Onn. WIABLK100007907 2-in-1 Wireless Charging Pad User Manual

July 26, 2024
Onn.

Onn. WIABLK100007907 2-in-1 Wireless Charging Pad User Manual

What is in the box?

  1. 5W Qi Wireless Charging Pad with Apple Watch Charging Stand
  2. A 12W AC adapter with a 5-ft Cable
  3. Additional ring for Apple Watch Charger
  4. User Manual

Get to know your 5W Qi Wireless Charging Pad with Apple Watch Charging Stand

Compatibility

  1. Qi-enabled devices to charge up to 5W on the pad
  2. Any Qi-compatible smartphones or devices
  3. Apple watch series 1, series 2, series 3, series 4, series 5

How to charge your devices

  • Connect the Apple Watch charger to the charging stand.
  • Apple Watch charger sold separately. ” Additional ring is not included.
  • The ring on the charging stand can be removed and replaced with another ring for different sizes of Apple Watch.
  • Insert the USB connector of the Apple Watch charger into the built-in USB A port.
  • Put the Apple Watch charger through the ring of the charging stand.

Connect 12W AC Adapter with Charging Pad
Insert the power barrel connector into the connecting port of the charging pad

Connect to Power Supply
Plug in a 12W AC adapter into a power outlet for power supply

  • Begin to charge
  • Remove any foreign object (if any)
  • Example: Magnet or holder

If there is any foreign object detected, an LED indicator will be flashing.

  • A thick protective case of 5mm or a case that includes a magnet or metallic material, may not allow proper charging function.
  • Do not place any credit card on the charging device.
  • Place your smartphone or any Qi-enabled device on the center of the charging pad, and make sure to cover it.
  • Allow charging any Qi-enabled device and Apple
  • Watch at the same time
  • Apple Watch charger is not included
  • The LED indicator will be on continuously during charging.

Caution

  • Avoid dropping
  • Do not disassemble
  • No metal objects between devices and the wireless charging stand
  • A thick protective case of 5mm or a case that includes a magnet or metallic material, may not allow proper charging function.
  • Keep the wireless charging stand away from any liquids or moisture
  • The maximum ambient temperature during the use of this product must not exceed 45 C.
  • Do not place the device in fire or other excessively hot environments.
  • Only use a dry cloth or brush to clean this product.
  • Do not use if visible defects are observed on the wireless charging stand.

Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC Statements

This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference wil not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and the receiver
  • Connect the equipment to an outlet on a circuit
  • different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

Need help?
We‘d love to hear from you. Scan with your Walmart app and let us know what you think.

Download PDF:Onn. WIABLK100007907 2-in-1 Wireless Charging Pad User Manual

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals