BOMGE BT-58 Wireless Microphone Transmitter Instruction Manual
- July 27, 2024
- BOMGE
Table of Contents
BOMGE BT-58 Wireless Microphone Transmitter
Product Information
Specifications
- Product: Wireless Microphone System
- Receiver Operation: The indicator light shows different statuses
- Indicator Light Colors:
- Bright green – Switched on status
- Bright green (low pressure) – Receiver battery low state
- Red – Receiver working condition
- Usage: Ideal for amplifying audio wirelessly
Product Usage Instructions
- Ensure the receiver is powered off before proceeding. The indicator light will display different colors to indicate various statuses:
- Bright green: Indicates the receiver is switched on.
- Bright green (low pressure): Signifies a low battery level in the receiver. It is recommended to replace the battery at this point.
- Red: Shows that the receiver is in working condition.
- If the microphone is not audible, try re-matching the frequency operation. If the device will not be used for an extended period, remove the battery to prevent leakage that can damage internal electronic components.
- Ensure compliance with FCC regulations when using this wireless microphone system. Follow all guidelines provided in the manual.
FAQ
- Q: What should I do if the microphone is not producing sound?
- A: Try re-matching the frequency operation to ensure the proper functioning of the microphone.
- Q: How can I prevent damage to internal electronic components?
- A: If the device will not be used for a long time, make sure to remove the battery to prevent leakage that could harm the internal components.
Product Features
This product is designed with the most advanced wireless s digital transmission technology The signal transmission is greatly improved by the digitization of the RF signal and the digital transmission of audio signal The stability and confidentiality of the loss reduce the loss of transmission, the quality of sound quality can be connected lt is completely determined by the mi core to meet the demands of customers by changing the mi core. The RF signal contains 1 frequency and 1 random ids, and the microphone is the most ant interference b Strong and is true by any signals from the outside. Reach the first-class KTVroom acceptance Level. This product applies to a wide range of families leaching, meeting rooms, outdoor activities, K room, etc., with a single set of cartridges, with 6.35 plug or 3.5 inserts The sound equipment is compatible.
Hand-held, lumbar operation instructions
open/close handheld microphone: when the microphone is turned off, the power
button is pressed to turn it on. The power button is turned off when it is
switch hed on. Switching frequency: at the boot time,(frequency switch)is
shortened by the frequency of Switching, For each short press I’m going to
switch to a frequency point. Enter pairing: when the phone is shut off, hold
the power button)don’t let go. When the LED lights start flashing, release
your hand, and hand in The LED lights always flicker in pairs. Exit pairing:
shutdown exit: operate “ shutdown” (long press power button), Shutdown, exit
pairing. Switch operation exit: operate on “switch ng frequency”(short press
frequency switch), The microphone is switched to a normal launch state, and
the RF indicator of the receiver is lit, Low pressure indicator: the battery
capacity will soon run out when the battery symbol of the microphone is
flashing,S suggest changing the battery.
Description of receiver operation
According to the power off, the Indicator light is in a working condition: the indicator light is bright green when switched on Status), and the indicator light is bright green (low pressure working state of receiver battery, Suggest replacing the battery. The microphone is switched from bright green to red(receiver working condition)
Paired pair of frequency operation instructions
When the phone is shut off, hold the power button (power button+change key)at
the same time To release, when the LED lights begin to blink, release your
hand and go into the match In the state, where the LED lights are flashing,
The receiver is switched on and off when it is turned offThe receiver should
be switched on and off when the receiver is switched on After the machine, the
light of green power lamp changed to a red light for three times Green, short
press the microphone to make sure the receiver lamp turns red The opposite is
true. At this point, the handheld microphone is randomly selected in the set
of 48 frequency points Four frequencies, and four random ID codes, and
microphone interference is the strongest, with no Noise generated by any
signal interference from the outside world.
Note: when Mimi is not audible, please re-match The frequency operation. The machine will not be used for a long time, Please take out the battery Battery leakage, and damage internal electronic components.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>