socket mobile DW940 Dura Scan Wear User Guide

: July 31, 2024
: socket mobile

Table of Contents

INSTALLATION INSTRUCTION
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

socket mobile DW940 Dura Scan Wear

socket mobile DW940 Dura Scan Wear

INSTALLATION INSTRUCTION

Step 1 : Prior to first use, fully charge your barcode scanner.

Use a USB-C wall charger (not included) to charge the device until the battery light turns solid green.

Note that it can take up to 8 hours to reach a full charge.
Product overview

Charging Requirements: Min 5.0 VDC, 1 AMP Max 5.5 VDC, 3 AMPs

Important: Do not charge Socket Mobile data readers in temperatures above 100°F/40°C, as the reader may not charge properly.

****Charging from a computer or laptop USB port will not provide enough power and could cause charging, connection or scanning performance issues.

Step 2 : Download the Socket Mobile Companion app to set up your barcode scanner.

Scan QR Code with your device to download the free Companion app

QR Code | Symbol |
---|---|---

Step 3: Register your reader and complete a user survey via the Socket Mobile Companion app to activate a 90-day warranty extension.

If the Companion app cannot be installed, use the steps below to pair your barcode scanner directly to the host device.

Note: These steps assume this is a first-time pairing setup.

Turn off Bluetooth on host device.
Tower on the barcode scanner.
Select and scan a Bluetooth connection mode barcode from the list below.
On host device – turn Bluetooth back on and pair barcode scanner.
Launch desired application.

You are now ready to start scanning!

For a complete user guide: https://sckt.tech/downloads

step 4 : Secure sleeve over your glove.

The product is designed to be used in conjunction with a glove of your choice.
Secure sleeve over your glove.

Step 5: Position the scan button holder on your index finger where it’s easily accessible by your thumb. Use the Velcro to form a ring, allowing you to slide it on and off your index finger easily. (We recommend trimming any excess material.)
Installation Instruction

Step 6 : Secure the scan module on the sleeve’s Velcro and connect the scan button to the scan button holder. Press the scan button to initiate scanning. You are now ready to scan barcodes.
Installation Instruction

Step 7 : If you would like to use the reader on your left hand, you will need to reposition the trigger arm.

Unscrew the trigger arm from the bottom case.
Move the trigger button from the right side to the left side.
Screw the trigger arm back onto the bottom case.

Alternative options to consider:
Option 1: If you regularly need to remove the wearable scanner during your workday, consider sewing the Scan Button holder onto your glove at an optimal scanning location. This eliminates the need to repeatedly slip the ring with the Scan button holder on and off.
Installation Instruction

Option 2 : If you frequently need to remove your working gloves during the day, we suggest sewing the Scan button holder directly onto your glove and attaching the provided Velcro to the back. This setup ensures the wearable scanner is always ready and allows for quick and easy removal and reattachment.
Installation Instruction

Need help? Visit https://sckt.tech/support
For device set-up: https://sckt.tech/device-set-up

Bluetooth Connection Modes

**iOS Application Mode (Default)

Use this mode with an Apple app designed for Socket Mobile barcode scanners|
Android/Windows Application Mode

Use this mode with an Android or Windows app designed for Socket Mobile barcode scanners|
Basic Keyboard Mode
** Symbol
Configures the barcode scanner to Human Interface Device (HID).| Bar
Code

Need help? Visit https://sckt.tech/support
For device set-up: https://sckt.tech/device-set-up

Revert all settings to factory defaults. The barcode scanner will power off after scanning this barcode| Bar Code
---|---

Add Socket Care extended warranty coverage:
https://sckt.tech/socketcare

Purchase SocketCare within 60 days from the date of purchase of the barcode scanner. Product Warranty: The barcode scanner’s warranty period is one year from the date of purchase. Consumables such as batteries and charging cables have a limited warranty of 90 days. Extend your barcode scanner’s standard one-year limited warranty coverage up to five years from the date of purchase. Additional service features are available to further enhance your warranty coverage:

Warranty period extension only
Express Replacement Service
One-Time Accidental Coverage
Premium Service

Environment
Socket Mobile is committed to combating global climate change. We back up this commitment with sensible, sustainable policies
dedicated to achieving tangible results. Learn about the specifics of our environmental practices here: https://sckt.tech/recycling
Important Information – Safety, Compliance and Warranty

Safety and Handling
See Safety and Handling in the User Guide: https://sckt.tech/downloads

Regulatory Compliance
Regulatory information, certification and compliance marks specific to the Socket Mobile barcode scanner are available in Regulatory Compliance: socketmobile.com/regulatory-compliance.

IC and FCC Compliance Statement
This device complies with Industry Canada license exempt RSS standard(s). This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may cause interference, and (2) this device must accept any interference, including interference that may cause undesired operations.

EU Compliance Statement
Socket Mobile hereby declares that this wireless device is in compliance with the essential requirements and other relevant provisions. Products intended for sale within the European Union are marked with a CE Mark, which indicates compliance to applicable Directives and European Normes (EN), as follows. Amendments to these Directives or ENs are included: Normes (EN), as follows:

CONFORMS TO THE FOLLOWING EUROPEAN DIRECTIVES

Low Voltage Directives: 2014/35/EU
RED Directive: 2014/53/EU
EMC Directive: 2014/30/EU
RoHS Directive: 2015/863
WEEE Directive: 2012/19/EC

Battery and Power Supply
The barcode scanner contains a rechargeable battery which may present a risk of fire or chemical burn if mistreated. Do not charge or use the unit in a car or similar place where the inside temperature may be over 60 degrees C or 140 degrees F.

Limited Warranty Summary
Socket Mobile Incorporated warrants this product against defects in material and workmanship, under normal use and service, for one (1) year from the date of purchase. Products must be purchased new from a Socket Mobile authorized distributor, reseller or from the Socket Store on Socket Mobile’s website: socketmobile.com. Used products and products purchased through non-authorized channels are not eligible for this warranty support. Warranty benefits are in addition to rights provided under local consumer laws. You may be required to furnish proof of purchase details when making a claim under this warranty.

For more warranty information: https://sckt.tech/socketcare

Symbols