rizoma PM331 Slider Pad Mounting Kit User Manual
- July 27, 2024
- rizoma
Table of Contents
rizoma PM331 Slider Pad Mounting Kit
Product Information
Specifications
- Product Name: Rizoma Slider Pad Mounting Kit
- Model Number: PM331
- Manufacturer: Rizoma
Product Usage Instructions
Installation
- Read and understand the user manual thoroughly before installation.
- Ensure all fastenings are done after correctly positioning the accessories without forcing any moving parts.
- Check compatibility with your motorcycle and other aftermarket accessories.
- For any doubts, contact an authorized Rizoma dealer.
Maintenance
- Regularly inspect the Rizoma products for any signs of damage like leaks, bends, cracks, etc. If any damage is detected, have a Rizoma dealer inspect it before further use.
- Do not attempt to repair or modify the products yourself.
Safety Precautions
- Always wear appropriate protective equipment when working on your motorcycle.
- Make sure the motorcycle is stable before starting any work to prevent accidents.
FAQ
- Q: What should I do if I notice my Rizoma product is damaged?
- A: If your product shows any signs of damage, such as leaks, bends, cracks, or wear, contact a Rizoma dealer for inspection before using the product again.
- Q: Can I modify or repair Rizoma products on my own?
- A: No, it is recommended to always replace damaged components with original Rizoma parts and not attempt repairs or modifications on your own.
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking, bent, deformed, cracked, chipped or worn, no matter how slight,
immediately have a RIZOMA dealer inspect the products before you ride again.
In any case never try to repair or modify the Rizoma products or their
components, always replace them with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other
aftermarket equipment installed before. For your safety, Rizoma suggests to
always contacting your RIZOMA dealer.
Slider pad mounting kit
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Complete the assembly of the one side before starting the disassembly of the other side. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.
WARNING: TO CLEAN YOUR PRODUCT DON’T USE DETERGENT, AGGRESSIVE PRODUCTS, OR ABRASIVE SPONGES THAT CAN DAMAGE OR SCRATCH YOUR PRODUCT, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
RIMUOVERE VITE ORIGINALE DX REMOVE RH ORIGINAL SCREW
Step 1
Warning: remove the original screw only when the engine is switched off and cold. When disassembling, be careful as the engine may sag.
MONTAGGIO LATO DX INSTALL RH SIDE
Step 2
RIMUOVERE VITE ORIGINALE SX REMOVE LH ORIGINAL SCREW
Step 3
Warning: remove the original screw only when the engine is switched off and cold. When disassembling, be careful as the engine may sag.
MONTAGGIO LATO SX INSTALL LH SIDE
Step 4
Warnings
- RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice.
- Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
- The action depicted is performed by professionals under strictly controlled riding conditions.
- Only you know the limits of your riding ability and only you can control the conditions under which you ride.
- By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the
- Courts of Busto Arsizio, Italy.
- All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full-finger gloves, boots, and body armor.
- Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other parts installed on your motorcycle.
- Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal notes
- Some of our products may not be approved for road circulation in the countries where homologation is required.
- Thus RIZOMA® srl declines any responsibility for a different use of its products.