ISOtunesSPORT ADVANCE Tactical Hearing Protector User Manual

July 30, 2024
ISOtunesSPORT

ISOtunesSPORT ADVANCE Tactical Hearing Protector User Manual

ISOtunesSPORT ADVANCE Tactical Hearing Protector - front page with
image

Location of Controls

ISOtunesSPORT ADVANCE Tactical Hearing Protector - Location of
Controls
ISOtunesSPORT ADVANCE Tactical Hearing Protector - Location of
Controls

  1. Music Volume Up
  2. Music Volume Down
  3. TSC™ Volume Up
  4. TSC™ Volume Down
  5. Multi-Function Button (MFB)
  6. Bluetooth Mic
  7. LED Indicator Light
  8. Charging Port
  9. Magnetic Earbuds

Tactical Sound Control™ Technology

This product includes TSC Technology – Tactical Sound ControlTM . This is a microphone technology that allows the user to hear the world around them, but always at a safe listening level. When ambient noise breaches a safe listening level, the microphone technology immediately responds and attenuates to a safe level.

This feature automatically turns on when the product turns on. Adjusting the TSC volume is easy. Simply press the TSC Volume Up (3) and Down Button (4).

Charging

The earplugs are charged with a micro-USB charger and hold up to 10 hours of music and talk time between charges.

  1. Please charge with the included micro-USB cable by plugging it into the Charging Port (8). *Charging voltage should not exceed 5v.

  2. While the cable is plugged into the Charging Port (8), the LED Indicator Light (7) will let you know if the battery is charging or fully charged.

Power On/Off

Power On: Press and hold MFB (5) for 3 seconds. (you will hear “Power On”)ISOtunesSPORT ADVANCE Tactical Hearing Protector - Power On Off
button

Power Off: Press and hold MFB (5) for 3 seconds. (you will hear “Power Off”)

ATTENTION

The ISOtunes Sport ADVANCE features a power-off feature that con-serves battery life. After 2 hours of Bluetooth disconnection, the device will power off. Simply power back on to continue using.

Bluetooth Pairing

After powering on, the headphones will automatically enter Pairing Mode. You will hear “Bluetooth Pairing Mode” and the LED Indicator Light (7) will flash, alternating Blue and Red.

  1. Open your Bluetooth settings on your device.

  2. Search “ISOtunes Sport ADVANCE.” Pair and connect.
    Once connected you will hear “Bluetooth Connected.”

Dual Connect Mode

This product can connect to two devices at the same time such as your phone and your computer.

  1. Pair and Connect to your first device as described in Bluetooth Pairing.
    This will be device A.

  2. Press and Hold the MFB (5) for 7 seconds until you hear “Bluetooth Pairing Mode” (you will hear Power Off, keep holding the button until you hear “Bluetooth Pairing Mode”).

  3. Pair and Connect to the 2nd device as described in Bluetooth Pairing.
    This will be device B.

  4. On Device A, go to the Bluetooth menu and manually connect to ISOtunes PRO Aware.

  5. Both devices are now connected.

Pairing Reset

If you have issues connecting to any device, we recommend a Pairing Reset:

  1. The headphones need to be powered on.
  2. Press and Hold the Volume Up (1) and the Volume Down (2) for 4 seconds.
  3. Continue holding, listen for a double tone and then release.

Music

ISOtunesSPORT ADVANCE Tactical Hearing Protector - Music
control

Play/Pause: Short single press MFB (5)
Next Track: Double press MFB (5)
Previous Track: Triple press MFB (5)
Music Volume Up: Short single press Volume Up (1)
Music Volume Down: Short single press Volume Down (2)
TSC™ Volume Up: Short single press Volume Up (3)
TSC™ Volume Down: Short signle press Volume Down (4)

Phone Calls

Answer/End Call: Short single press MFB (5)

ISOtunesSPORT ADVANCE Tactical Hearing Protector - Power On Off
button Reject Call: Press and hold MFB (5) for 1 second

Siri / Google Assistant

Press and hold MFB (5) for 1 second.

Fitting

Models
IT-36 ISOtunes Sport ADVANCE

Full manual can be found at ISOtunes.com/ADVANCEManual

Important
Please read, understand, and follow all safety information.

Fitting
The ISOtunes Sport ADVANCE comes with 4 sets of TRILOGY™ foam eartips (XS,S,M,L) and 3 sets of silicone eartips (S,M,L). Choose the size that fits best in your ear canal. Remember, the snugger the fit, the better the noise blocking. The silicone eartips are intended for use when NOT in noisy situations.

ISOtunes® TRILOGY™ foam eartips have a threaded core and the sound port on the earbud is also threaded.

  1. Twist the foam eartip counterclockwise to remove and clockwise to place on a new foam eartip.
  2. Carefully compress the foam eartip on the stem/sound port.
  3. Insert the foam/eartip into your ear as deeply as is comfortable and hold for 5 seconds while the foam expands.
  4. Repeat with the second eartip.

Hint: To open your ear canal wider, lift the top of your ear up and away from your head, as shown in the diagram.

Introduction
Thank you for purchasing ISOtunes Sport ADVANCE professional noise-isolating earbuds. These earbuds have been specifically designed to protect against harmful noise – allowing you to block out much of the surrounding noise so you can listen to your music or talk on the phone with less interruption. This product has been tested and meets the ANSI & NIOSH standards for a hearing protector, with a Single Number Rating (SNR) of 33 dB and a Noise Reduction Rating (NRR) of 26 dB. Full testing details are available in the Noise Attenuation section of this booklet.

Noise Attenuation
ISOtunes Sport ADVANCE is tested and approved in accordance with ANSI S3.19-1974 Specifications.

ANSI
S3.19-1974
The level of noise entering a person’s ear, when these earbuds are worn as directed, is closely approximated by the difference between the A-weighted environmental noise level and the Noise Reduction Rating (NRR). Improper fit of this device will reduce its effectiveness in attenuating noise. Consult the enclosed instructions for proper fitting.

A1: Frequency (Hz)
A2: Mean Attenuation (dB)
A3: Standard Deviation (dB)

Example:

  1. The surrounding noise level measured at the ear is 100 dB.
  2. The NRR of ISOtunes Sport ADVANCE is 26 dB.
  3. The noise level entering the ear is approximately equal to 74dB.

Please note that the NRR is based on the attenuation of continuous noise and may not be an accurate indicator of the protection attainable against impulsive noise, such as gunfire.

EN 352
B1: Frequency (Hz)
B2: Mean Attenuation (dB)
B3: Standard Deviation (dB)
B4: Assumed Protection Value (APV) (dB)
B5:
H = Hearing protection estimation for high frequency sounds (f ≥ 2000Hz)
M = Hearing protection estimation for medium frequency sounds (500 Hz < f < 2000Hz)
L = Hearing protection estimation for low frequency sounds (f ≤ 500Hz)

SafeMax™ Technology
ISOtunes Sport ADVANCE incorporates SafeMax™ Technology, therefore its volume output has been limited to 85 decibels (IT-36, IT-38), and 79 decibels (IT-39). ISOtunes® devices with SafeMax™ Technology are OSHA, NIOSH, and ANSI compliant and, when designated, meet the European Safety Standard EN 352.

Tactical Sound Control™ Technology
This product includes TSC – Tactical Sound Control or Aware Technology. This is a microphone technology that allows the user to hear the world around them, but always at a safe listening level. When ambient noise breaches a safe listening level, the microphone technology immediately responds and attenuates to a safe level.

This feature automatically turns on when the product turns on. Adjusting the TSC/Aware volume is easy. Simply press the TSC/ Aware Volume Up and Down Button.

Cleaning and Maintenance
TRILOGY™ foam eartips are disposable. To ensure peak performance, we recommend replacing TRILOGY™ foam tips every three months or when they become soiled. In order to purchase additional tips, please go to www.ISOtunes.com or www.ISOtunes.co.uk

TRILOGY™ foam eartips should be regularly inspected for deterioration, cracking, or other damage. The eartips can be cleaned in between uses with a damp cloth and water. Overtime, the eartips should be replaced.

Clean your ISOtunes Sport ADVANCE by gently wiping them with a clean damp cloth. Mild soap can be applied to the cloth.

Do not use abrasive cleaning solvents to clean the headset. Avoid scratching the headset with sharp objects, as this may cause damage.

Keep the headset away from high temperature areas.

WARNINGS
ISOtunes Sport ADVANCE does an excellent job of blocking outside noise. As such, this product should NOT be used in environments where users need to be fully aware of their surroundings for personal safety reasons. For example, do NOT use them while driving a car or riding a motorcycle. Similarly, do NOT use them when riding a bicycle outside. The user is solely responsible for ensuring that this product is used ONLY in safe environments.

This product may be adversely affected by certain chemical substances, such as bug spray and sunscreen. Further information may be sought from the manufacturer.

These earplugs should not be used where the connecting cord is at risk of being caught up during use.

Recommendations
The wearer should ensure the product is properly cleaned and dry before and after use. Storage should be in a clean and dry location between -20 °C and 50 °C. The battery should not be fully discharged before long term storage.

The wearer should ensure that:

  • The hearing protector is fitted, adjusted, and maintained in accordance with the manufacturer’s instructions.
  • The hearing protector is worn at all times in noisy environments..
  • The hearing protector is regularly inspected for serviceability.

If these recommendations are not adhered to, the protection afforded by the hearing protector will be severely impaired.

Additional Notes
ISOtunes Sport ADVANCE is compliant with Bluetooth® V5. We do not guarantee compatibility of all functions on every Bluetooth®-enabled device. Please check your device’s user manual for compatibility and functionality.

For additional information or questions about ISOtunes® products or spares and accessories, please contact our support team.

UK & Europe
uk-eurosupport@isotunesaudio.com

North America
support@isotunesaudio.com
1-844-396-3737
Monday-Friday 9-5 ET

FCC
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the users’ authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals