BandG Flex-A-Lite 2600 Heavy Duty Spray Fogger User Manual

B and G Flex-A-Lite 2600 Heavy Duty Spray Fogger

Specifications

• Product: FLEX-A-LITE 2600 FOGGER
• Application: Pest management and disinfection
• Droplet Size Range: Power-mist to ultra low volume (ULV)
• Spray Range: Minimum of 13 feet (4 meters)

Product Usage Instructions

Before Use

1. Calibrate the fogger.
2. Fill the tank with the appropriate solution.
3. Place the fogger in the desired location.

Operation

1. Follow all “Before Use” instructions above.
2. Connect the fogger to the designated electrical power supply.
3. Turn on the fogger by moving the switch to the “on” position.
4. Select the appropriate droplet size based on your application needs.
5. Direct the fog to treatment areas using the flexible hose.
6. After use, close the adjustment knob, turn off the power, and then open the tank cap to prevent damage to the motor.

SAFETY

Please ensure you have read and fully understood the safety precautions before operating this appliance. Instructions for use of this product will vary depending on chemical applications. Always read the product label when preparing your solution.

• Always comply with any requirements for personal protective equipment (PPE) as required by the formulation

• This appliance is to be kept out of reach from children. However, it can be used by children aged 8 years and above, as well as persons with reduced physical, sensory or mental capacities or lack of experience and knowledge, provided they have been given supervision or instruction concerning use of the appliance in a safe way, and understand the hazards involved.

• Children should not play with, clean, or maintain the

• This fogger can be used with water-based, oil-based, and solvent-based

• Never direct fogging at live electrical items, animals, humans, etc. Remember to cover aquariums before fogging takes place.

• Remember to cover aquariums before fogging takes place.
  If the use of an extension lead/cord is required, ensure it is correctly rated for the product and is grounded. Only use an extension lead/cord which is properly rated for voltage, current, length, and which is free from nicks, cracks, and other signs of prior abuse. Replace damaged or worn electric lead/cord(s) immediately.

• Do not use a fogger that is broken or damaged in any Do not alter the fogger by adding or removing parts.

• Do not restrict the motor blower air intake area (located bottom of the unit).

DESCRIPTION

This heavy-duty fogger is ideal for pest management and disinfection because of it’s compact size, stability, and capacity. The droplet size varies from a power-mist to ultra low volume (ULV), depending on the flow rate and formulation, and is easily selected with the adjustment knob on the nozzle (see table below). Droplet spray extends a minimum of 13 feet (4 meters) from the nozzle and the flexible hose may be used to direct the fog for precision application.

BEFORE USE

Calibrate

• Turn the adjustment knob (at the end of the nozzle) to the right until closed/off.
• Push down on base of knob and turn to align the point of the knob with groove on the nozzle (Figures 1 and 2).
• Release base – this will set the point.
• Re-adjust to zero with every use.

Fill

• Do not add more than 1.5 gallons (5.7 litres) liquid total to the tank.
• Do not mix chemical in the tank; pre-mix and then add to the tank.
• Water-based, oil-based, and solvent-based formulations are appropriate.
• Mix all chemicals according to label directions.

Placement

• Never place fogger directly on floor.
• Elevate to keep dust and moisture out of

OPERATION

1. Follow all “Before Use” instructions
2. Connect unit to the designated electrical supply:
   • Do not connect 120V units to 230V
   • Do not connect 230V units to 120V
   • If using an extension lead/cord, ensure it’s 3-prong and
3. Turn on fogger by moving switch to “on.”
4. Turn the adjustment knob from ¼ of a turn to fully open depending on what droplet size is appropriate for your application (Figure 3). Note that droplet size varies with temperature and viscosity of the material being
5. Fog may be directed to treatment areas using the flexible
6. IMPORTANT: When the application is finished and there is any liquid in the tank, first close the adjustment knob and second, turn off the power (Figure 4). Only then, open the tank Failure to follow this sequence can result in liquid dripping from the hose into the motor, causing damage to the motor. Liquid found in the motor will VOID the warranty.

PARTS AND PART LIST

Setting

|

Description

| Droplet Size

(VMD, in

microns)

| Flow Rate

(oz/ml per min)

---|---|---|---
¼ Turn| Fog – Tiny droplets, not visible| 40| 0.33/9.76
½ Turn| Fog – Tiny droplets, not visible| 44| 0.75/22.19
¾ Turn| Mist – Larger droplets, visible| 52| 1.2/35.50
1 Turn| Mist – Larger droplets, visible| 56| 2.5/73.96

CARE, MAINTENANCE, AND PARTS

• Always empty and flush the tank and hose after each use; never leave chemicals in machine for extended periods of time. Inspect spray hose and electric cord for wear or damage.
• Protect nozzle when not in
• Clean the filters on the bottom plate of the fogger regularly by removing and gently rinsing with clean warm water, then allowing to fully dry before reinserting. Replace when damaged as these protect the motor.

| | Number| Description| Legacy Part Number|

Order Number

---|---|---|---
1| Clip| 29103230| 1608003992
2| Spring| 29103240| 1608003993
3| Venturi| 95151362| 1608004427
4| Knob and rod| 29103225| 1208001339
5| O-Ring| 29103220| 1608003991
6| Sleeve| 29103235| 1208001340
7| Screw| 29108215| 1608004029
8| Screw| 29103292| 1608004000
9| Hex nut| 29103297| 1608004003
10| Spacer| 29103299| 1608004005
11| Nozzle| 29103293| 1608004001
12| Spring clamp| 22071433| 1608003887
13| Screw| 29103294| 1608004002
14| Flex hose 18” (46 cm)| 29108247| 1208001381
| | 14| Flex hose 36” (91 cm)| 29108305| 1208001387
---|---|---|---
14| Flex hose 48” (122 cm)| 29108268| 1208001386
15| Spacer| 29108123| 1608004014
16| Screw| 29108121| 1608004013
17| Pressure tube| 29109182| 1208001360
18| Supply tube 18” (46 cm)| 29108188| 1208001365
18| Supply tube 36” (91 cm)| 29108189| 1208001366
18| Supply tube 48” (122 cm)| 29108184| 1208001361
19| 110v cord standard| 62031-1| 1608005005
19| 230V cord without plug| 29103275| 1208001342
19| 230V cord EU| 62058| 1608002814
19| 230V cord UK| 62059| 1608002815
20| Switch| 29108135| 1608004015
20| 230v switch| 29103270| 1608003995
21| Switch boot| 23089190| 1608003922
22| Strain relief| 29108165| 1608004020
23| Cap and O-ring| 22071003| 1208001279
24| Nozzle assembly

(includes parts 1-13)

| 29108246| 1208001380
25| Tube retainer| 29103298| 1608004004
26| Item #17|  |
27| Strainer| 29108140| 1608004016
28| Wire connector| 29108160| 1608004024
| | 29| Grommet| 29108156| 1608004021
---|---|---|---
| | 30| Open|  |
---|---|---|---
31| Item #18|  |
32| EMI Filter| 62047-1| 1208002361
33| Motor 110V| 29108190| 1208001367
33| Motor 230V| 29108195| 1208001372
34| Motor guard

(includes air filter)

| 29108105| 1208001356
35| Screw| 29108110| 1608004012
36| Tank Grey| 95122955| 1208001550
36| Tank Lt Blue| 95122954| 1208001549
37| Dome Grey 110V| 95122949| 1208001547
37| Dome Lt Blue 230V| 95122942| 1208001542
---|---|---|---
38| Screw| 22071045| 1608003880
39| Mount plate| 29103295| 1208001344

WIRING INSTRUCTIONS (UK and EU Only)

As the colors of the wire in the mains lead of this appliance may not correspond with the color marking identifying the terminals on your plug, proceed as follows:

• The wire which is colored BLUE must be connected to the terminal which is marked with the letter
• The wire which is colored BROWN must be connected to the terminal which is marked with the letter
• The wire which is colored YELLOW & GREEN must be connected to the terminal which is marked with the letter E or the symbol .

United Kingdom

This appliance is supplied fitted with a BS1363 mains plug and a BS1362 10A fuse. If this plug is removed from the appliance, please ensure it is disposed of safely as a disconnected plug is dangerous if reconnected to the mains. If any other type of plug is used, a 10A fuse must be fitted.

European Union

This appliance is supplied fitted with a Schuko mains plug. If this plug is removed from the appliance, please ensure it is disposed of safely as a disconnected plug is dangerous if reconnected to the mains.

TROUBLESHOOTING

DISPOSAL

United Kingdom / European Union

Private UK/ EU households: Information on Disposal for Users of WEEE

This symbol (Figure 5) on the product(s) and / or accompanying documents means that used electrical and electronic equipment (WEEE) should not be mixed with general household Figure 5 __ waste.

For proper treatment, recovery and recycling, please take this product (s) to designated collection points where it will be accepted free of charge.

Alternatively, in some countries, you may be able to return your products to your local retailer upon purchase of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.

Professional Users in the European Union

If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further information.

All Other Countries

This symbol is only valid in the European Union (EU). If you wish to discard of this product, please contact your local authorities or dealer and ask for the correct method of disposal.

WARRANTY

Pelsis products are designed and manufactured to the highest standards and deliver high-quality performance, ease of use and ease of installation. If you encounter any difficulties while using your product, we recommend that you first consult the user manual or the information in the support section of our website. In the unlikely event of a fault, please contact your retailer or distributor for further warranty information.

Any warranty claims must be supported by proof of purchase within the warranty period (product dependent), the following exclusions apply:

• Normal wear & tear
• Damage caused by abuse, misuse, alterations, not following the instructions in the instruction manual or not completing  the recommended maintenance.

This warranty does not affect your statutory rights.

bgequip.com

CONTACT

Contact your local distributor or Pelsis country-specific location for information on spares and services.

• US: B&G Equipment, 135 Region South, Jackson, GA, 30233, USA Contact Number: 1-800-544-8811
• Email Address: CustomerService@BGEquip.com
• UK: Pelsis Ltd, Sterling House, Grimbald Crag Close, Knaresborough, HG5 8PJ, UK.
• Contact Number: +44 (0) 800 988 5359
• Europe: Pelsis Belgium NV, Industrieweg 15, 2880, Bornem, Belgium.
• Contact Number: +32 (0) 3 886 22 11
• All Other Countries: B&G Equipment, 135 Region South, Jackson, GA, 30233, USA
• Contact Number: +1-678-688-5601
• Email Address: CustomerService@BGEquip.com

FAQ

Q: What should I do if liquid is found in the motor?

A: If liquid is found in the motor, it can void the warranty. To prevent this, follow the proper sequence of closing the adjustment knob, turning off the power, and then opening the tank cap after use.

Q: How should I clean and maintain the fogger?

A: Clean the fogger by removing parts and rinsing them with warm water. Allow them to dry completely before reassembling. Replace damaged parts promptly to protect the motor.

References

• B&G Equipment Company

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>