IJOY 0613 Over Ear Wireless Headsets User Guide

IJOY 0613 Over Ear Wireless Headsets

Product Information

Specifications:

• Bluetooth and TF mode support
• Maximum and minimum volume settings
• Low battery prompts with red LED flashing
• Power button to turn off the headset

Product Usage Instructions

Charging the Headset:
Before using the headset for the first time, charge it for at least 2 hours.

Basic Instructions:
To turn the headset off, switch the power button to the left.

Pairing the Device:

1. You will hear a prompt when turning on the headset. The Blue LED will indicate powering on.
2. If re-pairing with the last device, wait for the process to complete. If not, it will enter Bluetooth pairing mode with red and blue flashing lights.
3. The headset is named IJOY LOGO. If a PIN is requested, enter “0000”.

LED Indicator:
The LED will indicate different statuses as mentioned above, including power on, pairing mode, and low battery alerts.

Safety Information:
Follow the safety precautions mentioned in the user manual to ensure the safe usage of the headset.

Headset Button Functions:

• Short press for Next Track/FM station change
• Hold the button for Volume Up adjustment

FAQ:

Q: What should I do if the headset does not pair with my device?
A: Make sure the headset is in Bluetooth pairing mode (flashing red and blue lights) and try again. Ensure that the PIN entered is “0000” if required.

Features and Specifications

• Driver: 40mm
• Impedance: 320
• Speaker Rated Power: 20mW
• Frequency Range: 20Hz-20KHz
• Sensitivity: 110dB+/-3dB
• Distortion: S1%At 1KHz
• S/N: ≥75dB
• Power Supply: USB, DC 5V= 500mA
• Battery Capacity: 300mAh
• Battery Play Time: >1 O hrs
• Battery Charging Time: 1.5 hrs
• Product Size: 182x180x78mm
• Product Weight: 200g

Package Contents

• Wireless Headset IJOY LOGO
• User Manual
• USB to Type-C cable
• 3.5mm Audio cable

Charging the Headset

Before using the headset for the first time Charge for at least 2 hours.

• Plug the Type-C cable into the port on the headset
• Plug the opposite, USB end into the USB port on a computer or compatible AC adapter.
• The red LED will turn on to indicate that the unit is charging
• Once fully charged, the red LED will turn to blue.

Basic Instructions

• To turn the headset on, switch the power button in the right direction.
• The headset will prompt and the blue LED will turn on.
• The blue LED will flash every second while playing music in Bluetooth or TF mode.
• Support battery indication icon on 10S &Android.
• Maximum & minimum volume warning prompts.
• Low battery prompts with red LED flashing.
• To turn the headset off, switch the power button to the left direction.

Pairing the Device

• Place headset within 30 ft from Bluetooth-enabled device
• Switch the power button to the right direction to turn on the headset You will hear a prompt. The blue LED will turn on and then start to repair the last device. If it can not pair for 2 seconds, it will flash quickly with red and blue to indicate Bluetooth pairing mode.
• Follow the instructions on your device to search for the headset.
• The headset is called “IJOY LOGO”. If a PIN is required, enter “O 000”.
• The LED will turn to blue when pairing is complete.

LED Indicator

• Charging: red LED on
• Fully Charged: blue LED on
• Pairing Mode: blue and red LED alternating flash
• Connected: blue LED on
• Playing: blue LED will flash every second

Safety Information

• If no pairing connection after the headset enters the pairing mode, please turn off the headset to save power.
• Do not perform other operations while pairing the headset to prevent the program error.
• Please select a proper volume while using it to prevent damage to your ears.
• Please note that a good environment for using the headset can avoid damage to the headset.
• Please charge the headset after a long time none-use.

Caution

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
• This device and its antenna must not be co-located or operate in conjunction with any other antenna or transmitter.

Headset Button Functions

• Short press for PLAY/ PAUSE/ Phone Answer/ Hang OFF and search FM while in FM mode.
• Short press twice to Redial’s last number.
• Hold on the button to Reject Phone Calls while ringing.
• Short press for Previous Track/ FM station.
• Hold on to the button for Volume Down.
• Short press for Next Track/ FM station.
• Hold on to the button for Volume Up.
• Short press to switch play mode(Bluetooth/ FM mode/ TF mode).
• Hold the button to reset the headset into the pairing state.
• Short press to select six kinds of EQ experience.
• Switch to the right to turn the headset on and the left will turn it off.
• Plug in an aux-in cable to the Aux plug-in port to enjoy the music directly. All button functions will stop working under Aux mode
• Put a TF card into the TF card slot to play music directly.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

• FCC ID: 2AJQ7-LOGO

Distributed by Quest USA Corp.
495 Flatbush Ave, Brooklyn NY 11225

© GOIJOY & IJOY are registered trademarks of Quest USA Corp. All other trademarks and trade names are property of their respective owners. Designed by GOIJOY & IJOY in New York. All rights reserved Quest USA Corp.

Made in China.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>