NHT N-C 4 Black 3-Way Floor-standing Tower Speaker Operational Manual

NHT N-C 4 Black 3-Way Floor-standing Tower Speaker

Specifications

• SYSTEM TYPE: Tower Speaker
• CONFIGURATION: 4-way acoustic suspension design
• WOOFER: (2) 6.5” aluminum cone
• LOWER MIDRANGE : 6.5” aluminum cone
• MIDRANGE: 2“ aluminum dome
• TWEETER: 1” aluminum dome
• FREQUENCY RESPONSE: 45Hz-20kHz (in room)
• SENSITIVITY: 85dB (2.83v@1m)
• IMPEDANCE: 8 ohms nominal, 5 ohms min.
• POWER: 75 – 250 w/ch
• INPUTS: Nickel plated, 5-way binding posts
• DIMENSIONS: 41” x 7.5″ x 11.75″ (H x W x D), Base: 14” x 5″ (W x D)
• WEIGHT: 6 lbs.
• FINISH: High Gloss Black

Introduction

NHT’s C- Series represents our best efforts in passive loudspeaker design. The C- Series is based on the same design fundamentals that established NHT’s reputation for accuracy and high performance, and adds new driver and cabinet technology which reduce distortion and improve dispersion.  The result is a more        articulate, more musical listening experience.

The following Setup Guide will help you unpack, connect, and place your new C- Series loudspeakers in your listening room.  If you are interested in specifications or in technology used in the design, please visit our web-site at www.nhthifi.com and look up information on your specific model.  If at any time during or after setup you require assistance, feel free to call our Customer Hotline at 1-800-NHT-9993 (800-648-9993).

This Setup Guide addresses the following models:  NHT C-1 and C3 bookshelf speakers, C-4 tower speaker and C-LCR center channel/LCR.

Unpacking your Speakers

As you unpack your C-1, C-3 and C-LCR speakers, you will notice adhesive- backed, rubber bump-ons included in the carton.  You will need to stick these on the bottom of the speakers near the four corners if you are placing these on a table or bookshelf. They will serve to keep the speaker from sliding around and to protect the bottom surface from scratches.

The C-4 may require the help of a friend to unpack it due to its weight and size.  The C-4 has a flat bottom and comes with stabilizers that which attach to the bottom of the speaker. Position the speaker on its back and prop up the bottom section with some of the foam packing materials. Fasten the stabilizers using the        supplied machine screws (See Fig. 1) using a philips head screwdriver. The stabilizers for the C-4 also include rubber cones.  The rubber cones are ideal for use on wood or tile floors. They can be adjusted if you have an uneven floor and include a locknut to lock them down. We recommend you use metal cones when placing the C-4 on heavy carpet flooring to add stability.  Metal cones can be purchased at nhthifi.com.

Placement

NHT’s C-3 and C-1 speakers can be placed on stands, on shelves or hung on the wall.  Given the high performance of these models, NHT recommends placement at close to ear level to achieve maximum fidelity.  The C-1 is a 2-way design and stereo imaging will benefit from a slight “toe-in” towards the listening position.  The rest of the C-series are all 3-way designs and can be placed without any toe-in angle.

If you decide to wall mount the C-3, there are threaded inserts on the rear of the cabinet for wall mounting. NHT recommends the use of Vantage Point Bookself Mounts brackets. These are available at www.nhthifi.com in the accessories section.

The C-LCR can be used as the main left & right, rear surrounds and center channel. Its dispersion character-istics allow for horizontal or vertical orientation. However, if you are using the C-LCR as a center channel, you should place it horizontally.  Ideally, the center channel should be placed as close as possible immediately above or below the television, with the tweeter closest to the TV (Fig. 2)

It is important to know that small changes in speaker position can have a notable effect on sound quality.  Moving speakers closer to walls or corners will increase mid-bass output, but may result in artificial “boominess”. Placing them farther away from room boundaries tends to decrease bass output yet improve stereo imaging and detail.  We recommend a distance of 6” – 12” from the rear wall if possible.

Room furnishings also play a significant role.  Soft furnishings (e.g. sofas, carpets, and curtains) tend to absorb mid and high frequencies, which can result in perceived dullness, whereas hard surfaces and sparse furnishings tend to have the opposite effect.

Thus, experimenting with the effects of different placements in your own listening environment is the key to finding the sound you like best.

Here are some tips for maximizing the performance of your speaker system:

• Position the speaker 1.5 times as far away from you as they are from each other. (Fig. 3)
• Left and Right speakers should be equidistant from the listening position.
• Try to keep tweeter height close to ear level when in the listening position.
• Bookshelf speakers should be placed upright.
• Try to keep the speakers flush with the front edge of shelves or cabinets.
• The C-Series should not require long break in time, play music for an hour or so is sufficient.
• For surround systems, use the same basic setup (all shown in Fig. 4) and when possible:
• Place the C-LCR center channel speaker right above or right below the TV. If you need a wall mount, check out the Pinpoint AM-15 available at www.nhthifi.com on the accessories section.
• Place the rear speakers in an equilateral triangle with the listening position, at least 5’ apart.
• Rear speakers should be at the same height, or higher than, the front channels.

Unfortunately many rooms will not allow ideal placement.  As a general rule, try to keep the rear channel       speakers equidistant from the center of the listening area.  If the rear speakers have to be close to the main seating area, we recommend adding time delay in your surround processor to make them seem farther away, and make sure they are placed, above the heads of the listeners.

Connections

Before connecting your C-Series speakers to the receiver/amplifier, turn off the AC power to avoid potential damage to your components.

The terminals on the back of your speakers accept raw wire, banana plugs or spade lugs.  Note that these terminals should be tightened only by hand, as excessive force can break them.  We recommend your speaker wire be at least 16 gauge, 14 gauge for longer runs.

Prepare the wires by stripping 1/4” – 3/8” of insulation from the ends and tightly twist the exposed strands.

Finally, connect your speakers to your amplifier or receiver, making sure that the speakers are “in phase,” that is, the same half of the wire pair connected to the Positive terminal (+, usually red) on both the amplifier and the speaker.  The other half of the same wire connect to the Negative (-, usually black) terminals on both amplifier and speaker.

Most speaker wire has one half of the pair marked with either lettering, ridges, the “+” sign or color to help you make the proper connections.

Before powering up the receiver/amplifier, make sure there are no stray strands from one terminal touching the other terminals.

Operation

All NHT C-Series speakers are compatible with most amplifier power ranges and are designed to handle a wide range of listening levels.  Every speaker, however, has limits.  Speaker damage most often occurs from sustained high volume levels in some or all frequencies.  Try to avoid excessive bass or treble settings or equalizer boosts.

The best tool you have is your ears.  If you hear unusual distortion or breakup, decrease the volume immediately.  If you are unsure, place your hand close to the woofer. If you feel heat radiating from the driver, you are playing the system beyond its limits.

Maintenance

Your NHT speakers will require little if any maintenance under normal use. Try to avoid exposing them to      direct, sustained sunlight, high temperatures or moisture.  Cabinets can best be dusted using a clean, soft chamois cloth.  The finish on your speakers is durable but dry rough cloth and/or excessive force can leave fine scratches over time.  Try to avoid using liquid cleaners and household furniture polish, particularly around the speaker components.  To clean the grilles, remove them from the speaker and use a soft brush or a vacuum on its lowest setting.  Do not attempt to clean the speaker components.

Satisfaction

We hope you enjoy the sound of your NHT C-Series speakers as much as we do. Your warranty is printed on the back of this Setup Guide.  Once again, if you have any questions or problems, please call us at our      Consumer Hotline. 1-800-NHT-9993

Limited Warranty

Valid Only in the U.S.A.

Warranty Period

For a period of 5 years for parts and 5 years for labor (1 year parts and 90 days labor for electronics) from the date this product is first purchased from an authorized NHT dealer, Now Hear This (NHT) warrants that if it fails to function properly due to a manufacturing defect, despite its being installed and operated according to these instructions and used under normal conditions, it will be either replaced or repaired with new or rebuilt parts (both at NHT’s option) with a unit of com-parable value without charge to you.

What’s Not Covered

Altered, defaced or removed serial numbers void this warranty.

This warranty does not cover any product used in trade, business, industrial or commercial applications.

This warranty also does not cover the cabinet or appearance factors, or costs, defects or damage resulting from misuse, abuse, accident, improper maintenance, alterations or modifications not authorized in writing by NHT, or parts or labor from any source other than an authorized NHT service location.

Damage due to power exposure in excess of the speaker’s published power ratings; i.e., overpowering, lightning or power surges, are also not covered.

Your Rights

This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

NHT limits this warranty to the purchase price of the product, excludes incidental or consequential damages, and limits its obligations under any implied warranties under state laws to a period not exceeding their warranty periods.  As  some states do not allow the above limitations, however, they may not apply to you.

To Obtain Service

To find the name and address of the nearest authorized NHT service location, call or write:

Customer Service Department, NHT, 140 West Industrial Way, Benicia, CA 94510, 1-800-NHT-9993 (648-9993), www.nhthifi.com

For your future convenience, please keep this warranty with your sales receipt, and record date and place of purchase for further reference.

FREQUENTLY ASKED QUESTIONS

Where are NHT speakers produced?****

With its corporate headquarters in Benicia, California, NHT Loudspeakers (Now Hear This), often known informally as NHT Audio, is an American manufacturer of loudspeakers and audio components.

Which is better, a 3-way or 4-way speaker?****

The addition of a tweeter to a 4-way speaker to assist produce more high-end sound is the primary distinction between a 4-way speaker and a 3-way speaker. This produces a wide range of sounds at all frequencies.

Is NHT a good speaker?****

You get the idea that you own a high-end speaker with the NHT C4’s exceptional build quality, which has a magnificent appearance and sound.

How do you know if a speaker is of high caliber?****

The best way to test them is to SLOWLY play a signal through them while listening to it to hear if any sound is produced. If the speaker stops working or sounds terrible, it needs to be replaced. It’s not exactly a scientific exam.

What level of audio fidelity is best for music?****

Lossless audio files are the best for sound quality. Among them are AIFF, WAV, or FLAC. These files are referred to as “hi-res” since they are at least as excellent as CD-quality.

Should I direct speakers right towards my ear or toward it?****

Keep in mind that speakers, whether you have them on stands, a shelf, or mounted on the wall, are frequently designed to sound best when they are level with your ears when you are listening to them.

Is driving 4 ohm speakers harder?****

Greater current is required (V=IR) to supply the same voltage to the drivers of 4 ohm speakers. Because they are “harder to drive,” they need an amp that can output to a 4 ohm load.

How many speakers can a 4 channel be connected to?****

A 4-channel amplifier has the ability to power up to 8 speakers. In fact, if you wire the amp properly, you will be able to draw up to twice as much power from it. First, ensure that your amplifier can be securely set up in this manner.

Does experience make a speaker better?****

They degrade frequently. The parts found inside Hi-Fi speakers will deteriorate and fail over time, just like any other electronic component. No matter how much you want to, you must protect your speaker system by not utilizing it nonstop at maximum volume (and I really want to).

Does sound quality increase with wattage?****

Yes, speakers do play louder and more clearly at higher power settings (watts). However, little changes in power don’t make much of a difference in terms of audibility. In order to detect a change, the wattage would have to be increased by twofold (a 3dB increase).

Do speakers that are on the floor sound better?****

Remember that audio speakers function best when positioned at ear level. If you’re picky about sound, the floor is not the greatest place for them. If your speakers are small enough, you might want to consider placing them on a desk, shelf, or console. NEVER set your speakers directly on the ground.

Has the speaker ever had “feet” of any kind?****

Although the speaker is not built-in, it does come with rubber bumpers.

Is the speaker 8 ohm?****

Impedance: nominally 6 ohms, minimum 4 ohms.

Can they be powered by amplifiers with 8 and 4 ohms?****

Yes, they work flawlessly with any amplifier or receiver with a resistance range of 4 to 8 ohms.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>