ARISAFETY 7804 Electrical Safety Tester User Guide
- July 31, 2024
- ARISAFETY
Table of Contents
ARISAFETY 7804 Electrical Safety Tester
Specifications
- Models: 7804, 7854
- Output Current: 5KVAC MAX, 6KVDC MAX
- Input: T6.3A 250V, 100-120V~/200-240V~ 700VA MAX, 50Hz/60Hz
FAQ
Q: What should I do if the instrument does not power on?
A: Check if the power source is functioning correctly and ensure the power input plug is securely connected to the instrument.
Q: How often should operators be trained on safety procedures?
A: Operators should undergo safety training regularly to stay updated on safety protocols and best practices.
SAFETY CHECKLIST
- Survey the test station. Make sure it is safe & orderly.
- Always keep unqualified/unauthorized personnel away from the test area. Familiarize yourself with safety protocols in the event of a problem.
- Exercise caution and never touch products or connections during a test.
- Train operators. Never touch clips directly and always connect the return lead first. You should always know when a test is being performed.
WARNING: THIS GUIDE WAS CREATED FOR OPERATORS HAVING SOME FAMILIARITY
WITH ELECTRICAL SAFETY TESTING. AN ELECTRICAL SAFETY TESTER PRODUCES VOLTAGES
AND CURRENTS THAT CAN CAUSE HARMFUL OR FATAL ELECTRIC SHOCK. TO PREVENT
ACCIDENTAL INJURY OR DEATH, THESE SAFETY PROCEDURES MUST BE STRICTLY OBSERVED
WHEN HANDLING AND USING A TEST INSTRUMENT. CONTACT US AT
INFO@ARISAFETY.COM FOR MORE INFO ON HOW TO GET TRAINED ON ELECTRICAL SAFETY
TESTING.
INSTRUMENT SETUP
WARNING: LOCATE A SUITABLE TESTING AREA WITH A THREE-PRONG, GROUNDED OUTLET. BE SURE THAT YOUR THREE-PRONG OUTLET HAS BEEN TESTED FOR PROPER WIRING. READ THE SAFETY CHECKLIST OF THIS GUIDE BEFORE STARTING TO TEST.
-
Connect the female end of the power input plug into the rear of the instrument and plug the male end of the cord into a grounded power source.
-
Plug the Interlock Disable Key into the signal/input connector on the rear panel of the instrument.
-
Push the POWER button to turn instrument ON.
The initialization screen will appear first, then after three seconds the home screen will appear as shown below.
TOUCH SCREEN OPERATIONS
-
TOUCH
Tap the virtual buttons to open various functions. -
SWIPE UP, DOWN, LEFT & RIGHT
Simple gestures allow you to quickly move through screens & parameters. -
DRAG & DROP
Simply touch and hold the test file, test step, or parameter and drag the file to the appropriate location.
TEST SET UP
TEST CONNECTION
ADAPTER BOX CONNECTIONS (7804/7854)
The adapter box (P/N 38482) provides an easy way to connect the HypotULTRA® to
a device under test (DUT).
Note: If you are testing a Class I product, safety agencies may require you to perform a Ground Bond test on the ground circuit of the DUT along with the Hipot test.
- Plug the black return lead (P/N 38490) into the Return terminal. Plug black sense lead into the Sense (-) terminal.
- Attach the clip-terminated end of the return lead to the dead metal on the chassis of the DUT.
- Connect the high voltage lead from the Adapter Box into the High Voltage terminal on the front panel of the instrument.
- Plug the red sense lead from the Adapter Box into the Sense (+) terminal. Plug the red high current test lead into the Current terminal.
- Plug the power cord of the DUT into the Adapter Box receptacle.
WARNING: DO NOT TOUCH THE DEVICE UNDER TEST ONCE YOU START THE TEST.
TEST LEAD CONNECTIONS
- Plug the black return lead (P/N 38490) into the Return terminal. Plug black sense lead into the Sense (-) terminal.
- Attach the clip-terminated end of the return lead to the dead metal on the chassis of the DUT.
- Connect the high voltage lead (P/N 4040A-08) into the High Voltage terminal on the front panel of the instrument.
- Attach the high voltage lead to the current-carrying conductors of the DUT.
- Plug the red sense lead into the Sense (+) terminal. Plug the high current test lead into the Current terminal. These two leads act as the red high current output.
- Clip the other end to the ground pin of the DUT plug.
Class I Product
If there is no ground circuit present on the DUT, you can use test leads to connect the HypotULTRA® to the DUT.
Class II Product
Did you know? If necessary, a 10 x 20 cm piece of foil can be attached to the enclosure to simulate a full hand contact to the DUT. This foil acts as the return point. The Return and Sense (-) terminal are attached to the foil. Always check to make sure you made a good connection between the DUT and the return clip.
PERFORM TESTS
RESULTS
After a test has completed, the Results icon will be available on the screen. Tap RESULTS to view your test results.
SCAN FOR VIDEO LIBRARY
Experts In Electrical Safety Compliance.®
For additional information about these and other key features of the
HypotULTRA®, please consult the full Operation and Service Manual or call us
toll-free 1-800-858-TEST (8378) or
+1-847-367-4077
© Associated Research • arisafety.com
FOLLOW US!
Documents / Resources
|
ARISAFETY 7804 Electrical Safety
Tester
[pdf] User Guide
7804 Electrical Safety Tester, 7804, Electrical Safety Tester, Safety Tester,
Tester
---|---