do you want to share the permission

1. Check the member management in-app and add members

• You no longer use this lock, and others use your lock

1. No need to reset, the in-app main page, press and hold to remove the device

WARNING

A when auro lock is enabled if you want to look at once, disable the auto lock setting, lock it then enable aure AoCk again.

FCC Caution.

This device complies with part 15 of the FCC Rules Operation is sub ect to the following two conditions 11) This device may not cause
harmful interference and 2) this device must accept anyintarfor- ence rose ved, including inoartorence that may cause undesired
oration Any Changes or modifications not aspresaly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note:
This 9quipment has been tested and found to comply with the limits for a Class digital device, pursuant to part 15 of the Fcc Rules These limits are designed to provide reasonable protection against harmful interference in a regional installation. This equipment generates uses and can radiate radio frequency. energy and, not inštalled and used in accordance with the înstručtions, May cause harmful interference to radio communications. However
there is no guarantee that interference will not occur in a particular installation of this equipment does cause harmful interference to radio ortolovision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follawingmeasúr Reorient or relocate the roceivin8 antenna increase the separation be Worf the equipment and recent Connect the equipment to an outlet on a circuit different from that to which the receivers connected Consult the dealer or an experienced radio/TV technician for help uncornbaled environment. This aquiprnert should be installed and upward with minimum ana 20om bet on their &pour body

We suggest you use your own account to add a device. In order to protect your safety, the device is bound to the account. Even if you use the reset
button, you can’t unbind it unless you remove the device in-app. If you need more than one person to use this device, please share permissions through the member management in the device settings, thank you.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>