OZARKE Black Tie Crystal Chandelier Instruction Manual
- July 30, 2024
- OZARKE
Table of Contents
OZARKE Black Tie Crystal Chandelier
Thank you for shopping with Ozarké, we appreciate your business. Our goal is to provide excellent customer service before, during, and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at info@ozarke.com and one of our customer service reps will reach out to assist you.
Before you get started
When working with electrical wiring, follow these safety instructions to prevent injury or damage:
- Turn off the power: Before starting any work, turn off the power to the area you will be working in.
- Use appropriate tools: Only use tools designed for electrical work and in good condition.
- Wear protective gear: Wear safety glasses, gloves, and other protective gear as necessary.
- Power test: Use a non-contact voltage tester to check for electrical current before touching any wires.
- Avoid wet conditions: Do not work with electrical wiring in wet conditions.
- Keep a safe distance: Stay away from exposed wires or electrical components.
- Seek professional help: Consult a qualified electrician if you are unsure about any aspect of electrical wiring or encounter any problems.
WARNING!
- Do not use the power supply beyond the specified range (100-240V,50Hz).
- Avoid scratching the surface and wires of the lamp during installation.
- Do not install the lamp outdoors.
- The lamp should not be close to corrosive chemical objects or gases. It should not be washed with water. It can only be wiped with a clean soft cloth.
Installation Instructions
Instructions
- Use expansion screws to fix the hanging board to the load-bearing ceiling.
- Refer to the drawing to assemble the lamp frame.
- Process the circuit to test if the lamp works properly.
- Turn off the power and hang the lamp frame on the ceiling.
- Turn on the light again to ensure the lamp is working properly.
- Hang the crystal according to the drawing, following the principle of first up, then down, first in, then out.
- Hanging plate
- Screw for plate
- M6 Nut
- Inner M6 screw Nut
- Expansion screw
Read User Manual Online (PDF format)
Loading......