REMINGTON H9100 PROluxe Rollers Instruction Manual

REMINGTON H9100 PROluxe Rollers

remington-europe.com

Thank you for buying your new Remington® product. Please read these instructions carefully and keep them safe. Remove all packaging before use.

IMPORTANT SAFEGUARDS

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised. Keep the appliance and cable out of reach of children under 8 years.
  Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

• When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.

•  For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom*.

• Currently, the fitting in a bathroom of an electrical socket suitable or capable of operating the appliance is not permitted in the UK (see BS7671).

  • If the supply cord of this unit becomes damaged, discontinue use immediately and return the appliance to your nearest authorised Remington® service dealer for repair or replacement in order to avoid a hazard.
  •  Always ensure the voltage to be used corresponds to the voltage stated on the unit before plugging the appliance into the mains socket.
  •  Do not allow any part of the appliance touch the face, neck or scalp.
  •  Keep the power plug and cord away from heated surfaces.
  •  Do not leave the appliance unattended while plugged in.
  • Do not place the appliance on any soft furnishings.
  •  Do not use attachments other than those we supply.
  •  Do not set the appliance down while still on.
  •  Do not twist or kink the cable, or wrap it round the appliance.
  •  Do not use the appliance if it is damaged or malfunctions.
  •  Check the cord regularly for any sign damage.
  •  Always keep the lid closed while the rollers are heating.
  • Ensure there is a roller on each slot while the unit is heating and that each roller is properly inserted into the base unit.
  •  DO NOT USE ON ARTIFICAL HAIRPIECES OR WIGS.
  •  This appliance is not intended for commercial or salon use.

PARTS

1. Velvety flocked rollers
   8 x medium 25mm
   12 x large 32mm

2. Ceramic heated hinged clips

3.  Cool touch ends

4. On indicator light

5.  Base unit

INSTRUCTIONS FOR USE

•  Before use, ensure the hair is clean, dry and tangle-free.
•  For extra protection use a heat protection spray.
•  Hairsprays contain flammable material – do not use while using this product.
•  Section the hair prior to styling. Style the lower layers first.
•  Plug the product into the mains power supply.
• The on indicator light will glow once plugged in indicating that the rollers are on.
• CAUTION: the appliance will begin to heat-up as soon as the power supply is switched on.
• The lid should remain closed until the rollers are ready to use.
•  Rollers will be ready in approximately 90 seconds. Allow 3 to 5 minutes for best results.
•  When you feel your setters are ready, open the lid for 1 minute and begin use.

TO CURL

1. Starting with the lower sections of hair, take a section the width of a roller.
2. Start by using the medium sized rollers. Slide the roller up out of the base unit using the clip.
3.  Remove the clip from the roller.
4.  With the section of hair in one hand and the roller in the other, place the roller at the ends of the hair and wind the hair around the roller towards the root ensuring the hair is always taut.
5. Secure the hair in place using the clip.
6.  Repeat steps 3-5 until all of your hair is in rollers.
7. Let the hair cool for approximately 5-10 minutes to achieve long lasting styles.
8. For best results ensure the large rollers are used on the top sections of hair.
9.  Whilst the hair is cooling, unplug the rollers from the mains and allow to cool.
10.  When you feel ready, remove the rollers from the hair, hold the roller in one hand and remove the clip with the other.
11.  Gently and slowly unwind the hair from the roller.
12.  Once the roller is removed from the hair, place the clip onto the roller and store back in the base unit.
13.  Repeat this process until all rollers are removed.
14.  Once all rollers are removed, gently tease out the curls with your hand or a brush for a more natural finish.
15.  Once the unit has cooled, wrap the cord around the unit and store away.

CLEANING AND MAINTENANCE

•  Unplug the appliance and allow to cool.
• Wipe all the surfaces with a damp cloth.
• Don’t use harsh or abrasive cleaning agents or solvents.
• Dry rollers completely before replacing in the unit.

RECYCLING

To avoid environmental and health problems due to hazardous substances, appliances and rechargeable and non-rechargeable batteries marked with one of these symbols must not be disposed of with unsorted municipal waste. Always dispose of electrical and electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/collection point.

References

• Remington - EST. NEW YORK 1937 | Haircare & Personal Care Appliances for Men & Women
• Product Registration | Remington
• Remington, UK | Haircare & Personal Care Appliances for Men & Women
• Remington, UK | Haircare & Personal Care Appliances for Men & Women
• Product Registration | Remington

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>