ASUS BNUC13BRKP2 NUC 13 Pro Kit Board Mini PC User Guide
- July 29, 2024
- Asus
Table of Contents
ASUS BNUC13BRKP2 NUC 13 Pro Kit Board Mini PC
ASUS NUC 13 Pro Kit/Board/Mini-PC
Specifications
- Board Dimensions: 146mm x 101.7mm
- Max Chassis Dimensions
- Slim Chassis: 174mm x 108mm x 25.9mm (+3.4mm rubber feet)
- Tall Chassis: 174mm x 108mm x 35.8mm (+3.4mm rubber feet)
- Processor: Alder-Lake-N processor
- Memory: Tested memory details available at ASUS Support
- Graphics: Supports HBR Dolby TrueHD and DTS-HD Master Audio over HDMI
- Storage
- One M.2 PCIe x2 connector supporting M.2 22×80 (key type M) for NVMe only
- One 64GB eMMC
- Communication: USB Ports and Headers
- Power: Operating Temperatures, BIOS, Supported Operating System, Hardware Monitor Subsystem
- Additional Features
- MIPI Camera support
- HDMI CEC API available
- Sustained Operation
- Auto RTC Reset
- Delayed AC Start
- Reflectivity Kensington Security Slot
- Cable Locking Arm
- LED Status Indicators
Product Usage Instructions
Assembly
Follow the assembly instructions provided in the Quick Start Guide for your
specific kit/board/mini-PC model.
Powering On
Connect the power plug according to your country code (US, CN,EU) but note
that all power plugs may not be included in the box.
Mounting Options
Choose from optional VESA mounting, DIN rail mounting, or cable tie
mounting based n your installation requirements.
Frequently Asked Questions (FAQ):
-
Q: Where can I find information about the USB ports and headers?
- A: More details about the location/pinout of the USB ports and headers can be found in Section 3.6.3 of the user manual.
-
Q: How do I enable HDMI CEC functionality?
- A: HDMI CEC functionality can be enabled in the BIOS settings. Refer to the user manual or visit the link provided for more information on the HDMI CEC API specification.
ASUS NUC 13 Pro Kit/Board/Mini-PC
NUC13BRKP2 / NUC13BRBP2 / NUC13BRBA4 / NUC13BRFA2 / NUC13BRFA4
Quick Start Guide
- NUC13BRK (Slim Kit)
- NUC13BRF (Tall Kit)
- NUC13BRB (Board)
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Optional
VESA Mounting
DIN Rail Mounting
Cable Tie Mounting
Specification
| Board Dimensions | 146mm x 101.7mm |
|---|---|
| Max Chassis Dimensions | Slim chassis: 174mm x 108mm x 25.9mm (+3.4mm |
rubber feet) Tall chassis: 174mm x 108mm x 35.8mm (+3.4mm rubber feet)
Processor| ASUS NUC 13 Rugged Boards and Kits have a soldered-down
Alder-Lake-N processor from the list below.
- Intel® Processor N50 (Config A)
- Intel Atom® Processor X7211E (Config B)
- Intel Atom® Processor X7425E (Config C)
More information about Intel® processors can be found at https://ark.intel.com
Memory| 1 x Single Channel DDR5-4800 SODIMM
- Support for In-band ECC capability.
- With 8Gb or 16 Gb capacity
More information about tested memory can be found at https://www .asus. com/suppor t/
Graphics| Integrated graphics support for processors with Intel® Graphics Technology
- Supports up to dual 4K@60Hz display or dual 1080@60Hz (2 x HDMI 2.1 TMDS)
- HDR (High Dynamic Range) support
- Dual display pipes – supporting blending, color adjustments, scaling, and dithering.
- Support for HDCP 2.3
- Codecs supported are detailed on http://www.intel.com/graphics
- Support Headless, 2nd Virtual Display and Persistent Display Mode Operation
Audio
| The processor supports the following audio formats over HDMI*: HBR Dolby TrueHD and DTS-HD Master Audio
More information about software and drivers can be found at https://www.asus.com/support/Download-Center/
Storage| One M.2 PCIe x2 connector supporting M.2 22×80 (key type M) for
NVMe only. One 64GB eMMC
Communication| Intel® Wi-Fi 6E1 AX210 (Gig+) M.2 2230 add-in card via
M.2 2230 (key type E) connector
- 802.11ax R2 2×2, both with 160Mhz channel support + Bluetooth v5.3
- Maximum transfer speed up to 2.4 Gbps
- Supports PCIe and USB
More information about Intel® wireless products can be found at https://ark.intel.com To obtain drivers visit https://www.asus.com/support/Download-Center/
Dual 2.5 Gigabit (10/100/1000/2500 Mbps) Ethernet ports
- Intel® Ethernet Controller I226-V (SKU Dependent)
- Intel® Ethernet Controller I226-LM (SKU Dependent)
- Single-port integrated multi-gigabit (up to 2.5G) – standard IEEE 802.3 Ethernet interface for 2500BASE-T, 1000BASE-T, 100BASE-TX, 10BASE-TE connections (IEEE 802.3, 802.3u, 802.3bz, and 802.3ab)
- Full wake up support (S4 WOL not supported)
- Supports for packets up to 9.5 KB (Jumbo Frames)
More information about Intel® Ethernet controllers can be found at https://ark.intel.com
USB Ports and Headers| 2 x USB 3.2 Gen2 port (rear panel) 2 x USB 2.0 port (rear panel)
2 x USB 2.0 Headers (internal)
More information about the location/pinout of the USB ports and headers can be found in Section 3.6.3 later in this document.
---|---
Power| Power Adapter
- 65W adapter ADP 20V, 3.25A 3P DT VI
- 90W adapter ADP 20V, 4.5A 3P DT VI
- 90W adapter ADP 20V, 4.5A 3P DT VI Internal Power Header
- 4-pos/dual row (2×2) right-angled header Power Input
- 12VDC to 20VDC +/- 5% with DC voltage protection
Operating Temperatures|
- Intel® Atom® x7211E 0 – 50 °C External Ambient Temp
- Intel® Atom® x7425E 0 – 40 °C External Ambient Temp
- Intel® Processor N50 0 – 40 °C External Ambient Temp
BIOS| ASUS BIOS resident in the Serial Peripheral Interface (SPI) Flash
device
Support for Advanced Configuration and Power Interface (ACPI), Plug and Play
Supported Operating System|
- Windows 10 IOT-Enterprise LTSC 64-bit
- Ubuntu 22.04 LTS
- RedHat Enterprise Linux 9
- Windows 11 Pro 64-bit
Hardware Monitor Subsystem
| Hardware monitoring subsystem including:
Voltage sense to detect out of range power supply voltages. Thermal sense to detect out of range thermal values
Design for Rugged|
- Rated IP50
- Industrial Design
- Fanless
Additional Features
MIPI Camera| ASUS NUC 13 Rugged NUC13BR supports 2x MIPI CSI Camera
headers, which supports Vision Components or Paper Image off-the-shelf camera.
---|---
HDMI CEC API| Built-in support for HDMI CEC is available on both HDMI
ports, which may be enabled in the BIOS for display power control, as well as
via an API supporting other HDMI CEC functions.
More information about the HDMI CEC API specification is available on https://www.intel.com/content/www/us/en/suppor t/ar ticles/000056864/intel- nuc.html
Sustained Operation| Qualified for 24×7 sustained operation
Auto RTC Reset| A Real-Time Clock (RTC) reset is triggered after three
consecutive unsuccessful boot attempts.
Delayed AC Start| Short delay after AC power is applied before unit is
ready to power on to protect the system against voltage fluctuations in
environments where multiple devices are being powered on simultaneously
Reflectivity| All surfaces meet 20GE (20 Gloss Level/Gloss Units) of
shininess by measurement of Glanz
Kensington Security Slot| Available on the right side of the chassis
when viewed from the front
Cable Locking Arm| ASUS NUC Rugged PCs and Kits NUC13BR ship with a
cable locking arm on the back panel of the chassis. The cable locking arm
reduces stress on the power adapter cable in certain positions and prevents
unintended losses of power
LED Status Indicators| ASUS NUC 13 Rugged Kits feature three System
Status LEDS to represent overall boot health (useful for headless deployments)
as well as firmware/software robustness capabilities.
There are three Network Status LEDs representing overall network connectivity.
- Thunderbolt” Port
- HDMI Port
- USB 2.0 Port
- Ethernet Port
- Electric Power Inlet
- Anti-Theft Key Lock Hole
- USB 3.2 Port
- Headset|
- Power Button/LED
- Cable Locking Arm
Cable Locking Arm
All power plugs may not be included in the box.
Thunderbolt 4/USB 4 (type C)
For a list of tested components and operating systems supported, go to the following web site: https://www.asus.com/support/
For product support. ao to: https://www.asus.com/support/contact/troubleshootina/
To download the latest drivers and BIOS updates, go to: https://www.asus.com/support/Download-Center/
The operation of any wireless adapter other than the one installed, shall violate regulatory compliance requirements in your region.
Unless it is mentioned in the Integration Guide or Technical Product Specification, please do not try to repair your equipment. Always follow the instructions in the Integration Guide or Technical Product Specification.
COPYRIGHT INFORMATION
- No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
- ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
- Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
- SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Copyright © 2023 ASUSTeK COMPUTER INC. All Rights Reserved.
- LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY. SERVICE AND SUPPORT Visit our multi-language website at https://www.asus.com/support/ .
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>