BOMGE D Series Professional DJ and Studio Compact Mixer with USB Instruction Manual

BOMGE D Series Professional DJ and Studio Compact Mixer with USB

• 100% recycled paper
• 100% paper recycle

Supplementary notes

1. This mixer is a passive mixer and needs to be connected to active speakers. If you need to connect passive speakers, please connect the amplifier first.
2. If the specific problem persists, please contact the dealer or online customer service where you purchased it

4/6 Channel Mixer

Disclaimer
Since we are always committed to improving the quality of our products, we will keep updating them, so we reserve the right to change the specifications at any time without further notice.

User Manual For 4/6 Channel Mixer Studio & Record Mixer

Production Description

• The Mixer is a multi-purpose 4/6 channel mixer with a sound card and built-in BOMGE designed effect chips to meet users of Home Music Production, Brocasting, Live Streaming, Karaoke, Speech and etc. The mixer is light weight, can be directly connected to PC’s USB for power supply or sound signal transmission between PC and Mixer. The XLR plug and phone type plug can be connected what you want to use microphone or instrument Stereo input jack used to connect line-level instruments such as electronic keyboards and audio equipment. Two types of jacks are available: phone type and RCA pin type Low-noise on all microphones input Adjustable input signal, channel treble/bass tone, signal sizse, main output level, size of headset volume, echo repetition frequency and effect echo repeat time interval Monitor and effects paths as well as separate gain controls on all channel
• Headphones output with dedicated volume control Built-in +48Vphantom power for condenser Mic. The MP3 function keys to be witched LINE/BT/PC working status and turned loop play mode. The group of recording terminal ports for a stereo output connection to the recording interface.
  • Ultra convenient and compact design. -16 Echo and Delay DSP built in for Wide range of applications. (For D Series Mixer)
  • 24 DSP built in for F series Mixer to meet different application for Music.
  • Suitable for all kinds of people.
  • It can be connected to PC/Laptop through USB port as external sound card. -4/6 channel mixing console with 2/4 mono channels and 1 stereo tape channel AUX-bus main channel output One AUX output and backtrack 2- band EQ for each input channel Built-unprofessional reverb 2-bus electronic balanced display With input gain and high bass adjustment, built-in +48V phantom power, high-definition headset output port, MP3 broadcast Sound card function for the computer.
  • BT wireless steaming & USB/MP3 Display and Recording.

Channel Control Section

1. Mono input jack
   MIC/LINE:XLR plug and phone type plug can be connected. Connect what you want to use microphone / or instrument.

2. Stereo input jack
   Used to connect line-level instruments such as electronic keyboards and audio equipment. Two types of jacks are available: phone type and RCA pin type.

3. Phantom power switch
   Press down this switch, the 48V phantom power indicator will light up. Then supply the direct 48V phantom power to the MIC/L- INE port for the use of condenser mic.

4. 48V Phantom Power Switch
   Same as Section 3.

5. [GAIN]knob
   Used to adjust the gain of the input signal.

6. .CHIGH]knob
   Adjust the knob to control the channel treble tone.

7. [LOW]knob
   Adjust the knob to control the channel bass tone.

8. [EFX] knob
   Channel effect access button. Turn on this knob and it adds a natural spaciousness effect, make your voice more beautiful.

9. Signal Switching Button of USB MP3 Player and Channel 3 & 4

10. Press down the button, the signal connected to Channel 3 &4 is allowed to enter, then mixed domain output channel as well. At the time, the signals connected to USB MP3 is being cutting off. Otherwise, the signal that is from USB MP3 allowed to enter, then mixed to main output as well.

11. Channel Volume Knob
    Adjust the knob to control the channel signal sent to main output and earphone.

12. XLR type balanced output
    jacks that can output mixed stereo can be used to connect power amplifiers.
    Master Control Section

13. 13. Stereo output interface A6.35mm jack to support both balanced and unbalanced connections, used for the linking to the active speakers or power amplifiers

14. Headphone jack

15. MP3 USB jack

16. MP3 display Display MP3 operation control and playback status.

17. MP3 master key REC-button to start recording and pause, long press to end recording and automatically save and play the current recording clip, short press to end recording and save. MODE Function key, short press to switch LINE/BT /PC workings Tate, long press turn loop play mode.

18. DSP Selection Button DSP-:Select the last sound effect mode. DSP+: Select the next sound effect mode. For D series, it has 16 different Echo And Reverb analog effect. While F series it has 24 DSP. Please refer Page 5 to check the DSP List

19. The Signal output status display

20. Power indicator light 21. Effect Parameters Knob It is used to adjust the effect level sent from the Internal effector to the bus.

21. [PHONES] knob Headphone monitor volume adjustment, you can control the size of the headset volume.

22. [MAIN OUT] knob Main volume knob, which adjust the knob to make the main output level under ideal conditions.

23. Micro USB Power Supply Socket Can be connected to an external 5V power supply or computer USB interface. Once it connects to PC, make sure that you switch the working mode to PC(Section 25), working as external sound card. It can also use the power adapter or the movable power charge to supply power. The requirement is 5V/1A for 4 channel mixer, while 5V/2A for 6 channel mixer

24. Mp3/PC Mode Switch If the micro usb (Section 24) is connecting with PC/Laptop, this switch is to help for switching your MP3/PC working status. If the power supply is external for 5V power adapter, its working mode is only Mp3.

SPECIFICATION

Mixer connection diagram

How to use our mixer for webcasting?

1. Connect the audio device to the mixer according to the connection diagram above, and connect the mixer to the computer
2. Turn the PC-MP3 switch on the back of the mixer to the PC position.
3. pop the button up. (4 channel button name as”3/4 MP3″,6 channel name as “5/6 MP3”)
4. Turn the volume and gain knobs on each channel. At the same time, the volume master output and headphone master output can also be adjusted slowly until the sound remains clear.
5. Select the “Jiel-BR21 speaker” sound card in the computer as the sound source, and use the software for recording, live broadcasting, game, teaching and etc. (As the diagram shown below)

Use the mixer’s BT, USB for playback BT part

1. Turn the PC-MP3 switch on the back of the mixer to the MP3 position.
2. Press the “MODE” button to select the BLUE mode. If the audio mixer is not connected by the BT of the external device, the word “BLUE” will keep flashing on the screen.
3. Search for “BMG-24DSP” or “BOMGE” in the BT connection page of external device, select the connection, and the word “BLUE” on the mixer screen stops flashing
4. pop the button up.(4 channel button name as”3/4 MP3″, 6 channel name as “5/6 MP3”)
5. Turn the volume and gain knobs on channel 3/4 or 5/
6. At the same time, the volume master output and headphone master output can also be adjusted slowly until the sound remains clear.

USB part

1. Turn the PC-MP3 switch on the back of the mixer to the MP3 position.
2. Insert the U disk
3. Long press ” l+” ” 14/-” button to increase and decrease volume, short press to up and down tracks.
4. pop the button up. (4 channel button name as”3/4 MP3″, 6 channel name as “5/6 MP3”)
5. Turn the volume and gain knobs on channel 3/4 or 5/
6. At the same time, the volume master output and headphone master output can also be adjusted slowly until the sound remains clear.

Using the USB recording function of the mixer

1. Turn the PC-MP3 switch on the back of the mixer to the MP3 position
2. Insert the U disk
3. Short press the “REC” button, “REC” flashes, recording is in progress, short press “REC” again, the recording stops, and MP3 plays the recorded file 4. pop the button up
4. channel button name as” 3/4 MP3″, 6 channel name as “5/6 MP3”)
5. Turn the volume and gain knobs on channel 3/4 or 5
6. At the same time, the volume master output and headphone master output can also be adjusted slowly until the sound remains clear.

Use Music Player, Record player and other audio sources to input

1. Connect the audio source of the music player or record player. (as shown below)
2. Press down the buttons of 4 channels (3/4 MP3) and 6 channels (5/6 MP3).
3. Turn the volume and gain knobs on channel 3/4 or 5/6. At the same time, the volume master output and headphone master output can also be adjusted slowly until the sound remains clear.

How to adjust the DSP effect function of the mixer

1. Insert the Mic in channel input. (Here we use condenser mic for demo)
2. Press down the button of “+48V”. (Only for condenser microphone usage)
3. Turn the EFF knob on channel input, and also turn the Effect Program knob on.
4. Select the effect by pressing buttons of “DSP-” and “DSP+” according to effect preference.
5. Turn on the volume and gain on channel input, at the same time, the volume output and earphone main output can be also adjusted slowly until the sound remains clear.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>