Sunco DL_BFDR56-13W 6 Inch LED Retrofit Baffle Downlight User Manual

Sunco DL_BFDR56-13W 6 Inch LED Retrofit Baffle Downlight

Specifications

• Voltage: Compatible with standard voltage
• Wattage: 13W
• Wattage Equivalency: Equivalent to 65W incandescent bulb
• Beam Angle: Wide beam angle for effective lighting
• Weight: Lightweight design for easy installation
• Housing Material: Durable material for long-lasting use
• Dimmable: Compatible with dimmer switches
• Model: DL_BFDR56-13W
• Average Lifetime: 50,000 hours
• Lumens: 965LM
• Moisture Rating: Damp-rated for safe use in moist environments
• CRI: 80+ for accurate color rendering
• Usage: Suitable for indoor use
• IC Rated: IC-rated for direct contact with insulation
• Warranty: 7 Years

Frequently Asked Questions

Common Troubleshooting

Light isn’t turning on: Double check if the fixture is properly connected and if the circuit breaker hasn’t been tripped.

Light unexpectedly fails:

• Dimming: Ensure compatibility with dimmer switch.
• Flickering: Check for issues related to dimming or other lights on the same circuit.
• Buzzing: Investigate potential causes such as power outages or nearby appliances/electronic devices.

Whats in the Box?

Retrofit Downlight

Before You Start

Safety Information

To reduce the risk of fire, electric shock, or physical injury:

• Turn off circuit breaker before installing this fixture.

• This product should be installed by a person familiar with the construction and operation of the product the hazards involved. Safety eyeglasses and gloves are recommended.

• Abide by related regional and local laws or regulations.

• Proper grounding is required to ensure safety.

• Do not alter, relocate, or remove wiring during installation.

• Do not make or alter any open holes in wiring enclosure or electrical components during installation.

• Check for shipping damage before insatalling. If the product is damaged, do not use it.

• Keep fixture away from corrosive substances.
  This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1.) This device may not cause harmful interference.

• Suitable for damp locations at temperature ranging from
  4°F to 104°F. Not for use where directly exposed to water.

• Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.

• Use safety precautions and abide by regional and local laws or regulations.

• This product is not compatible with 3rd party sensors.

• This product is not compatible with photo controls.

• This product is not compatible with occupancy sensors.

• This product is not compatible with timing devices.
  WARNING:
  Cancer & Reproductive Harm- www.P65Warnings.ca.gov
  This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.

Quickstart Guide

1. Step 1
   Locate the recessed housing.

2. Step 2
   Determine type of connector available.

3. Step 3
   Connect the adapter to make connection.

4. Step 4
   Push downlight into can until secure.

Installation Guide

• STEP 1
  a. Turn off circuit breaker before installation.
  b. Locate the housing.
  NOTE: Remove previous fixture. Fixture may be hot so allow time to cool after turning off power.

• STEP 2
  Secure the clip springs firmly within the retrofit connector.
  (Important: When inserting the spring, gently press down. If the spring does not lock in easily, try turning it around.)

• STEP 3
  Determine the type of connector available.
  TP24 Connector(1) -E26 Base(2)

• STEP 4
  Connect the appropriate adapter to make connection in the housing.
  NOTE: the wires may come lose from the connectors so ensure they are attached.
  Tuck all wires into the can.

• STEP 5
  Line up trim ring with opening.
  Push downlight into can until secure. Compression clips will hold retrofit light in place.

• STEP 6
  Push up springs into can clips.
  Turn on circuit breaker and test light.

Product Details

Recommended Dimmers

Specifications

Common Troubleshooting

Feeling in the dark about an issue with your product? No worries! Our troubleshooting section is here to shed some light and provide you with easy- to-follow solutions for any problem.

If you still need some assistance, please feel free to contact us with any questions. Our team of lighting experts are happy to help brighten your day.

• Installation

  • Light isn’t turning on.
    Double check if fixture is properly connected and circuit breaker hasn’t been tripped.

  • Light unexpectedly fails.
    For further assistance, contact our customer support.

• Dimming

  • Light not dimming to lowest setting.
    Ensure minimum dimmer load requirement is met.

  • Light not dimming smoothly.
    Verify dimmer compatibility with fixture.

  • Light not compatible with dimmer switch.
    Check light-dimmer compatibility. Consider purchasing compatible switch if necessary.

• Flickering

  • Light is flickering when turning on.
    Check that fixture wiring connections are secure.

  • Light flickering with other lights on the same circuit.
    Check that the lights on the same circuit are not overloading the circuit.

  • Light flickering when turned on.
    Verify fixture compatibility.

  • Light flickering when dimmed.
    Verify dimmer switch compatibility.

• Buzzing

  • Fixture buzzing with power outages.
    Verify light is connected to surge protector securely.

  • Fixture buzzing with appliances or electronic devices.
    Look for nearby interferences that can cause buzzing. Such as televisions, radios, computers, etc.

  • Fixture buzzing when dimmed.
    Verify dimmer switch compatibility.

Light Distribution Angle

• Lighting distribution angle refers to the spread of light emitted from a light source. It is an important factor to consider when selecting a fixture or bulb, as it affects the way it will illuminate an area. There are two main types of lighting distribution angles:
• A symmetric lighting distribution emits light evenly in all directions, creating a cone-shaped pattern that provides a pool of light. This type of lighting is ideal for general lighting and illuminating large areas. Common applications for symmetric lighting include general area illumination, security lighting, and perimeter  lighting. Symmetric lighting is also used to a certain degree in up-lighting.
• An asymmetric lighting distribution angle, also known as beam angle, creates a pattern that focuses light in a specific direction. This type of lighting is ideal for task lighting as it reduces glare and light spill in other areas. Common applications include task lighting in spaces such as landscape settings, retail stores, museums, and much more.
• It is important to note that the lighting distribution angle can also be affected by other factors such as the reflector design of the light source, the type of lens used, and the distance between the light source and the surface being illuminated.

Customer Support

Warranty Policy

This product is covered by our industry leading 7 year warranty.
It gets even better – scan the QR code for 2 extra years of protection!

30 Day Return Policy

• At Sunco, we value our customers and stand by the quality and performance of our products.
  If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date.

Customer Service
Our Los Angeles team of lighting experts is here to assist you with all your needs! Contact us at:

Email: support@sunco.com
Call or Text: 844-334-9938

support@sunco.com
844-334-9938

AMERICAN COMPANY

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>