ISOtunesSPORT INSTINCT Electronic Earbuds Instruction Manual
- July 30, 2024
- ISOtunesSPORT
Table of Contents
ISOtunesSPORT INSTINCT Electronic Earbuds
Location of Controls
Earbud Touch Surface Functionality
UP (+): Single Tap
DOWN (-): Double Tap
Either earbud can be used to control Tactical Sound Control volume.
Tactical Sound Control™ Technology
This product includes TSC (Tactical Sound Control™) Technology. This is a microphone technology that allows the user to hear the world around them, but always at a safe listening level. When ambient noise breaches a safe listening level, the microphone technology immediately responds and attenuates to a safe level.
Adjusting the TSC Volume is easy. Simply tap the left earbud once for TSC
Volume Up and tap the left earbud twice for TSC Down.
Charging the Earbuds
There are three batteries to charge:
- Charging Case Battery
- Left Earbud Battery
- Right Earbud Battery
Place earbuds into the charging case. The earbuds’ LED Indicator Light (3) should be solid red, indicating that the earbuds are charging (if the LED Indicator Light (3)) doesn’t appear, refer to the troubleshooting section at the end of this manual).
Earbud LED Indicator Light (3)
Solid Red =
Charging (Earbuds in case)
Solid Blue = Fully
Charged (Earbuds in case)
ATTENTION
The ISOtunes Sport INSTINCT features a power-off feature that conserves
battery life. After 2 hours of Bluetooth disconnection, the device will power
off. Simply power back on to continue using.
Charging the Case
Insert USB C charging cable to charge the case. The Charging Case Battery Indicator Lights will start flashing to indicate the charge level.
Charging Case Indicator Light
25% Battery Life
50% Battery Life
75% Battery Life
100% Battery Life
IMPORTANT CHARGING INFORMATION
Please charge with the included USB C cable by plugging it into the Charging Port. *Charging voltage should not exceed 5v.
Power On/Off
Method 1
Power On: Open the charging case. The earbuds will power on.
Power Off : Place the earbuds into the charging case and close the case. The earbuds will power off. Method 2
Power On: In OFF MODE, touch and hold R earbud until you hear “Power On” this will turn on your R earbud. Repeat with other earbud (est. time three seconds)
Power Off : In ON MODE, touch and hold R earbud for 5 seconds until you
hear “Power Off” this will turn off your R earbud. Repeat with other earbud
(est. time five seconds)
Earbud LED Indicator Light (3)
Blue Flash = Power ON
Red Flash = Power OF
Troubleshooting
Fitting
-
Carefully compress the foam eartip on the stem/sound port.
-
Insert the ear tip into your ear as deeply as comfortable.
-
Slightly rotate earbud until it is secure in the bowl of your ear.
-
Make the earbud rest tightly next to your inner ear edge.
Factory Reset
For issues with with powering off, pairing, or touch surface functionality we recommend a factory reset.
- With the case open, press and hold the battery life indicator button on the back of the case for ten seconds with both earbuds in the case.
- LED lights on the charging case will flash to indicate a successful pairing reset.
