BLUETOOTH DELUXE
CLUB REVOLUTION CYCLE
AMZ-955BK-BT

IMPEX®INC.
2801 S. Towne Ave., Pomona, CA 91766
Tel: 800-999-8899 Fax: 626-961-9966
www.marcypro.com
support@impex-fitness.com

BEFORE YOU BEGIN

Thank you for selecting the CIRCUIT FITNESS Bluetooth Deluxe Club Revolution Cycle by IMPEX® INC. For your safety and benefit, read this manual carefully before using the bike. As a manufacturer, we are committed to providing you with complete customer satisfaction. If you have any questions or find there are missing or damaged parts, we guarantee your complete satisfaction through direct assistance from our factory. To avoid unnecessary delays, please call our TOLLFREE customer service number. Our Customer Service Agents will provide immediate assistance to you.
Toll-Free Customer Service Number
1-800-999-8899
Mon. – Fri. 9 a.m. – 5 p.m. PST
www.marcypro.com
support@impex-fitness.com

IMPORTANT SAFETY NOTICE

PRECAUTIONS
This exercise bike is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your bike. In particular, note the following safety precautions:

1. Keep children and pets away from the exercise bike at all times. DO NOT leave children unattended in the same room with the bike.
2. Only one person at a time should use the bike.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the bike on a clear, leveled surface. DO NOT use the bike near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the bike. Running or aerobic shoes are also required when using the bike.
7. Use the bike only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer.
8. Do not place any sharp object around the bike.
9. Disabled people should not use the bike without a qualified person or physician in attendance.
10. Before using the bike to exercise, always do stretching exercises to properly warm up.
11. Never operate the bike if it is not functioning properly.
12. Read all warnings posted on the exercise bike.
13. Inspect the exercise bike for worn or loose components prior to use. Tighten/replace any loose or worn components prior to use.
14. Care should be taken in mounting or dismounting the exercise bike.
15. This exercise bike is for consumer and home use only.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT  FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS.

WARNING LABEL PLACEMENT

The Warning Labels and Caution Labels is shown here have been placed on the Rear Stabilizer and Main Frame. If the labels are missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the labels in the location shown.

HARDWARE PACK

COMPONENTS FOR ASSEMBLY

ASSEMBLY INSTRUCTION

• Tools Required For Assembling the Bike: One Crossing Wrench and Allen Wrench, provided by the manufacturer.
• NOTE: It is strongly recommended that two or more people assemble this bike to avoid possible injury.

STEP-1
A.) Attach the Front Stabilizer (#2) and Rear Stabilizer (#3) to the Main Frame (#1). Secure it with two M10 x ¾” Allen Bolts (#28), two Ø ⅔” Lock Washers (#29), and two Ø ⅔” Curved Washers (#30).

Note: The Stabilizers can be adjusted (by twisting the leveler adjuster

37) to ensure the bike is stable.

STEP 2
A.) Insert the Seat Support Frame (#4) into the Main Frame and install a Lock knob (#16) into the Main Frame to secure the Seat Support Frame at the desired height.

STEP 3
A.) Insert the Seat Support (#5) into the Seat Support Frame and lock in with Lock Knob (#15) at the desired position.

STEP 4
A.) Install the Seat (#9) onto the Seat Support.
B.) Tighten the hex nuts with the provided Multi-Wrench.

STEP 5
A.) Insert the Handlebar Support (#7) into the Main Frame. Install a Lock Knob (#16) and lock the Handlebar Support into the desired height.

STEP 6
A.) Install the Handlebar (#8) onto the Handlebar Support and secure with four Allen Bolts M8 x ⅔” (#31), four Ø ½” Lock Washers (#35) and four ؽ” Flat Washers (#38).

STEP 7
A.) Install the Bluetooth Sensor (#21) by inserting and locking in the Bluetooth Sensor unit into the sensor holder on the Left Crank (#32L).

STEP 8
A.) Install the pedals in the below fashion:
a. Part #33L will be threaded onto Part #32L in a COUNTER-CLOCK direction.
b. Part #33R will be threaded onto Part #32R in a CLOCKWISE direction.
c. Installing the Water Bottle Holder (#17) using two Pan Head Philips SelfTapping Screws (#39).

EXPLODED DIAGRAM

AMZ-955BK-BT PARTS LIST

PART
NO.| DESCRIPTION| SPEC.| QUANTITY
---|---|---|---
1| Main Frame| | 1
2| Front Stabilizer| | 1
3| Rear Stabilizer| | 1
4| Seat Support Frame| | 1
5| Seat Support| | 1
6| Locking Bracket| | 1
7| Handlebar Support| | 1
8| Handlebar| | 1
9| Seat| | 1
10| Brake Assembly| | 1
11| Seat Support End Cap| | 2
12| Stabilizer End Cap| | 4
13| Seat Support Frame Sleeve| | 1
14| Handlebar Support Sleeve| | 1
15| Lock Knob| | 1
16| Lock Knob| | 2
17| Water Bottle Holder| | 1
18| Hex Bolt| M8 x 1½”| 2
19| Aircraft Nut| M8| 2
20| Threaded Stop Washer| Φ15| 2
21| Bluetooth sensor| | 1
22| Chain Cover| | 1
23| Chain Cover Housing| | 1
24| Transport Wheel| | 2
25| Flywheel Cover| | 1 set
26| Flywheel| | 1
27| Brake Pad| | 1
28| Allen Bolt| M10 x ¾“| 4
29| Lock Washer| Ø⅔”| 4
30| Curved Washer| Ø⅔”| 4
31| Allen Bolt| M8 x ⅔”| 4
32| Crank| | 1 set（L\R）
33| Pedals| | 1 set（L\R）
34| Brake Pad Plate| | 1
35| Lock Washer| Ø ½”| 4
36| Leveler Lock| | 2
37| Leveler| | 4
38| Flat Washer| Ø ½”| 4
39| Flat Head Philips Self-Tapping Screw| ST4.2 x ⅔”| 2
40| Pan Head Philips Self-Tapping Screw| ST4.2 x ⅔”| 4

CARE, MAINTENANCE, AND STORAGE

1. Inspect and tighten all parts each time you use the bike. Replace any worn parts immediately.
2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents.
3. Store the bike IN-DOOR. Excess moisture and water would cause rust on the frame.
4. The Bike shall be placed at least 24 inches away from the wall or/and any other object such as furniture to provide safe access to and passage around the bike.
5. To avoid possible injury, the help of two or more people is needed when moving the bike around.
6. Disposal Instructions – The equipment can be safely disassembled and disposed of without unreasonable hazards. Call your local recycling agency regarding details of recycling.
7. The maximum user weight is 300 lbs.
8. Assembled Dimension: 45” x 20” x 45.5”.

OPERATING NOTES

ADJUSTMENT

1. Use the Tension/Brake Knob (#10) to adjust the resistance for exercises.
2. The seat height adjustment is in approximately 1.5” increment.
   *The seat height can be adjusted for multiple heights; ranging from 35” to 41”.
3. Loosen and pull out the Lock Knob (#16). Slide the Seat Support Frame/ Handle Bar support to the desired height and lock at the position by fastening the Lock Knob
4. Loosen and pull out the seat Lock Knob (#5). Slide the Seat Support to the desired position and lock at the position by fastening the seat Lock Knob.

Stopping the Exercise

1. Press down the Tension/Brake Knob (#10) to stop the flywheel. ONLY when the flywheel has stopped, will it be safe to remove feet from pedals.
2. DO NOT stop pedaling: doing so could result in serious injury.
3. DO NOT attempt to stop the Fly Wheel by hands, feet, or any other device not indicated in this instruction.

TRANSPORT
The Bike has a pair of Roller Wheels on the Front Stabilizer. To move, carefully tilt the cycle forward, and then roll.

PAIRING WITH KINOMAP

1. Install and start the Kinomap App. (App can be found in Apple’s App Store and Android’s Play Store.)
2. Register and log into Kinomap if you have not already done so.
3. Turn on your Bluetooth on your phone. (See your phone instructions on how to turn on your Bluetooth.)
4. Go into Bluetooth Pairing mode. (See your phone instructions on how to turn on your Bluetooth.)

| |
---|---|---
5. Select “More” to enter setup.| 6. Click on “Equipment Management”| 7. Click on the “+” to add the bike.
| |
8. Select the “bike” icon to begin.| 9. Select the Circuit Fitness icon.| 10. Select the “AMZ-955BK-BT” tab.
| |
11. Select the bike to pair.| 12. Click “Add” to complete pairing.| 13. Pairing Successful.

14. For More information on how to use KINOMAP, please visit www.kinomap.com.

EXERCISE GUIDELINES

Using your Bike will provide you with several benefits, it will improve your physical fitness, tone muscle and in conjunction with calorie controlled diet help you lose weight.

1. The Warm-Up Phase
   This stage helps get the blood flowing around the body and the muscles working properly. It will also reduce the risk of cramps and muscle injury. It is advisable to do a few stretching exercises as shown below. Each stretch should be held for approximately 30 seconds, do not force or jerk
   your muscles into a stretch – if it hurts, STOP.
   

2. The Exercise Phase
   This is the stage where you put the effort in. After regular use, the muscles in your legs will become more flexible. Work to your targeted heart rate but it is very important to maintain a steady tempo throughout. The rate of work should be sufficient to raise your heartbeat into the target zone shown on the graph below.
   
   This stage should last for a minimum of 12 minutes though most people start at about 15-20 minutes

3. The Cool Down Phase
   This stage is to let your Cardio-vascular System and muscles wind down. This is a repeat of the warm-up exercise e.g. reduce your tempo, continue for approximately 5 minutes. The stretching exercises should now be repeated, again remembering not to force or jerk your muscles into the stretch. As you get fitter you may need to train longer and harder. It is advisable to train at least three times a week, and if possible space your workouts evenly throughout the week.

MUSCLE TONING

To tone muscle while on your bike you will need to have the resistance set quite high. This will put more strain on our leg muscles and may mean you cannot train for as long as you would like. If you are also trying to improve your fitness you need to alter your training program. You should train as normal during the warm-up and cool-down phases, but towards the end of the exercise phase, you should increase resistance making your legs work harder. You will have to reduce your speed to keep your heart rate in the target zone.

WEIGHT LOSS

The important factor here is the amount of effort you put in. The harder and longer you work the more calories you will burn. Effectively this is the same as if you were training to improve your fitness, the difference is the goal.

IMPEX® INC.

LIMITED WARRANTY

IMPEX ® Inc. (“IMPEX”) warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX’s obligation under this Warranty is limited to replacing or repairing,at IMPEX’s option.
All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer Service Department at 1-800-999-8899. All freight for products returned to IMPEX must be prepaid by the customer. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an IMPEX authorized service center or for products used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by IMPEX.
IMPEX is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Register on-line www.marcypro.com

IMPEX® INC.
2801 S, Towne Ave.
Pomona, CA 91766

ORDERING REPLACEMENT PARTS
Replacement parts can be ordered by calling our Customer Service Department toll-free at 1-800-999-8899 during our regular business hours: Monday through Friday, 9 am until 5 pm Pacific standard time.
support@impex-fitness.com
When ordering replacement parts, always give the following information.

1. Model
2. Description of Parts
3. Part Number
4. Date of Purchase

© IMPEX INC.
www.marcypro.com

References

• Fitness.com
• Kinomap
• Get the Best Home Exercise Equipment / Marcy Pro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>